| CSS-12 | |
|---|---|
 | |
| Role | Airliner |
| National origin | Poland |
| Manufacturer | Centralne Studium Samolotów (C.S.S.) |
| First flight | 22 November 1950 |
| Number built | 1 |
The CSS-12 was a prototype Polish twin-engined feederliner of the 1950s. A single example was built and flown in 1950, but no production followed.
The German invasion of Poland at the start of the Second World War resulted in the destruction of Poland's aviation industry, and following the end of the war the Polish government decided to re-establish a national aviation industry. Two design bureaus were set up to design and develop prototypes, Lotnicze Warsztaty Doświadczalne (LWD) (Aircraft Experimental Workshops) at Łódź and the Centralne Studium Samolotów (C.S.S.) (Central Aircraft Study) based at Warsaw, with production to be carried out at a series of State Aircraft Factories (PZL). [1] [2] The C.S.S., led by Franciszek Misztal, who worked as a designer in the pre-war PZL, was tasked with the design of three types, the CSS-10, a single-engined primary trainer, an aerobatic trainer, the CSS-11 and a twin-engined feederliner, which was designated CSS-12. [2] [3]
Work on the CSS-12 began in 1948, with the prototype making its maiden flight on 22 November 1950. [3] It was a twin-engined low-wing cantilever monoplane of all-metal construction, [4] the first all-metal aircraft to be built in Poland following the end of the Second World War. [5] The oval section fuselage accommodated seats for ten passengers in two rows of five, with the two pilots sitting in an enclosed flight deck forward of the passenger cabin, while a cloakroom and baggage compartment aft of the cabin. The aircraft's wings featured a mixture of smooth and corrugated duralumin skinning, with the corrugated sections covered in fabric to reduce drag. Full-span hydraulically operated trailing-edge flaps were fitted, while engine exhaust gas was used to de-ice the wings' leading edge. The aircraft was fitted with a retractable nosewheel undercarriage. Two 440 hp (330 kW) Argus As 411 engines, built in Germany during the war, drove two-bladed constant speed propellers. [3] [4]
At the end of 1950, the Polish aviation industry was re-organised, with large orders being placed for license-production of Soviet Mikoyan–Gurevich MiG-15 jet fighters. As part of this reorganisation, LWD and the CSS were disbanded, and work on the CSS-12 was suspended. [6] In 1955 flight testing of the CSS-12 resumed. [6] Although testing was successful, with the aircraft setting an international class altitude record of 6,600 metres (21,653 ft) while carrying a payload of 1,020 kilograms (2,240 lb) on 27 December 1957, no production followed, as the CSS-12 did not meet the requirements of Poland's national airline LOT and no suitable replacements for its out-of production German engines were available. [5] [7] Instead, the CSS-12 formed the basis of the larger four-engined PZL MD-12 airliner which made its first flight in 1959. [6] [8]
Data from Jane's All The World's Aircraft 1956–57 [9]
General characteristics
Performance
The PZL.23 Karaś was a Polish light bomber and reconnaissance aircraft designed in the early 1930s by PZL in Warsaw.
The PZL.37 Łoś (moose) was a Polish twin-engined medium bomber designed and manufactured by national aircraft company PZL. It is also known as "PZL P-37" or "PZL P.37", but the letter "P" was generally reserved for fighters of Zygmunt Puławski's design.
The PZL TS-11 Iskra is a Polish jet trainer, developed and manufactured by aircraft company PZL-Mielec. It has been used by the air forces of Poland and India. It is notable as being the first domestically-developed jet aircraft to be produced by Poland, its service for over 50 years as the principal training aircraft of the Polish Air Force, and as the oldest jet-propelled aircraft still in service in Poland.
The LWD/WSK Junak was a Polish trainer aircraft, used from 1952 to 1961 by the Polish Air Force and until 1972 by Polish civilian operators. It was designed by the LWD bureau and produced by the WSK Warszawa-Okęcie factory.
The PZL P.24 was a Polish fighter aircraft, designed during the mid-1930s in the PZL factory in Warsaw. It was developed as a dedicated export version of the PZL P.11, a gull wing all-metal fighter designed by Polish aeronautical engineer Zygmunt Puławski.
The PZL.50 Jastrząb (hawk) was a Polish pre-war fighter aircraft design by Wsiewołod Jakimiuk of the PZL works. The single-seat low-wing monoplane was to serve as a multi-purpose fighter and escort to replace all other fighters in the Polish Air Force. Designed after 1936, its prototype first flew in February 1939. A further two prototypes were under construction by the time of the Invasion of Poland, but the fighter never entered mass production.
The PWS-33 Wyżeł was a Polish twin-engined military trainer aircraft from a period before World War II constructed by Podlaska Wytwórnia Samolotów or PWS. Although destined for production it got no further than the prototypes before Poland was invaded.
The PWS-10 was a Polish fighter aircraft, constructed in the PWS. It was the first Polish-designed fighter to enter serial production.
PZL M-4 Tarpan was a Polish trainer and sports aircraft prototype of the 1960s, designed in WSK-Mielec.
The PZL P.6 was a Polish fighter, designed by the engineer Zygmunt Puławski, manufactured by PZL state-owned factory. It remained a prototype.
The PZL-5 was a Polish two-seat touring and sports aircraft of 1930 constructed and produced by the PZL.
The PZL S-4 Kania 2 was a Polish trainer and glider towing aircraft of the 1950s, not built in series. The first prototype was designated S-3 Kania. There is also a helicopter named PZL Kania.
The PWS-18 was a Polish trainer aircraft, used from 1937 to 1939 by the Polish Air Force, a modified licence variant of the British Avro Tutor.
The MD-12 was a Polish four-engined short-range passenger and civil utility aircraft of the 1960s, which remained in a prototype stage. The PZL brand is conventional, since it did not enter production, and was referred to under its project designation only.
PZL.12 (PZL-H) was a prototype of a Polish amphibious flying boat designed and built in 1931 by Zygmunt Puławski, a pioneering Polish designer. He was killed in a crash involving this design.
The PZL Ł.2 was the Polish Army cooperation and liaison aircraft, built in 1929 in the Polskie Zakłady Lotnicze (PZL) in Warsaw. Only a small series of 31 aircraft, including prototype, were made, and used by the Polish Air Force in the 1930s. The aircraft was known in Poland for accomplishing of a long-distance tour around Africa in 1931.
The PZL P.1 was a Polish fighter, designed by the engineer Zygmunt Puławski, manufactured by the PZL state-owned factory. It remained a prototype, but it was the first of the Polish PZL gull wing fighter series, leading to the PZL P.7, PZL P.11 and PZL P.24.
The PZL-102 Kos (blackbird) is a Polish two-seat touring and training monoplane designed and built by PZL.
The LWD Żuraw was a Polish utility and liaison aircraft prototype of 1951, high-wing monoplane with single engine, that did not enter production. The name means crane.
The PWS-4 was a prototype Polish sports aircraft, developed in 1928 by Podlaska Wytwórnia Samolotów.