 | This article needs additional citations for verification .(May 2009) |
| Discus | |
|---|---|
 | |
| General information | |
| Type | Standard-class sailplane |
| Manufacturer | Schempp-Hirth |
| Designer | |
| Number built | >850 |
| History | |
| First flight | 1984 |
The Schempp-Hirth Discus is a Standard Class glider designed by Schempp-Hirth. It was produced in Germany between 1984 and 1995 but has continued in production in the Czech Republic. It replaced the Standard Cirrus. It was designed by Klaus Holighaus.
The Discus was the first production sailplane to have a distinctive swept-back leading edge. This is now common in contemporary sailplanes.
Studies had long shown that the ideal wing for minimizing induced drag should be an elliptic planform. To keep production costs down, a triple-trapezoidal approximation of this shape was adopted for the Discus. The wing section was also new. Winglets were only available towards the end of the production run, though many have been retro-fitted. The fuselage and tail were adapted from the Schempp-Hirth Ventus. A version with a narrow fuselage is called the Discus 'a' and the wider fuselage version is called the 'b'. The fuselage is made of glass-reinforced plastic around a steel tube frame. The wings and tail surfaces are also fiberglass with the exception of the main wing spar, which is made of carbon fiber. There is a 6.5 L (1.7 US gal; 1.4 imp gal) water ballast tank in the fin for trimming purposes when the main wing mounted ballast tanks are in use (184 L combined) for a maximum wing-loading of 50 kg/m2 (10 lb/sq ft)
The Discus dominated standard class sailplane racing throughout the 1980s, winning six World Gliding Championships in a row from 1985 to 1995.
The best measured glide ratio is 42.5:1. Though it is considered a high performance sailplane, its handling is well within the capabilities of inexperienced pilots. With no bad manners, powerful airbrakes and a low landing speed, the Discus is popular with clubs. Discuses are easy gliders to assemble, having light wings, automatic control hookups and a single pin securing the wings.
Over 850 Discuses had been built by 2004 and it remains in production today despite the introduction of its successor, the Schempp-Hirth Discus-2. About 12 per year are built under license by Schempp-Hirth Vyroba in the Czech Republic as the Discus CS. Some models are fitted with small sustaining engines (turbos) and are designated Discus T.
Data fromJane's All the World's Aircraft 1988-89 [2]
General characteristics
Performance
Aircraft of comparable role, configuration, and era
Related lists
The Schempp-Hirth Discus-2 is a Standard Class sailplane produced by Schempp-Hirth since 1998. It replaced the highly successful Schempp-Hirth Discus.
The Schempp-Hirth Ventus is a sailplane produced during 1980–1994 by Schempp-Hirth, a German sailplane manufacturer. It was designed by Klaus Holighaus and replaced the Schempp-Hirth Mini-Nimbus. Schempp-Hirth manufactured 613 Ventus sailplanes.
The Schempp-Hirth Ventus-2 is a sailplane produced by Schempp-Hirth since 1994. It replaced the highly successful Schempp-Hirth Ventus.
The Rolladen-Schneider LS4 is a Standard Class single seat glider manufactured by Rolladen-Schneider Flugzeugbau GmbH between 1980 and 2003.
The Schempp-Hirth Mini Nimbus is a 15 Metre-class glider designed and built by Schempp-Hirth GmbH in the late 1970s.
The Rolladen-Schneider LS1 is a Standard Class single-seat glider manufactured in Germany by Rolladen-Schneider from 1968 to 1977.
The Schempp-Hirth Janus is a high performance two-seat glider that was built by Schempp-Hirth GmbH. It was the first high-performance two-seater.
The Standard Cirrus is a Standard-class glider built in Germany by Schempp-Hirth. The Standard Cirrus was produced between 1969 and 1985, when it was replaced by the Discus. Over 800 examples were built, making it one of the most successful early fibreglass glider designs.
The Schempp-Hirth HS-3 Nimbus was a prototype glider built by Klaus Holighaus.
The Schempp-Hirth Nimbus-2 is an Open Class glider built by Schempp-Hirth during the 1970s. The Nimbus-2 first flew in April 1971 and a total of over 240 examples of all subtypes have been built until the beginning of the 1980s. It replaced the Schempp-Hirth Cirrus.
The Schempp-Hirth Nimbus 3 is a glider built by Schempp-Hirth.
The Glaser-Dirks DG-300 is a Standard Class single-seat high-performance glider built from glass-reinforced plastic. The DG-300 was designed by Wilhelm Dirks and manufactured by Glaser-Dirks Flugzeugbau's Slovenian partner company Elan (company). A total of 511 of all versions were built since production started in 1983. Representative contemporary types from competing manufacturers are the Rolladen-Schneider LS4 and the Schempp-Hirth Discus.
The ASW 19 is a single-seat glider built by Alexander Schleicher GmbH & Co, first flying in 1975. It was originally designed as a Standard Class glider, but now mainly competes in the Club Class. The ASW 19 is known for its pleasant handling and some clubs use it as a training glider. It was succeeded by the all-new Schleicher ASW 24.
The Glaser-Dirks DG-500, and later the DG-505, is a two-seat glider of glass-reinforced plastic and carbon fiber reinforced plastic construction, manufactured in the DG Flugzeugbau GmbH in Bruchsal, Germany. It first flew in 1987.
The VSO 10 Vosa is a Standard and Club-Class glider designed and manufactured in the Czechoslovak Republic from December 1978 as a replacement for the VT-116 Orlik II.
The SZD-59 Acro is a single-seat glass composite glider for aerobatics and cross-country flying by PZL Allstar of Bielsko-Biała, Poland.
The Standard Austria was a single-seat aerobatic glider that was originally designed and built in Austria from 1959 but production was moved in 1962 to Schempp-Hirth in Germany.
The Schempp-Hirth SHK Open Class glider was developed in Germany by Schempp-Hirth. It was based on the 1964 version of the Standard Austria, known as the SH. The Austria was originally a single-seat aerobatic glider that had been designed and built in Austria from 1959 but production was moved in 1962 to the Schempp-Hirth factory in Germany.
The SZD-48 Jantar Standard 2 is a Standard Class glider that was designed and produced in Poland starting in 1977.
The Schempp-Hirth Ventus-3 is a sailplane produced by Schempp-Hirth. It replaces the highly successful Schempp-Hirth Ventus-2.
