SZD-55 | |
---|---|
General information | |
Type | Standard-class sailplane |
National origin | Poland |
Manufacturer | PZL Bielsko |
Designer | mgr inż. Tadeusz Łabuć |
Status | in production |
Number built | ~110 |
History | |
Introduction date | 1988 |
First flight | 15 August 1988 |
Developed from | SZD 48M "Bravo" |
The PZL Bielsko SZD-55 Nexus is a Standard Class sailplane produced by PZL Bielsko since 1988. It was built in direct competition with the Schempp-Hirth Discus. The SZD-55 is still in production with approximately 110 built.
The SZD-55 is built of fiberglass and has an elliptical wing. It has top surface Schempp-Hirth type airbrakes. The glider is reported to have pleasant handling [1] and to be easy to assemble, with automatic control hookups. With an empty weight of about 215 kg, it is the lightest of the current standard class gliders and it's known for its excellent climbing and thermalling characteristics. [2] The SZD-55 has a cambered wing-section and performs well at lower speeds, yet when full with water ballast (it can take up to 200 liters) it is also suitable for higher cruising speeds.
The main designer of the SZD-55 was Tadeusz Łabuć. Since the mid-eighties, the best glider in the standard class was undoubtedly the German standard Discus, whose excellent performance was attributed to its unusual triple trapeze wing shape. So it was the logical step to adopt a similar idea for use as the outline of the new construction: the elliptical contour of the wing leading edge. In 1987 construction of the two prototypes started, factory numbers X-144 (SP-P501) and X-145 (SP-P502). They first flew on 15.08.1988 and on 03.01.1989 piloted by January Roman.
Despite enormous difficulties in obtaining advanced materials (carbon fabric, kevlar) which meant that the glider had to be built with glass-epoxy laminates (already a relatively old technology at the time) the manufacturer managed to create a glider with an unladen weight of just over 200 kg. This meant that the PZL Bielsko factory constructed a glider that was lighter than the ones constructed using modern materials(carbon fiber and Kevlar), thanks to innovative construction techniques. [3] This technology was further improved during the designing and building of the SZD-56 Diana.
Data from SZD Allstar [4]
General characteristics
Performance
Related lists
The Schempp-Hirth Discus is a Standard Class glider designed by Schempp-Hirth. It was produced in Germany between 1984 and 1995 but has continued in production in the Czech Republic. It replaced the Standard Cirrus. It was designed by Klaus Holighaus.
The ASK 13 is a two-seater glider that was built by German sailplane manufacturer Alexander Schleicher Gmbh & Co. It was and still is widely used for basic training of glider pilots.
The ASW 24 is a modern single-seat high-performance composite Standard Class sailplane. It is manufactured in Germany by Alexander Schleicher GmbH & Co.
The ASW 19 is a single-seat glider built by Alexander Schleicher GmbH & Co, first flying in 1975. It was originally designed as a Standard Class glider, but now mainly competes in the Club Class. The ASW 19 is known for its pleasant handling and some clubs use it as a training glider. It was succeeded by the all-new Schleicher ASW 24.
The G102 Astir is a single-seat glassfibre Club Class sailplane, designed by Burkhart Grob and built by Grob Aircraft. It was the first Grob-designed sailplane, with the first flight in December 1974. Grob had previously built the Schempp-Hirth Standard Cirrus under licence.
The SZD-56 Diana is a 15 metre Class glider originally designed by Bogumił Bereś at PZL-Bielsko. However, PZL Bielsko went bankrupt before it could be put into serial production.
The SZD-59 Acro is a single-seat glass composite glider for aerobatics and cross-country flying by PZL Allstar of Bielsko-Biała, Poland.
The SZD-8 Jaskółka was a single-seat glider aircraft that was designed and built in Poland at Szybowcowy Zakład Doświadczalny in Bielsko-Biała from 1951.
The SZD-11 Albatros was a single-seat glider aircraft that was designed and built in Poland at Szybowcowy Zakład Doświadczalny - Glider Experimental Works in Bielsko-Biała in 1954. Only one prototype was completed and flown.
The SZD-12 Mucha 100 was a single-seat glider aircraft that was designed and built in Poland from 1953.
The SZD-14X Jaskółka M was a single-seat glider designed and built in Poland at Szybowcowy Zakład Doświadczalny - Glider Experimental Works in Bielsko-Biała in 1954. This was an experimental prototype, and only one unit was constructed.
The SZD-17X Jaskółka L was a single-seat high-performance competition glider designed and built in Poland at Szybowcowy Zakład Doświadczalny in Bielsko-Biała in 1955.
The SZD-22 Mucha Standard was a single-seat aerobatic glider designed and built in Poland from 1957.
The Standard Austria was a single-seat aerobatic glider that was originally designed and built in Austria from 1959 but production was moved in 1962 to Schempp-Hirth in Germany.
The Schempp-Hirth SHK Open Class glider was developed in Germany by Schempp-Hirth. It was based on the 1964 version of the Standard Austria, known as the SH. The Austria was originally a single-seat aerobatic glider that had been designed and built in Austria from 1959 but production was moved in 1962 to the Schempp-Hirth factory in Germany.
The SZD-41 Jantar Standard was a Standard Class glider designed and produced in Poland from 1973.
The SZD-48 Jantar Standard 2 is a Standard Class glider that was designed and produced in Poland starting in 1977.
The PZL Bielsko SZD-52 is a Polish single-seat standard class sailplane produced by PZL Bielsko. It is a cantilever high-wing monoplane with a T-tail and has a retractable main landing gear and a fixed tailwheel. The wings have integral water ballast tanks.
The PZL Bielsko SZD-51 Junior is a Polish single-seat training and club sailplane.
The Allstar SZD-54 Perkoz is a two-seater, glider for training, aerobatics, cross country flight and cloud flying from the Polish manufacturer Allstar PZL Glider. The sailplane has exchangeable wing tips for either 17.5 or 20 metres and is manufactured primarily from glass fibre reinforced plastic (GFRP). Without wing extension, it is certified for unlimited aerobatic manoeuvres. For glider training, the short wingspan is supplemented with winglets. As a cross-country glider with a 20 metres wing and winglets, the Perkoz has a glider index of 102. The SZD-54-2 Perkoz is the successor of the widely used SZD-50-3 Puchacz trainer, which is part of the SZD family of aircraft.