Schleicher ASW 28

Last updated
ASW 28
Asw28-18.jpg
ASW 28-18
Role Standard-class sailplane
National originGermany
Manufacturer Schleicher
Designer Gerhard Waibel
First flightca. 2000
Number built>144

The ASW 28 is a Standard Class glider with a fifteen-metre span built of modern fibre reinforced composites. The manufacturer of the ASW-28 is Alexander Schleicher GmbH & Co. The 'W' indicates this is a design of the influential and prolific German designer Gerhard Waibel. Serial production started in 2000.

Contents

Design and development

The ASW 28 is a single-seat shoulder-winged composite construction sailplane with a T-shaped horizontal tailplane and 15 metre wingspan. The upper wing surface has Schempp-Hirth airbrakes.

As all Standard Class sailplanes, the ASW-28 does not have flaps or other lift-enhancing devices. It has tall winglets, a retractable undercarriage and a water ballast system. The structure is a complex composite of carbon, aramid and polyethylene fibre reinforced plastic. This permits a light structure with the strength to carry large amounts of water ballast, thus permitting the widest possible range of wing loadings for weak and strong soaring weather.

The ASW-28 supersedes the ASW 24 in the manufacturer's production line. It has – like its competitors Rolladen-Schneider LS8 and Schempp-Hirth Discus-2 – a version with wing extensions for the increasingly popular 18 metre Class, the ASW 28-18. The sustainer (non-self-launching) variant of the 18 metre version is the ASW 28-18 E. The sustainer uses a SOLO 2350 18 hp two-stroke engine.

Variants

ASW 28
Production variant with 15 metre wingspan.
ASW 28-18
Production variant with either a 15 metre or 18 metre span, also optional engine installation.
ASW 28-18 E
Production variant with a 13.2 kW (18 hp) SOLO 2350 2-stroke sustainer engine.

Specifications (with 15 metre wings)

General characteristics

Performance

See also

Aircraft of comparable role, configuration, and era

Related lists

Related Research Articles

<span class="mw-page-title-main">Schempp-Hirth Discus</span> German single-seat glider, 1984

The Schempp-Hirth Discus is a Standard Class glider designed by Schempp-Hirth. It was produced in Germany between 1984 and 1995 but has continued in production in the Czech Republic. It replaced the Standard Cirrus. It was designed by Klaus Holighaus.

<span class="mw-page-title-main">Schempp-Hirth Discus-2</span> German single-seat glider, 1984

The Schempp-Hirth Discus-2 is a Standard Class sailplane produced by Schempp-Hirth since 1998. It replaced the highly successful Schempp-Hirth Discus.

Schempp-Hirth Ventus-2 German single-seat glider, 1994

The Schempp-Hirth Ventus-2 is a sailplane produced by Schempp-Hirth since 1994. It replaced the highly successful Schempp-Hirth Ventus.

<span class="mw-page-title-main">Glaser-Dirks DG-200</span> German single-seat glider, 1977

The Glaser-Dirks DG-200 is a 15 metre class glider built by Glaser-Dirks. It first flew in 1977. Wingtip extensions to 17 metres were offered in 1978. Later enhancements included a single-piece canopy, a carbon-fibre wing spar and a change in the wing profile. A total of 192 DG-200 were built.

<span class="mw-page-title-main">Rolladen-Schneider LS4</span> Single seat German glider 1980

The Rolladen-Schneider LS4 is a Standard Class single seat glider manufactured by Rolladen-Schneider Flugzeugbau GmbH between 1980 and 2003.

<span class="mw-page-title-main">Schempp-Hirth Mini-Nimbus</span> German single-seat glider, 1976

The Schempp-Hirth Mini Nimbus is a 15 Metre-class glider designed and built by Schempp-Hirth GmbH in the late 1970s.

Rolladen-Schneider LS1 Single seat German glider, 1968

The Rolladen-Schneider LS1 is a Standard Class single-seat glider manufactured in Germany by Rolladen-Schneider from 1968 to 1977.

<span class="mw-page-title-main">Schempp-Hirth Standard Cirrus</span> German single-seat glider, 1969

The Standard Cirrus is a German Standard-class glider built by Schempp-Hirth. The Standard Cirrus was produced between 1969 and 1985, when it was replaced by the Discus. Over 800 examples were built, making it one of the most successful early fibreglass glider designs.

Rolladen-Schneider LS8 Standard/18 metre class single-seat Geman glider, 1994

The Rolladen-Schneider LS8 is a Standard and 18 metre class single-seat glider developed by Rolladen-Schneider and in series production since 1995. Currently it is manufactured by DG Flugzeugbau.

Rolladen-Schneider LS9 Single seat German motor glider, 1994

The Rolladen-Schneider LS9 is an 18 metre single-seat motor glider launched in 2000 by Rolladen-Schneider. Production ended after just 10 gliders were built, when Rolladen-Schneider went into receivership.

<span class="mw-page-title-main">Schleicher ASW 15</span> German single-seat glider, 1968

The Schleicher ASW 15 is a single-seat sailplane designed in 1968 by Gerhard Waibel and manufactured by Alexander Schleicher GmbH & Co. The ASW 15 has shoulder-mounted wings and an all-flying tailplane, with its single tow-release placement a compromise between winching and aerotowing. The later ASW 15B had several improvements, including a tow-release placed on the plane of symmetry, an 11 cm taller rudder, a slightly larger main wheel, and the provision of a 90-litre water ballast system.

<span class="mw-page-title-main">Glaser-Dirks DG-300</span> German single-seat glider, 1983

The Glaser-Dirks DG-300 is a Standard Class single-seat high-performance glider built of glass-reinforced plastic. The DG-300 was designed by Wilhelm Dirks and manufactured by Glaser-Dirks Flugzeugbau's Slovenian partner company Elan (company). A total of 511 of all versions were built since production started in 1983. Representative contemporary types from competing manufacturers are the Rolladen-Schneider LS4 and the Schempp-Hirth Discus.

The Rolladen-Schneider LS10 is an 18 metre sailplane designed in Germany by Rolladen-Schneider. A prototype flew in 2003.

<span class="mw-page-title-main">Schleicher ASW 24</span> Single-seat German glider, 1987

The ASW 24 is a modern single-seat high-performance composite Standard Class sailplane. It is manufactured in Germany by Alexander Schleicher GmbH & Co.

<span class="mw-page-title-main">Schleicher ASW 19</span> German glider, 1975

The ASW 19 is a single-seat glider built by Alexander Schleicher GmbH & Co, first flying in 1975. It was originally designed as a Standard Class glider, but now mainly competes in the Club Class. The ASW 19 is known for its pleasant handling and some clubs use it as a training glider. It was succeeded by the all-new Schleicher ASW 24.

<span class="mw-page-title-main">Schleicher ASG 29</span> German sailplane, 2006

The Schleicher ASG 29 is a German sailplane manufactured by Alexander Schleicher GmbH & Co since 2006. It can be flown as an 18 metre Class glider or as a 15 metre Class glider. The 'G' indicates a design by Michael Greiner. It is a refinement of the popular ASW-27 and for certification purposes it is designated the ASW-27-18. It has been replaced by the Schleicher AS 33.

The Schleicher ASW 17 is a single-seat Open Class sailplane that was built by the German manufacturer Alexander Schleicher GmbH & Co and first flew in 1971. It replaced the ASW 12, and was replaced in 1981 by the ASW 22.

Schempp-Hirth Arcus German two-seat glider, 2009

The Schempp-Hirth Arcus is a flapped Two Seater Class glider in production by Schempp-Hirth. It first flew 7 April 2009. It is offered in addition to the Duo Discus which is an unflapped 20 metre two-seater, whose fuselage it shares. The wings have flaperons integrated along the whole span.

<span class="mw-page-title-main">SZD-41 Jantar Standard</span> Type of aircraft

The SZD-41 Jantar Standard was a Standard Class glider designed and produced in Poland from 1973.

The Schleicher AS 33 is a German glider manufactured by Alexander Schleicher. The prototype had its maiden flight from Huhnrain Airport, Poppenhausen near Frankfurt on 23 January 2020. The design can be flown in the 18 metre class or in the 15 metre class.

References