ASW 20 | |
---|---|
General information | |
Type | 15 metre or Sports Class sailplane |
National origin | Germany |
Manufacturer | Schleicher Centrair (under licence) |
Designer | |
Number built | 905 |
History | |
Introduction date | 1977 |
First flight | 1977 |
The ASW 20 is an FAI 15 metre Class glider designed by Gerhard Waibel and built by Alexander Schleicher GmbH & Co. Its fuselage is nearly identical to that of the ASW 19, mated to newly designed flapped wings for the 15 metre Class. The prototype first flew in 1977. It proved to be a highly successful glider, winning several World Championships, and was still being flown at this level up to 1995. Developments along its production life included winglets, pneumatic turbulators, and wingtip extensions. It remained in production until 1990, when it was superseded by the ASW 27. 765 were built by Schleicher and a further 140 were made under license by Centrair in France.
The ASW 20 was successful in competition, winning numerous world and national championships. Dick Johnson reported that the ASW 20 was the first 15 m glider to demonstrate a measured L/D in excess of 40:1. Roy McMaster, Karl Striedieck and John Seymour won jointly, with others, the world triangle distance record of 1,435 km (892 mi) in 1994 in an ASW 20B. ASW 20s won second and third places in the 15 metre Class at the 1983 World Championships at Hobbs, New Mexico.
The ASW 20 is constructed from glass-reinforced plastic. It features trailing edge flaps which interconnect with the ailerons and allow the entire trailing edge to operate as a flap between -9 and +5 degrees. The flaps also act as ailerons, but deflect only half of the aileron amount. Schempp-Hirth type airbrakes are provided on the upper wing surface.
The B model (introduced in 1983) differs from the A and C model in that it uses a reinforced wing spar, which provides an increased water ballast capacity at the expense of the flexible wing. The B and C model include several enhancements over the original A model, including a lifting panel, hydraulic disc brake, and automatic elevator hookup. The B and C wings also incorporate a pneumatic turbulator system, which draws high pressure air from pitot inlets on the wing and injects it through approximately 860 pinholes into the boundary layer to control underwing airflow separation.
ASW 20s that include a L designation may be fitted with a 1.59 m wingtip extension. The F designation was assigned to A variants produced in France by Centrair. Centrair also produced an FL variant equivalent to the German ASW20L; most of these are only permitted to fly without the wingtip extensions due to a deficiency in the wing spar construction.
At least three different winglet designs have been produced for the ASW 20, including a NASA winglet fitted to the Centrair gliders (FP), a design by Peter Masak, and a second generation winglet designed by Prof. Mark D. Maughmer of Penn State University (USA).
The ASW-20 is known as a very pleasant handling glider in most respects. The wing structure composite layup was designed to twist slightly as the wings flexed upward, resulting in the ability to "store" some of the energy from atmospheric gusts, and then release that energy with a very slight forward thrust force as the wings flexed back downward to their normal position. This concept is known as the Katzmayr Effect, and somewhat mimics a bird's ability to use a flapping motion to propel itself forward in flight. This unique wing twisting movement gave the ASW-20 an ability to make very small but consistent performance gains (or reduced losses) in turbulent and gusty thermal conditions compared to other competition level sailplanes.
The landing flaps (55° in early models, 38° in later models), in conjunction with very effective airbrakes, allow the pilot to make exceptionally steep approaches at slow speeds, permitting very short landings when required. Second generation winglets further improved the handling and reduced drag at low to mid speeds. Thermal performance is comparable to gliders of more modern eras. [1] These characteristics have made the ASW-20 a much beloved and desirable aircraft, even after it was no longer competitive in racing. One very common modification was the insertion of an intermediate flap setting detent (between zero and +1 position) which mitigated or softened any "tip-stall" and associated risk of spinning while thermaling in tight, gusty thermals. The flexible wing of the A and C models is particularly favored for ridge running, where it absorbs some of the tremendous turbulence found at ridgetop.
Data fromJane's All the World's Aircraft 1988–89 [3]
General characteristics
Performance
Related lists
The Schempp-Hirth Discus is a Standard Class glider designed by Schempp-Hirth. It was produced in Germany between 1984 and 1995 but has continued in production in the Czech Republic. It replaced the Standard Cirrus. It was designed by Klaus Holighaus.
The Schempp-Hirth Ventus is a sailplane produced during 1980–1994 by Schempp-Hirth, a German sailplane manufacturer. It was designed by Klaus Holighaus and replaced the Schempp-Hirth Mini-Nimbus. Schempp-Hirth manufactured 613 Ventus sailplanes.
The Glaser-Dirks DG-200 is a 15 metre class glider built by Glaser-Dirks, now DG Aviation GmbH
The Rolladen-Schneider LS7 is a high-performance Standard Class single-seat sailplane produced by Rolladen-Schneider Flugzeugbau GmbH from 1988 to 1993.
The Rolladen-Schneider LS4 is a Standard Class single seat glider manufactured by Rolladen-Schneider Flugzeugbau GmbH between 1980 and 2003.
The Schempp-Hirth Mini Nimbus is a 15 Metre-class glider designed and built by Schempp-Hirth GmbH in the late 1970s.
The Standard Cirrus is a Standard-class glider built in Germany by Schempp-Hirth. The Standard Cirrus was produced between 1969 and 1985, when it was replaced by the Discus. Over 800 examples were built, making it one of the most successful early fibreglass glider designs.
The Schempp-Hirth Nimbus 3 is a glider built by Schempp-Hirth.
The ASW 28 is a Standard Class glider with a fifteen-metre span built of modern fibre reinforced composites. The manufacturer of the ASW-28 is Alexander Schleicher GmbH & Co. The 'W' indicates this is a design of the influential and prolific German designer Gerhard Waibel. Serial production started in 2000.
The Schleicher ASW 15 is a single-seat sailplane designed in 1968 by Gerhard Waibel and manufactured by Alexander Schleicher GmbH & Co. The ASW 15 has shoulder-mounted wings and an all-flying tailplane, with its single tow-release placement a compromise between winching and aerotowing. The later ASW 15B had several improvements, including a tow-release placed on the plane of symmetry, an 11 cm taller rudder, a slightly larger main wheel, and the provision of a 90-litre water ballast system.
The ASW 27 is a 15 metre Class glider built of modern fibre reinforced composites, which first flew in 1995 and was certified in 1997. The manufacturer of the ASW 27 is Alexander Schleicher GmbH & Co. The "W" indicates this is a design of the influential and prolific German designer Gerhard Waibel.
The Centrair C101 Pegase is a Standard Class single-seat glider manufactured by Centrair starting in 1981. The design uses the ASW 19 fuselage with a new wing designed by ONERA, giving better performance than the German original.
The ASW 24 is a modern single-seat high-performance composite Standard Class sailplane. It is manufactured in Germany by Alexander Schleicher GmbH & Co.
The ASW 19 is a single-seat glider built by Alexander Schleicher GmbH & Co, first flying in 1975. It was originally designed as a Standard Class glider, but now mainly competes in the Club Class. The ASW 19 is known for its pleasant handling and some clubs use it as a training glider. It was succeeded by the all-new Schleicher ASW 24.
The ASW 22 is an Open Class glider built by Alexander Schleicher GmbH & Co which first flew in 1981. The 'W' in the designation indicates that this is a product of the German designer Gerhard Waibel. An ASW 22 broke the world 750 km triangle speed record in 1985 and ASW 22s have won first place in six World Gliding Championships.
The ASH 26 is an 18 metre Class glider, built of modern fibre reinforced composites. It first flew in 1993. It is manufactured by Alexander Schleicher GmbH & Co. The 'H' indicates this is a design of Martin Heide.
The Glasflügel H-301 Libelle is an early composite single-seat sailplane produced by Glasflügel from 1964 to 1969. The H-301 had camber-changing wing flaps so was required to compete in the Open Class because the Standard Class excluded wing flaps. It was often known as the Open Class Libelle.
The Schleicher ASG 29 is a German sailplane manufactured by Alexander Schleicher GmbH & Co since 2006. It can be flown as an 18 metre Class glider or as a 15 metre Class glider. The 'G' indicates a design by Michael Greiner. It is a refinement of the popular ASW-27 and for certification purposes it is designated the ASW-27-18. It has been replaced by the Schleicher AS 33.
The Schleicher ASW 17 is a single-seat Open Class sailplane that was built by the German manufacturer Alexander Schleicher GmbH & Co and first flew in 1971. It replaced the ASW 12, and was replaced in 1981 by the ASW 22.
The Akaflieg Braunschweig SB-11 is an experimental, single seat, variable geometry sailplane designed by aeronautical students in Germany. It won the 15 m span class at the World Gliding Championships of 1978 but its advances over the best, more conventional, opposition were not sufficient to lead to widespread imitation.
{{cite book}}
: |last2=
has generic name (help)CS1 maint: multiple names: authors list (link)