Stansted Mountfitchet Windmill

Last updated

Stansted Mill
Stansted Mountfitchet mill.jpg
The restored mill, October 2007
Stansted Mountfitchet Windmill
Origin
Mill nameStansted Mill
Mill location TL 509 248
Coordinates 51°54′04″N0°11′38″E / 51.901°N 0.194°E / 51.901; 0.194 Coordinates: 51°54′04″N0°11′38″E / 51.901°N 0.194°E / 51.901; 0.194
Operator(s)Private
Year built1787
Information
Purpose Corn mill
Type Tower mill
StoreysFive storeys
No. of sailsFour sails
Type of sails Patent sails
Windshaft cast iron
Winding Fantail
Fantail bladesEight blades
No. of pairs of millstonesThree pairs

Stansted Mountfitchet Windmill is a grade II* listed [1] Tower mill at Stansted Mountfitchet, Essex, England which is also a Scheduled Ancient Monument. [2] [3] It has been restored and can turn by wind.

Contents

History

Stansted Mountfitchet Windmill was built in 1787 for Joseph Lindsell. [4] Lindsell sold the mill in 1807 to Henry Chaplin, who mortgaged the mill to Robert Sworder in April 1808. Chaplin died in 1844 and the mill was offered for sale by auction on 22 December 1846 without a buyer being found. [5]

In 1847, it was reported that one pair of sails required replacement. The old Common sails were replaced with a pair of Spring sails at a cost of £29 4s 0d by Thomas Seabrook, millwright of Furneaux Pelham, Hertfordshire. In March 1848, it was reported that one of the remaining Common sails had blown down, and the remaining sail was not fit for further work. A pair of “new Patent sails” was fitted at a cost of £12 5s 0d, with a new sail back costing a further £5 13s 4d. In November 1848 the mill was again working on two sails, and another pair of Patent sails were fitted at a cost of £23. Hicks demanded a reduction in rent from £60 to £45 per annum at midsummer 1850, which he was successful in obtaining. [5] In 1850, Hicks wrote “The mill has ground scarcely anything for the last month for want of wind there is great loss of time often. A windmill is not worth much with the present trade.”

Hicks left the mill in 1853, and recommended William Randall Dixon to be the next tenant. Dixon took the mill on a seven-year lease at £45 in May that year. A bake office was built in February 1854 at Dixon's request and the rent was increased to £55. An oak stock was reported as cracked at about this time, and the mill was again reduced to two sails in September 1854 as a stock was defective. Dixon left the mill in 1856 and Edward Hicks again took the tenancy of the mill. [5]

In 1860 Hicks asked for the mill to be modernised and asked the owner to install a steam engine to assist the sails. That proposal was rejected, but a new windshaft was required and a fantail was asked for in return for an increase in rent. The cap frame was also repaired, with a new weatherbeam fitted. [5] A new cast iron windshaft was fitted by Seabrook at a cost of £25. Seabrook fitted a new fantail in that year at a cost of a further £25. [6] Hicks left the mill in June 1861, and a local man by the name of Ervin took the mill at a reduced rent of £40. [5] In 1862, millwright Fyson of Soham remodelled the machinery, converting the mill from an underdrift mill to an overdrift mill [6] at a cost of £58 13s 7d. The stage and round house were removed at this time. John Buck took the mill in 1863 at a rent of £20, and reported that various work done by Fyson was faulty. Rectification was carried out by Seabrook. The mill was sold to William White in January 1865 for £1,150. [5]

By 1870, the mill had four double Patent sails which were over 7 feet (2.1 m) wide. [6] The mill last worked commercially in 1910 to crush oats. [4] In 1930, the tower had to be strengthened with three iron bands [6] and in 1934 the second Lord Blyth had the mill repaired and presented it to the parish. [4] The mill served as a Scout hut from the 1940s to 1963. It was scheduled as an Ancient Monument in 1952. The mill was opened to the public for the first time in 1964, with restoration work being done in 1966. [3] In 1984–5, the mill was repaired by Millwrights International of Mapledurham, Berkshire at a cost of £14,000. The work enabled both the cap and sails to turn. [4] In 2003, the mill was struck by lightning during an open day. [3] In 2005, it was reported that repairs costing £70,000 were needed. [7] An appeal to local residents for support in raising money towards the repair of the mill was generally ignored, despite leafletting every house in Stansted Mountfitchet. [8]

Description

Stansted Mountfitchet Windmill is a five-storey tower mill with a domed cap winded by an eight bladed fantail. [4] The tower is 21 feet 6 inches (6.55 m) diameter at base, and 10 feet (3.05 m) diameter at curb level. The brickwork is only 27 inches (690 mm) thick at ground level, and generally only about 18 inches (460 mm) at higher levels. This has resulted in a weak tower which required strengthening with three iron bands. Height of the tower is 47 feet (14.33 m) from ground level to curb. the cap is 10 feet (3.05 m) from curb to roof hatch, giving the mill an overall height of 57 feet (17.37 m) [6] The cast iron windshaft is in two parts, with a separate tail section. It carries four Single Patent sails (originally double Patents, later cut down), and a wooden 8 feet (2.44 m) diameter clasp arm brake wheel of oak and elm with 99 iron segment teeth. This drives a wooden wallower with 44 teeth carried on a wooden upright shaft. The clasp arm great spur wheel is 8 feet (2.44 m) diameter, with 140 cogs. It drives three pairs of overdrift millstones. The stone nuts having 28 teeth each. [6]

As originally built, the mill had a wooden windshaft, and a stage, which was 24 feet (7.32 m) above ground level. The mill was built with four Common sails carried on a wooden windshaft. The cap was winded by hand. The mill was originally an underdrift mill, with the millstones a floor higher than they are now. [6] A lean-to structure known as the roundhouse was attached to the mill below stage level. [5]

Millers

References for above:- [4] [5]

Public access

Stansted Mountfitchet Windmill is operated on behalf of the Trustees by a voluntary organisation called 'The Stansted Millers'. They administer the public access and it is open from Easter to October on the first Sunday of each month, Bank Holidays and other special days from 1.30 - 5.30pm. The admission charge is £2 for adults, 50p for children 5-16 and is free to under 5s. [9]

Related Research Articles

<span class="mw-page-title-main">Upminster Windmill</span>

Upminster Windmill is a Grade II* listed smock mill located in Upminster in the London Borough of Havering, England. It was formerly known as Abraham's Mill and was in Essex when built. It has been restored and is a museum open to the public at selected times.

<span class="mw-page-title-main">John Webb's Mill, Thaxted</span> Historic building in Essex, United Kingdom

John Webb’s or Lowe’s Mill is a Grade II* listed tower mill at Thaxted, Essex, England, which had been restored to working order, but is currently out of action following the loss of a sail in April 2010.

<span class="mw-page-title-main">Shirley Windmill</span> Windmill in south London

Shirley Windmill is a Grade II listed tower mill in Shirley, in the London Borough of Croydon, England which has been restored to working order.

<span class="mw-page-title-main">Union Mill, Cranbrook</span>

Union Mill is a Grade I listed smock mill in Cranbrook, Kent, England, which has been restored to working order. It is the tallest smock mill in the United Kingdom.

<span class="mw-page-title-main">Reigate Heath Windmill</span>

Reigate Heath Windmill is a grade II* listed post mill at Reigate Heath, Surrey, England which has been restored and is used as a chapel. It is thought to be the only windmill in the world which is a consecrated church.

<span class="mw-page-title-main">Wray Common Mill, Reigate</span>

Wray Common Mill is a grade II* listed tower mill at Reigate, Surrey, England which has been converted to residential use.

<span class="mw-page-title-main">Aythorpe Roding Windmill</span>

Aythorpe Roding Windmill is a Grade II* listed Post mill at Aythorpe Roding, Essex, England which has been restored to working order.

<span class="mw-page-title-main">Bocking Windmill</span>

Bocking Windmill or Bocking Churchstreet Windmill is a grade I listed post mill at Bocking, Essex, England which has been restored.

<span class="mw-page-title-main">Ramsey Windmill, Essex</span>

Ramsey Windmill is a grade II* listed post mill at Ramsey, Essex, England which has been restored.

<span class="mw-page-title-main">Baker Street Mill, Orsett</span> Smock mill in Essex, England

Baker Street Mill is a grade II listed smock mill at Baker Street, Orsett, Essex, England which has been part adapted to residential use on its lower two floors only.

<span class="mw-page-title-main">Terling Windmill</span>

Terling Windmill is a grade II listed Smock mill at Terling, Essex, England, which has been converted to residential use.

<span class="mw-page-title-main">South Ockendon Windmill</span>

South Ockendon Windmill was a Smock mill at South Ockendon, Essex, England which collapsed on 2 November 1977.

Debden Windmill is a grade II listed Tower mill at Debden, Essex, England which has been converted to residential use.

<span class="mw-page-title-main">Gibraltar Mill, Great Bardfield</span>

Gibraltar Mill is a grade II listed Tower mill at Great Bardfield, Essex, England which has been converted to residential use.

Church End Mill is a grade II listed Tower mill at Great Dunmow, Essex, England which has been converted to residential use.

<span class="mw-page-title-main">Rayleigh Windmill</span>

Rayleigh Windmill is a grade II listed Tower mill at Rayleigh, Essex, England which has been restored as a landmark and is used as a museum.

<span class="mw-page-title-main">Stock Windmill</span>

Stock Windmill is a grade II* listed tower mill at Stock, Essex, which has been restored.

<span class="mw-page-title-main">Messing Maypole Mill</span>

Messing Maypole Mill is a grade II listed Tower mill at Tiptree, Essex, England which has been converted to a residence. Prior to boundary changes made when the civil parish of Tiptree was established in 1934, the mill was in the parish of Tolleshunt Knights.

<span class="mw-page-title-main">Gainsford End Mill, Toppesfield</span>

Gainsford End Mill is a grade II listed tower mill at Gainsford End, near Toppesfield, Essex, England, which has been converted to a residence.

<span class="mw-page-title-main">White Roding Windmill</span>

White Roding Windmill is a Grade II listed preserved tower mill at White Roding, Essex, England.

References

  1. Historic England. "WINDMILL, MILL SIDE, STANSTED MOUNTFITCHET, UTTLESFORD, ESSEX (1221435)". National Heritage List for England . Retrieved 10 August 2008.
  2. Historic England. "Stanstead Windmill (373586)". Research records (formerly PastScape). Retrieved 7 April 2009.
  3. 1 2 3 "History". Stansted Mountfitchet Windmill. Retrieved 11 August 2008.
  4. 1 2 3 4 5 6 Farries, Kenneth (1988). Essex Windmills, Millers and Millwrights - Volume Five - A Review by Parishes, S-Z. Edinburgh: Charles Skilton. pp. 33–37. ISBN   0-284-98821-9.
  5. 1 2 3 4 5 6 7 8 Farries, Kenneth (1981). Essex Windmills, Millers and Millwrights - Volume One – An Historical Review. London & Edinburgh: Charles Skilton. pp. 73–78. ISBN   0-284-98641-0.
  6. 1 2 3 4 5 6 7 Farries, Kenneth (1982). Essex Windmills, Millers and Millwrights - Volume Two – A Technical Review. London & Edinburgh: Charles Skilton. pp. 78–81, 99. ISBN   0-284-98637-2.
  7. "Stansted windmill appeals to local community for funding". Windmill World. Retrieved 11 August 2008.
  8. "Stansted windmill response has been low key". Windmill World. Retrieved 11 August 2008.
  9. "Local attractions". Stansted.net. Archived from the original on 31 May 2006. Retrieved 11 August 2008.