| Carat A | |
|---|---|
 | |
| General information | |
| Type | High performance motorglider |
| National origin | Germany |
| Manufacturer | AMS-Flight, Ljubljana |
| Number built | 31 by September 2009 |
| History | |
| First flight | 16 December 1997 |
The AMS-Flight Carat A is a single-seat, high performance motorglider. The sailplane was originally designed and built by Technoflug in Germany and is now manufactured by AMS-Flight in Slovenia. [1] [2]
The Carat was designed by Technoflug around the wings and horizontal tail of the Schempp-Hirth Discus sailplane, marrying these to a new fuselage, fin, undercarriage and engine.. Structurally the aircraft is a mixture of fibreglass and carbon fibre composites. The wings have PVC foam cores. In plan the wings have parallel chord inner panels and two outer sections of increasing straight taper. Winglets are an option. Schempp-Hirth type airbrakes are mounted on the upper surfaces of the inner panels, with turbulators on the underside to ensure a controlled boundary layer transition from laminar to turbulent flow without separation. The wings have 3° of dihedral. [1]
Though the Discus and the Carat share wings, they position them differently: the Discus is a mid-wing aircraft, the Carat a low-wing one. Like the Discus, the Carat has a high T-tail with separate tailplane and elevators. The tailplane, like the wings, is detachable for easy transport. The cockpit, enclosed in a large clear single piece canopy, is at the trailing edge of the wing, with the main spar under the pilot's knees. The Carat has a conventional electrically-operated inwardly retractable undercarriage. The main wheels have hydraulically operated disc brakes and there is a parking brake. The non-retractable tailwheel is steerable. [1]
The Carat is powered by an air-cooled, four cylinder, Volkswagen derived, 40 kW (54 hp) Sauer S1800 piston engine. This drives the unique feature of the Carat, its folding two blade propeller: the blades fold forward like spears to minimize drag when the engine is off. This is in contrast to other motorgliders which mostly either store the propeller inside the fuselage, or merely feather the propeller blades. The Carat's propeller is opened by the centrifugal force on the turning blades, working against a folding force provided by a gas damping spring mechanism. [1] This folding mechanism has the advantage of simplicity, but it means that the engine can not be windmill-started if the battery is flat. Because of the forward pointing blades when the engine is off, the Carat cannot be towed aloft like traditional sailplanes.[ citation needed ]
The first flight was made on 16 December 1997 and the first production model displayed at Aero '99 at Friedrichshafen in April 1999 as the Technoflug TFK-2 Carat. Certification was achieved in 2003, by which time marketing had been passed to AMS. [1]
Six production aircraft had been built by the end of 2003 and thirty one by September 2009. The majority of these were flying in the United States, the rest mostly in Western Europe. [1]
Data from Jane's All the World's Aircraft 2011/12 [1]
General characteristics
Performance
The Schempp-Hirth Discus is a Standard Class glider designed by Schempp-Hirth. It was produced in Germany between 1984 and 1995 but has continued in production in the Czech Republic. It replaced the Standard Cirrus. It was designed by Klaus Holighaus.
The Schempp-Hirth Ventus-2 is a sailplane produced by Schempp-Hirth since 1994. It replaced the highly successful Schempp-Hirth Ventus.
The Schempp-Hirth Mini Nimbus is a 15 Metre-class glider designed and built by Schempp-Hirth GmbH in the late 1970s.
The Schempp-Hirth Nimbus-2 is an Open Class glider built by Schempp-Hirth during the 1970s. The Nimbus-2 first flew in April 1971 and a total of over 240 examples of all subtypes have been built until the beginning of the 1980s. It replaced the Schempp-Hirth Cirrus.
The Rolladen-Schneider LS9 is an 18 metre single-seat motor glider launched in 2000 by Rolladen-Schneider. Production ended after just 10 gliders were built, when Rolladen-Schneider went into receivership.
The ASW 28 is a Standard Class glider with a fifteen-metre span built of modern fibre reinforced composites. The manufacturer of the ASW-28 is Alexander Schleicher GmbH & Co. The 'W' indicates this is a design of the influential and prolific German designer Gerhard Waibel. Serial production started in 2000.
The Politechnika Warszawska PW-6U is a Polish two-seat training sailplane designed at the Warsaw University of Technology for basic flight instruction and transition training to the PW-5 single-seater. It was manufactured at PZL Świdnik from 2000 and at ZS Jezow from 2007.
The ASW 24 is a modern single-seat high-performance composite Standard Class sailplane. It is manufactured in Germany by Alexander Schleicher GmbH & Co.
The SZD-45 Ogar (Hound) is a T-tailed cantilever high-wing monoplane of wooden, aluminium and fibreglass construction designed and manufactured in Poland.
The Glaser-Dirks DG-500, and later the DG-505, is a two-seat glider of glass-reinforced plastic and carbon fiber reinforced plastic construction, manufactured in the DG Flugzeugbau GmbH in Bruchsal, Germany. It first flew in 1987.
The Stemme S10 is a self-launching sailplane produced by Stemme AG in Strausberg (Germany) since the 1980s. The engine is mounted amidships and it features an unusual folding propeller which is stowed inside the aircraft's nose-cone when the engine is not in use.
The ICA IS-28 is a two-seat sailplane produced in Romania in the 1970s. An all-metal aircraft of conventional design with a T-tail, it was originally produced with 15-metre wings, but in 1973, production shifted to the IS-28B with 17-metre wings and numerous aerodynamic refinements. These included a smaller tail with decreased dihedral, decreased dihedral on the wings, and redesigned fuselage contours. This version first flew on 26 April 1973 and was subsequently produced in versions with flaps (IS-28B2) and without (IS-28B1). Around 100 had been built by the early 1980s, with a substantial number sold for export. On April 7, 1979, Tom Knauff and R. Tawse set a world record with the IS-28 B2 glider, covering a distance of 829 kilometres on a predetermined out-and-return course from the Ridge Soaring Gliderport in Julian, Pennsylvania.
The Scheibe Bergfalke is a German glider designed by Egon Scheibe as a post-World War II development of the Akaflieg München Mü13 produced before and during the war.
The Radab Windex is a family of Swedish high-wing, single-seat aerobatic gliders and motor gliders that was designed by Sven Olof Ridder and produced initially by Radab and later by WindexAir AB as a kit for amateur construction.
The Technoflug Piccolo is a German high-wing, T-tailed, single-seat motor glider that was designed and produced by Technoflug of Schramberg. It first flew in 1980.
The Binder EB28 is a German two-seat, open-class self-launching powered sailplane designed and built by Binder Motorenbau. It first flew in 1986.
The Hirth Hi 20 MoSe was a German motor glider designed in the late 1930s. Based on the Göppingen Gö 4 side-by-side seat training glider, it had a foldaway propeller, column-mounted above the fuselage and shaft-driven by a small internal piston engine.
The Blessing Rebell was a one/two seat motorglider designed for amateur construction in Germany. Only one was built, flying for the first time in 1973 in a pusher configuration. It was later modified and flew in 1980 as a tractor aircraft.
The Kortenbach & Rauh Kora 1 was an unusual twin boom, pusher configuration motor glider, designed and built in Germany in the 1970s and intended as a training aircraft.
The ASG 32 is a Two Seater Class glider manufactured by Alexander Schleicher. The prototype had its maiden flight in Poppenhausen on 31 May 2014. Deliveries began in 2015.
