GWR Leo Class

Last updated

GWR Leo class
GWR Leo Class 2-4-0 Locomotive.jpg
Type and origin
Power typeSteam
Designer Daniel Gooch
Builder
Total produced18
Specifications
Configuration:
   Whyte 2-4-0
   UIC 1B n2
Gauge 7 ft 14 in (2,140 mm)
Leading dia. 3 ft 6 in (1.067 m)
Driver dia.5 ft 0 in (1.524 m)
Wheelbase Loco: 12 ft 9 in (3.886 m)
Firebox:
  Firegrate area
11.5 sq ft (1.07 m2)
Boiler50 lbf/in2 (340 kPa)
Heating surface:
  Tubes
396 sq ft (36.8 m2)
  Firebox71 sq ft (6.6 m2)
Cylinder size 15 in × 18 in (381 mm × 457 mm)
Performance figures
Tractive effort 2,868 lbf (12.76 kN)
Career
Operators Great Western Railway
Withdrawn1864 - 1874
DispositionAll scrapped

The Great Western Railway Leo Class 2-4-0 was a class of broad gauge steam locomotives for goods train work. This class was introduced into service between January 1841 and July 1842, and withdrawn between September 1864 and June 1874.

Contents

These locomotives were the first for the railway with coupled wheels as they were designed as goods locomotives, but they later found use on passenger trains too. All the class were altered to 2-4-0 ST s.

The locomotives were built by three different workshops, each with its own naming convention. The first three came from R and W Hawthorn and Company, who named them after strong animals. The next three were named after volcanoes by Fenton, Murray and Jackson, while the final twelve came from Rothwell and Company carrying the names of the twelve houses of the zodiac.

Locomotives

NameManufacturerSerial
BuiltWithdrawnNotes
Elephant R. & W. Hawthorn & Co. 319January 1841December 1870
Buffalo R. & W. Hawthorn & Co.320March 1841April 1865
Dromedary R. & W. Hawthorn & Co.321March 1841December 1866
Hecla Fenton, Murray and Jackson 35April 1841September 1864 [Note 1]
Stromboli Fenton, Murray and Jackson36April 1841July 1870
Etna Fenton, Murray and Jackson37June 1841December 1870
Aries Rothwell and Company 66June 1841June 1871
Taurus Rothwell and Company67July 1841December 1870 [Note 2]
Gemini Rothwell and Company68September 1841March 1866
Cancer Rothwell and Company69October 1841June 1874
Leo Rothwell and Company70October 1841December 1870
Virgo Rothwell and Company71December 1841December 1870
Libra Rothwell and Company72February 1842June 1871
Scorpio Rothwell and Company73February 1842December 1872
Sagittarius Rothwell and Company74April 1842June 1871 [Note 3]
Capricornus Rothwell and Company75April 1842July 1870 [Note 4]
Aquarius Rothwell and Company76June 1842July 1870
Pisces Rothwell and Company77July 1842June 1874 [Note 5]

Notes

  1. Hecla: On 24 December 1841 it was involved in a fatal accident in Sonning Cutting near Reading. It was hauling a so-called "baggage train" consisting of both passenger and goods trucks, when it ran into an earth slip in the cutting, killing eight passengers. At the coroner's inquest on the passengers killed the jury returned a verdict of accidental death in all cases and a deodand of one thousand pounds on the engine, tender and carriages. The deodand was later overturned.
  2. Taurus: worked the first South Devon Railway train from Newton to Torquay on 18 December 1848.
  3. Sagittarius: worked the first train to Warminster on 9 September 1851.
  4. Capricorn: Along with Pisces, worked the first train from Totnes to Laira, the temporary terminus of the South Devon Railway at Plymouth on 5 May 1848.
  5. Pisces:Along with Capricornus, worked the first train from Totnes to Laira, the temporary terminus of the South Devon Railway at Plymouth on 5 May 1848.

Related Research Articles

<span class="mw-page-title-main">Great Western Railway</span> British railway company (1833–1947)

The Great Western Railway (GWR) was a British railway company that linked London with the southwest, west and West Midlands of England and most of Wales. It was founded in 1833, received its enabling Act of Parliament on 31 August 1835 and ran its first trains in 1838 with the initial route completed between London and Bristol in 1841. It was engineered by Isambard Kingdom Brunel, who chose a broad gauge of 7 ft —later slightly widened to 7 ft 14 in —but, from 1854, a series of amalgamations saw it also operate 4 ft 8+12 in standard-gauge trains; the last broad-gauge services were operated in 1892.

<span class="mw-page-title-main">South Devon Railway (heritage railway)</span> Heritage railway in Devon, England

The South Devon Railway (SDR) is a 6.64-mile (10.69 km) heritage railway from Totnes to Buckfastleigh in Devon. Mostly running alongside the River Dart, it was initially known as the Dart Valley Railway. The railway is now operated by the South Devon Railway Trust, a registered charity.

<span class="mw-page-title-main">Newton Abbot railway station</span> Railway station in Devon, England

Newton Abbot railway station serves the town of Newton Abbot in Devon, England. It is 214 miles 5 chains (345 km) from London Paddington. The station today is managed by Great Western Railway, who provide train services along with CrossCountry.

<span class="mw-page-title-main">Totnes railway station</span> Railway station in Devon, England

Totnes railway station serves the towns of Totnes and Dartington in Devon, England. It was opened by the South Devon Railway Company in 1847. Situated on the Exeter to Plymouth Line, it is 222 miles 66 chains measured from the zero point at London Paddington via Box.

<span class="mw-page-title-main">Cornwall Railway</span> Former railway company in southwestern England

The Cornwall Railway was a 7 ft 14 in broad gauge railway from Plymouth in Devon to Falmouth in Cornwall, England, built in the second half of the nineteenth century. It was constantly beset with shortage of capital for the construction, and was eventually forced to sell its line to the dominant Great Western Railway.

<span class="mw-page-title-main">Plymouth Millbay railway station</span> Former railway station in Plymouth, England

Plymouth Millbay railway station was the original railway terminus in Plymouth, Devon, England. It was used for passenger trains from 1849 to 1941. It was rebuilt in 1903.

<span class="mw-page-title-main">Bristol and Exeter Railway</span> Former English railway company

The Bristol and Exeter Railway (B&ER) was an English railway company formed to connect Bristol and Exeter. It was built on the broad gauge and its engineer was Isambard Kingdom Brunel. It opened in stages between 1841 and 1844. It was allied with the Great Western Railway (GWR), which built its main line between London and Bristol, and in time formed part of a through route between London and Cornwall.

<span class="mw-page-title-main">Laira Traction and Rolling Stock Maintenance Depot</span> Train maintenance facility in South West England

Laira Traction and Rolling Stock Maintenance Depot is a railway traction maintenance depot situated in Plymouth, Devon, England. The depot is operated by Great Western Railway (GWR) and is where their fleet of High Speed Trains are overhauled along with those belonging to CrossCountry. These will be withdrawn in 2023 but it will then become the principal depot for GWR's Class 802 InterCity Express Trains. Other trains visit for daily servicing.

The Buckfastleigh, Totnes and South Devon Railway built the broad gauge railway line from Totnes to Buckfastleigh and Ashburton in Devon, England.

The Comet class were 12 4-4-0ST broad gauge locomotives operated on the South Devon Railway and associated railways. They were designed for passenger trains on this steep and sharply curved line but were also used on goods trains when required.

The four Tornado class locomotives were 0-6-0ST broad gauge locomotives operated on the South Devon Railway and associated railways. They were designed for goods trains but were also used on passenger trains when required.

South Devon Railway <i>Dido</i> class Class of 8 British broad-gauge 0-6-0ST locomotives

The eight Dido class locomotives were 0-6-0ST broad gauge locomotives operated on the South Devon Railway and Cornwall Railway and associated other adjacent railways. They were designed for goods trains but were also used on passenger trains when required.

<span class="mw-page-title-main">South Devon and Tavistock Railway</span>

The South Devon and Tavistock Railway linked Plymouth with Tavistock in Devon; it opened in 1859. It was extended by the Launceston and South Devon Railway to Launceston, in Cornwall in 1865. It was a broad gauge line but from 1876 also carried the standard gauge trains of the London and South Western Railway between Lydford and Plymouth: a third rail was provided, making a mixed gauge. In 1892 the whole line was converted to standard gauge only.

The South Devon Railway Company built and operated the railway from Exeter to Plymouth and Torquay in Devon, England. It was a 7 ft 14 in broad gauge railway built by Isambard Kingdom Brunel.

<span class="mw-page-title-main">North Devon Railway</span> Former English railway company

The North Devon Railway was a railway company which operated a line from Cowley Bridge Junction, near Exeter, to Bideford in Devon, England, later becoming part of the London and South Western Railway's system. Originally planned as a broad gauge feeder to the Bristol & Exeter Railway, it became part of a battle between the broad gauge group and the standard gauge railway interests. In this context, standard gauge lines were often described as narrow gauge.

<span class="mw-page-title-main">Disused railway stations on the Exeter to Plymouth Line</span>

There are eleven disused railway stations on the Exeter to Plymouth line between Exeter St Davids and Plymouth Millbay in Devon, England. At eight of these there are visible remains.

The South Devon Banks are a series of steep inclines on the ex-GWR railway line linking Exeter and Plymouth in Devon, England. These two cities are separated by the rocky uplands of Dartmoor forcing the early railway surveyors to propose that the line skirt the difficult terrain of the comparatively sparsely populated moorland. Isambard Kingdom Brunel, in surveying the South Devon Railway, opted to push a line along a coastal strip between the Exe and Teign valleys, and then to climb the southern outliers of Dartmoor making for the head of the Plym estuary. From Newton Abbot, the line climbs Dainton Bank, and from Totnes it climbs Rattery Bank, reaches a peak at Wrangaton summit, and then descends Hemerdon Bank to reach Plymouth. These three are collectively known as the South Devon Banks.

<span class="mw-page-title-main">Railways in Plymouth</span> Overview of railways in Plymouth, Devon, England

The network of railways in Plymouth, Devon, England, was developed by companies affiliated to two competing railways, the Great Western Railway and the London and South Western Railway. At their height two main lines and three branch lines served 28 stations in the Plymouth area, but today just six stations remain in use.

<span class="mw-page-title-main">Plymouth to Yealmpton Branch</span>

The Plymouth to Yealmpton Branch was a Great Western Railway single track branch railway line in Devon, England, that ran from Plymstock to Yealmpton. The line was planned as part of a route to Modbury, but the scheme was cut back to Yealmpton; it opened in 1898, and the passenger train service ran from Plymouth Millbay, but road competition led to declining usage and the passenger service was withdrawn in 1930.

<span class="mw-page-title-main">Exeter–Plymouth line</span> Railway line in Devon, England

The Exeter–Plymouth line, also called the South Devon Main Line, is a central part of the trunk railway line between London Paddington and Penzance in the southern United Kingdom. It is a major branch of the Great Western Main Line and runs from Exeter St Davids to Plymouth, from where it continues as the Cornish Main Line. It was one of the principal routes of the Great Western Railway which in 1948 became part of the Western Region of British Railways and are now part of the Network Rail system.

References