 | This article needs additional citations for verification .(December 2012) |
| SZD-49 Jantar K | |
|---|---|
| Role | Glider |
| National origin | Poland |
| Manufacturer | ZSLS Bielsko |
| Designer | Władysław Okarmus |
| First flight | 10 October 1978 |
| Status | prototype |
| Number built | 1 |
| Developed from | SZD-48 Jantar Standard 2/3 |
The SZD-49 Jantar K was a 15m Class glider designed and built in Poland in 1977. [1]
After the FAI Standard class rules had been created and then modified in the early 1970s the FAI decided to add a new 15m class, for gliders with a maximum span of 15m but no other restrictions other than airbrakes limiting the speed to Vne or less. Władysław Okarmus set about designing a new wing, with flaps, for use with the SZD-48-3 fuselage, the resulting offspring was named SZD-49 Jantar K. First flight of the prototype, (SP-2583, X-143), took place at Bielsko in October 1978. All was not well with the SZD-49 during the flight trials and further development was abandoned. The sole prototype was later used as a live teaching aid for advanced students and was successfully modified twice with some success by groups of students from Warsaw University of Technology.
Constructed almost entirely from glassfibre using epoxy resin, the SZD-49 had a welded steel tube centre-section truss to accept the loads from the wings, undercarriage and towing hook. A one-piece forward-opening canopy with integral glare-shield gave access to the cockpit for entry/egress and maintenance. The wings are fitted with full-span flaps with drooping ailerons as well as single-leaf airbrakes extending from top and bottom surfaces of the wing. Ailerons are driven through a patented linkage entirely enclosed inside the wing. [1]
A standard instrument fit and an oxygen system were provided by the manufacturer.
Data from [1]
General characteristics
Performance
Aircraft of comparable role, configuration, and era
The Rolladen-Schneider LS3 is a 15 metre single-seat glider produced by Rolladen-Schneider from 1976 to 1983.
The ASW 20 is an FAI 15 metre Class glider designed by Gerhard Waibel and built by Alexander Schleicher GmbH & Co. Its fuselage is nearly identical to that of the ASW 19, mated to newly designed flapped wings for the 15 metre Class. The prototype first flew in 1977. It proved to be a highly successful glider, winning several World Championships, and was still being flown at this level up to 1995. Developments along its production life included winglets, pneumatic turbulators, and wingtip extensions. It remained in production until 1990, when it was superseded by the ASW 27. 765 were built by Schleicher and a further 140 were made under license by Centrair in France.
The Schempp-Hirth Nimbus-2 is an Open Class glider built by Schempp-Hirth during the 1970s. The Nimbus-2 first flew in April 1971 and a total of over 240 examples of all subtypes have been built until the beginning of the 1980s. It replaced the Schempp-Hirth Cirrus.
The G102 Astir is a single-seat glassfibre Club Class sailplane, designed by Burkhart Grob and built by Grob Aircraft. It was the first Grob-designed sailplane, with the first flight in December 1974. Grob had previously built the Schempp-Hirth Standard Cirrus under licence.
The Glasflügel H-301 Libelle is an early composite single-seat sailplane produced by Glasflügel from 1964 to 1969. The H-301 had camber-changing wing flaps so was required to compete in the Open Class because the Standard Class excluded wing flaps. It was often known as the Open Class Libelle.
The Schleicher ASW 17 is a single-seat Open Class sailplane that was built by the German manufacturer Alexander Schleicher GmbH & Co and first flew in 1971. It replaced the ASW 12, and was replaced in 1981 by the ASW 22.
The ICA IS-32 is an open class high-performance metal two-seat sailplane produced in Romania in the 1970s. A refinement of the IS-28B, it shared most of that aircraft's fuselage, mated to new wings and empennage. This new wing had a span of 20 metres, featuring interconnected ailerons and flaps, Schempp-Hirth-type airbrakes. It had no provision for water ballast. The monowheel undercarriage differed from the IS-28 in being fully retractable.
The SZD-59 Acro is a single-seat glass composite glider for aerobatics and cross-country flying by PZL Allstar of Bielsko-Biała, Poland.
The SZD-8 Jaskółka was a single-seat glider aircraft that was designed and built in Poland at Szybowcowy Zakład Doświadczalny in Bielsko-Biała from 1951.
The SZD-6x Nietoperz was a single-seat tail-less experimental glider aircraft that was designed and built in Poland at Szybowcowy Zakład Doświadczalny in Bielsko-Biała in 1951. Only one example was constructed.
The SZD-12 Mucha 100 was a single-seat glider aircraft that was designed and built in Poland from 1953.
The SZD-22 Mucha Standard was a single-seat aerobatic glider designed and built in Poland from 1957.
The SZD-24 Foka (Seal) was a single-seat high-performance aerobatic glider designed and built in Poland in 1960.
The SZD-38 Jantar 1 (Amber) is a glider designed and produced in Poland from 1971.
The SZD-41 Jantar Standard was a Standard Class glider designed and produced in Poland from 1973.
The SZD-48 Jantar Standard 2 is a Standard Class glider that was designed and produced in Poland starting in 1977.
The SZD-40x Halny is an experimental two-seat glider designed and built in Poland in 1971.
The FFA Diamant is a family of Swiss high-wing, T-tailed, single-seat, FAI Standard Class and FAI Open Class gliders that was designed by engineering students under supervision of Professor Rauscher at the ETH Zurich and manufactured by Flug- und Fahrzeugwerke Altenrhein AG (FFA) of Altenrhein, Switzerland.
The Akaflieg Braunschweig SB-8 is an experimental, single-seat, high performance glider built in Germany in the 1960s, constructed largely from glass fibre skin over built up balsa wood structure. Two were built; the second of which was later fitted with a high aspect ratio (30:1) wing, becoming the Akaflieg Braunschweig SB-9 Stratus.
The SZD-42 Jantar 2 is a single seat Open Class competition glider, designed and produced in Poland in the 1970s. It features a span of over 20 m (66 ft) and elastic, camber changing flaps. It was placed second, third and seventh at the 1976 World Gliding Championships. Over one hundred were built and more than ninety remain registered.
