GWR 3150 Class

Last updated

GWR 3150 Class [1]
Gloucester GW Locomotive Depot geograph-2547177-by-Ben-Brooksbank.jpg
3171 at Gloucester (Horton Road) Depot 1948
Type and origin
Power typeSteam
DesignerGeorge Jackson Churchward
BuilderGWR Swindon Works
Order numberLots 159, 169, 172
Serial number2157, 2239–2258, 2280–2299
Build date1906–1908
Total produced41
Specifications
Configuration:
   Whyte 2-6-2T
Gauge 4 ft 8+12 in (1,435 mm) standard gauge
Leading dia. 3 ft 2 in (0.965 m)
Driver dia.5 ft 8 in (1.727 m)
Trailing dia. 3 ft 8 in (1.118 m)
Length41 ft 0 in (12.50 m) over buffers
Loco weight64 long tons 13 cwt (144,800 lb or 65.7 t)
(65.7 t; 72.4 short tons) empty
81 long tons 12 cwt (182,800 lb or 82.9 t)
(82.9 t; 91.4 short tons) full
Fuel type Coal
Water cap.2,000 imp gal (9,100 L; 2,400 US gal)
Firebox:
  Grate area20.56 sq ft (1.910 m2)
BoilerGWR Standard No. 4
Boiler pressure200 lbf/in2 (1.38 MPa)
Heating surface:
  Tubes1,349.64 sq ft (125.386 m2)
  Firebox128.72 sq ft (11.958 m2)
Cylinders Two, outside
Cylinder size 18+12 in × 30 in (470 mm × 762 mm)
Valve gear Stephenson
Valve type Piston valves
Train brakes Vacuum
Performance figures
Tractive effort 25,670 lbf (114.2 kN)
Career
Power class4MT
Number in class41
Numbers3150-3190
First run1907

The Great Western Railway (GWR) 3150 Class was a class of 2-6-2T side tank steam locomotive.

Contents

History

Churchward based the 3150 class on his 3100 (later 5100) class. They used the larger and heavier Standard 4 boiler and so had greater boiler capacity, but were consequently heavier and thus restricted to Red routes. They were principally heavy suburban passenger traffic engines. Five of the class were rebuilt into the Collett 3100 Class. None of the class were preserved.

Table of orders and numbers [2]
YearQuantityLot No.Works Nos.Locomotive numbersNotes
1906115921573150
1907201692239–22583151–3170
1907–08201722280–22993171–3190

See also

Related Research Articles

<span class="mw-page-title-main">GWR 3700 Class</span> Class of two-cylinder 4-4-0 locomotives

The Great Western Railway 3700 Class, or City Class, locomotives were a series of twenty 4-4-0 steam locomotives, designed for hauling express passenger trains.

<span class="mw-page-title-main">GWR 3200 Class</span>

The Great Western Railway 3200 Class was a design of 4-4-0 steam locomotive for passenger train work. The nickname for this class, almost universally used at the time these engines were in service was Dukedog since the locomotives were composed of former Duke Class boilers on Bulldog Class frames. As such they were one of the last standard gauge steam locomotive classes to retain outside frames.

<span class="mw-page-title-main">GWR 4200 Class</span> Class of 2-8-0T steam locomotives

The Great Western Railway (GWR) 4200 Class is a class of 2-8-0T steam locomotives.

<span class="mw-page-title-main">GWR 5101 Class</span>

The GWR 5101 Class or 'Large Prairie' is a class of 2-6-2T steam locomotives of the Great Western Railway.

<span class="mw-page-title-main">GWR 2884 Class</span> Class of 2-8-0 steam locomotive

The Great Western Railway (GWR) 2884 Class is a class of 2-8-0 steam locomotive. They were Collett's development of Churchward's earlier 2800 Class and are sometimes regarded as belonging to that class.

<span class="mw-page-title-main">GWR 2251 Class</span>

The Great Western Railway (GWR) 2251 Class or Collett Goods Class was a class of 0-6-0 steam tender locomotives designed for medium-powered freight. They were introduced in 1930 as a replacement for the earlier Dean Goods 0-6-0s and were built up to 1948.

<span class="mw-page-title-main">GWR 2800 Class</span>

The Great Western Railway (GWR) 2800 Class is a class of Churchward-designed 2-8-0 steam locomotive.

<span class="mw-page-title-main">GWR 4300 Class</span> Class of 342 two-cylinder 2-6-0 locomotives

The Great Western Railway (GWR) 4300 Class is a class of 2-6-0 (mogul) steam locomotives, designed by G.J. Churchward for mixed traffic duties. 342 were built from 1911–1932.

<span class="mw-page-title-main">GWR 5600 Class</span> Steam locomotive

The GWR 5600 Class is a class of 0-6-2T steam locomotive built between 1924 and 1928. They were designed by Charles Collett for the Great Western Railway (GWR), and were introduced into traffic in 1924. After the 1923 grouping, Swindon inherited a large and variable collection of locomotives from historic Welsh railway companies, which did not fit into their standardisation programme. GWR boiler inspectors arrived en masse and either condemned the original locomotives or had them rebuilt. The systematic destruction of many examples of locomotives, most still in serviceable condition, followed, but various were worked alongside 5600 Class.

<span class="mw-page-title-main">GWR 2221 Class</span>

The Great Western Railway (GWR) 2221 Class or County Tank was a class of 4-4-2T steam locomotive, effectively a tank engine version of the 3800 "County" Class 4-4-0 tender locomotives. The two classes had different boilers, standard no 4 for the tender locomotive, and the smaller standard no 2 for the tank. 2230 was fitted with the larger boiler when new, but this was unsuccessful and was quickly altered.

<span class="mw-page-title-main">GWR 4500 Class</span>

The Great Western Railway (GWR) 4500 Class or Small Prairie is a class of 2-6-2T steam locomotives.

<span class="mw-page-title-main">GWR 6100 Class</span>

The GWR 6100 Class is a class of 2-6-2T side tank steam locomotives.

The Great Western Railway (GWR) 3100 Class was a class of 2-6-2T side tank steam locomotive.

<span class="mw-page-title-main">GWR 4400 Class</span>

The Great Western Railway (GWR) 4400 Class was a class of 2-6-2T side tank steam locomotive.

<span class="mw-page-title-main">GWR 5100 Class</span>

The Great Western Railway (GWR) GWR 5100 Class was a class of 2-6-2T side tank steam locomotives. It was the first of a series of broadly similar classes used principally for suburban passenger services.

The GWR 2201 Class was a class of 4 ft 8+12 instandard gauge2-4-0 steam locomotives built at Swindon Works under the aegis of William Dean for express passenger service on the Great Western Railway. Built in 1881–82, they were numbered 2201 to 2220.

<span class="mw-page-title-main">GWR 455 Class</span>

The GWR 455 Class, also called the "Metropolitan" or "Metro" Tanks, was a series of 140 2-4-0T locomotives built for the Great Western Railway, originally for their London suburban services, including running on the underground section of the Metropolitan Railway, the source of their nickname. Later on the class was seen on many other parts of the GWR system. Sixty "Metro" Tanks were built, from 1868 onwards, during the lifetime of their designer, Joseph Armstrong. His successor William Dean regarded the class so highly that he would add a further 80, the final 20 examples appearing as late as 1899. The "Metros" were all built at Swindon Works, in nine lots of ten or 20 engines each.

<span class="mw-page-title-main">GWR 1813 Class</span>

The Great Western Railway's 1813 Class was a series of 40 0-6-0T built at Swindon Works in two lots of 20 engines each. No. 1813 was sold to the Pembroke & Tenby Railway in May 1883 becoming No.7 Holmwood, retaining this name after being absorbed by the GWR. Nearly all of these engines spent their lives on the GWR's Southern Division.

<span class="mw-page-title-main">GWR 1661 Class</span>

The 1661 Class was William Dean's second design of tank locomotive for England's Great Western Railway. Like the 1813 Class which preceded them, there were 40 1661s, turned out of Swindon Works in two batches.

The 3001 Class as constructed by William Dean at the Swindon Works of the Great Western Railway in 1891-2 was the culmination of the tradition of GWR 2-2-2 locomotives that had begun with Gooch's North Star over 50 years earlier. The 3001s, which had 7 ft 9 in (2.362 m) driving wheels, were built in two batches:

References

  1. GWR Engines - Names, Numbers, Types, Classes, ETC. of Great Western Railway Locomotives. Great Western Railway. 1938. p. 70.
  2. Allcock et al. (1968), pp. 30–31.