Abyssal channel

Last updated

Abyssal channels (also, deep-sea channels, underwater channels) are channels in Earth's sea floor. They are formed by fast-flowing floods of turbid water caused by avalanches near the channel's head, with the sediment carried by the water causing a build-up of the surrounding abyssal plains. Submarine channels and the turbidite systems which form them are responsible for the accumulation of most sandstone deposits found on continental slopes and have proven to be one of the most common types of hydrocarbon reservoirs found in these regions. [1]

Contents

Submarine channels and their flanking levees are commonly referred to as channel levee systems. [2] They are significant geomorphological features that may run for thousands of kilometres across the ocean floor. Often, they coalesce and overlap to form channel levee complexes which are the building blocks of many major submarine fans. [3] This makes them one of several geological processes responsible for the transport of coarse-grained sediment into deep water, as well as being a chief conduit for the transfer of carbon from the continental shelf to the deeper parts of the continental margins. [4] [5] [6] [7] [8]

They do, however, remain one of the least understood sedimentary processes. [3]

The effect of Earth's rotation causes more sediment to build up on one side of the channel than on the other. [9]

What constitutes a channel is not straight forward. Different terms are used on a per study basis, all of which have similar but not quite interchangeable definitions. There have been efforts to produce an up-to-date, holistic view, but even since then there has been a significant number of papers which take concepts even further. [10] [11]

There are numerous terms that are used to describe the features contained in this study, including geo-body, channel complex, channel storey, channel complex set, and confined channel complex system. [12] These cover single channels, a single channel and associated sediments or multiple channels grouped. Flood (2001) defines a channel-levee system as a single channel with a levee at each side. [13] These levees are formed by the overspilling and flow stripping of turbidity currents. These are most likely to occur during sea level lowstands. A collection of these channels and levees along with overbank sediments form a channel-levee complex.

They can be V or U in shape, have the presence or lack of depositional margins, highly sinuous or straight. [11]

Architecture and nomenclature

Ian Kane advocates the use of the terms internal levee and external levee to avoid confusion in the literature concerning the use of "inner" and "outer" levees. To help encourage this unification of phrases into a clearer architectural hierarchy, this study will use Kane's nomenclature. [3]

External levees are a dominantly depositional body forming a constructional wedge of sediment that thins perpendicularly away from a channel-belt. The external levee forms during the evolution of a genetically related channel-belt (or slope valley, channel fairway) by flows that partially spill out of their confinement. External levees can confine adjacent channel belts to form levee-confined systems. External levees may be much less sinuous than the levees of an individual channel-levee system as they do not follow one particular channel but may be the product of overspill from one or more channels or channel-levee systems meandering within the wider channel-belt. [14] [15] The levee crest is the highest point of the external levee, and runs parallel to the course of the channel-belt, separating the external levees into outer external levees and inner external levees.

Internal levees are constructional features fed by flows that partially spilled out of channelised confinement, but were largely unable to escape the confinement of the channel-belt. The flows which build internal levees may interact with the main confining surface, i.e., the external levees, and/or the channel-belt erosion surface, and are liable to erosion by the migration or avulsions of channel thalwegs, and the overbank passage of large flows not confined by the internal levees. As a consequence of lateral migration, internal levees may be better preserved on inner bends. [16] Internal levees form only when confinement has been established, through the construction of external levees and/or the degradation and entrenchment of the composite erosion surface of the channel-belt, or confined within canyons. [14] Internal levees may form distinct wedges of sediment where enough space is available; where space is limited, i.e., where overspill from underfit channels interacts with external levees or erosional confinement, overspill deposits may appear superficially similar to terrace deposits, which are widely identified in the subsurface. [17] [18]

Channel sinuosity and migration

Sinuosity in submarine channels is a feature regularly observed on seismic maps. It can vary between occasional low amplitude bends to highly sinuous, densely looping channels. Channel sinuosity results in significant migration lateral and affects continuity of facies associated with both channel sediments and surrounding deep water sediments. Although it is not always clear how these sinuosities evolve, they typically do not result from a random wandering. In most cases, the wandering and changes in sinuosity is as a result of external forces. As a result of this, PJeff Peakall advocates the avoidance of the term meandering to describe this sinuosity, a phrase used to describe similar sinuosity observed in terrestrial fluvial systems. [19]

There seems to be a potential consensus that truly sinuous channel can be defined as one that displays a minimum average sinuosity of between 1.2 [10] and 1.15. [20] [ improper synthesis? ] Difficulty with rigorous application of these values is that relatively straight channels may locally exceed them and some sinuous channels may display peak sinuosity values well in excess.

The sinuosity of submarine channels is a characteristic instantly recognizable as being shared with fluvial systems. In recent years there are increasingly mixed opinions in academic literature as to how far they are analogous to each other with some feeling that such notions of similarity should not hold. The best description is that the two are similar in some ways but more variable and complex in other. This applies to both the geometry of morphological features, the processes involved in forming them as well as the character of the deposits formed.[ citation needed ]

Mike Mayall provides the best summary that discusses the causes of sinuosity. Factors involve: flow dynamics such as flow density and flow velocity; and the depth of the current relative to topography; and topographic and morphological controls such; shape channel cross section, slope topography, erosive base at flow onset and the effects of both lateral stacking and lateral accretion. Compared to their terrestrial cousins, the scale of submarine systems observed in seismic sections, aerial photos and rock outcrops are in no way comparable. As expected with this significant difference in scale, the dynamics of turbid current flows within submarine channels are significantly different from fluvial systems. These differences in dynamics and scale are due to the much lower density contrast between the flow and the host fluid is much lower in submarine channels than that of open channel flows with a free surface. This causes the flow to be significantly super-elevated about the channel margin causing overspill and building the levees. [11]

Lateral migration and accretion plays an important part in fluvial systems. It is the feature of submarine channels that is most analogous with its terrestrial counterpart. It consists of erosion on the outerbank and deposition on the inner bank as a point bar. [21] [22] However, there are significant dissimilarities the biggest in that submarine channels can exhibit both lateral and vertical migration. [19] [23] [24] Fluvial systems do not exhibit this vertical component. Lateral accretion packages are believed to form as a result of depositional rather than topographical forcing. This lateral migration only style of sinuosity is believed to be somewhat rare in occurrence within turbidite systems. [21]

Vertical migration is exhibited in submarine channels systems in the form of channel stacking. As flows in channels subside, channels are infilled with sediment. When the flow is re-initiated, there is then a slight shift laterally in the flow thalweg causing a displaced incision. Mayall suggests that this vertical movement could be as a result of changes in seafloor topography due to salt/shale tectonics or fault movement. [11] The other alternative they suggest is through undefined “depositional processes”. One potential process may be as a result of heterogeneous infilling of the older channel forming an offset conduit for later flows. Whatever the process this stacking plays an important role in aggradational systems and potentially is one of the leading controls in the formation of levee confined complexes. In terms of sinuosity, Mayall hows that this vertical migration occurs on the outward sides of bends reinforcing any pre-existing curvature. [11]

Aggradational channels commonly form where the slope is “below grade.” This results in the deposition of broad, amalgamated and highly sand rich channels which are significantly affected by the slope morphology. [6] The channel width versus slope relationship is control by the Froude number of flows along the channel. When Froude numbers are low (<1.0) channel widths remain constant, however when Froude number oscillate around unity, channel widths fall rapidly with channel-floor slope. This provides a mechanism for generating channel widths capable of maintaining near-critical flow by channel narrowing and enhanced sedimentation. This behavior is controlled by an unknown constant that could not be found experimentally.

The morphology and topography of the slope that any turbidite channel crosses is inevitably going to affect the geometry of the channel. This can result in subtle changes in channel path to major diversions in channel flow. Topographic influences can come in the form of the surface expression of faults or changes in topography as a result of salt/shale tectonics, whether through diapirism or subsurface folding.

Underwater waves

Underwater channels can carry underwater waves. [25]

See also

Related Research Articles

<span class="mw-page-title-main">Turbidite</span> Geologic deposit of a turbidity current

A turbidite is the geologic deposit of a turbidity current, which is a type of amalgamation of fluidal and sediment gravity flow responsible for distributing vast amounts of clastic sediment into the deep ocean.

<span class="mw-page-title-main">Turbidity current</span> An underwater current of usually rapidly moving, sediment-laden water moving down a slope

A turbidity current is most typically an underwater current of usually rapidly moving, sediment-laden water moving down a slope; although current research (2018) indicates that water-saturated sediment may be the primary actor in the process. Turbidity currents can also occur in other fluids besides water.

<span class="mw-page-title-main">Bengal Fan</span>

The Bengal Fan, also known as the Ganges Fan, is the largest submarine fan on Earth.

<span class="mw-page-title-main">Meander</span> One of a series of curves in a channel of a matured stream

A meander is one of a series of regular sinuous curves in the channel of a river or other watercourse. It is produced as a watercourse erodes the sediments of an outer, concave bank and deposits sediments on an inner, convex bank which is typically a point bar. The result of this coupled erosion and sedimentation is the formation of a sinuous course as the channel migrates back and forth across the axis of a floodplain.

<span class="mw-page-title-main">Ecca Group</span> Second of the main subdivisions of the Karoo Supergroup of geological strata in southern Africa

The Ecca Group is the second of the main subdivisions of the Karoo Supergroup of geological strata in southern Africa. It mainly follows conformably after the Dwyka Group in some sections, but in some localities overlying unconformably over much older basement rocks. It underlies the Beaufort Group in all known outcrops and exposures. Based on stratigraphic position, lithostratigraphic correlation, palynological analyses, and other means of geological dating, the Ecca Group ranges between Early to earliest Middle Permian in age.

<span class="mw-page-title-main">Salt tectonics</span> Geometries and processes associated with the presence of significant thicknesses of evaporites

Salt tectonics, or halokinesis, or halotectonics, is concerned with the geometries and processes associated with the presence of significant thicknesses of evaporites containing rock salt within a stratigraphic sequence of rocks. This is due both to the low density of salt, which does not increase with burial, and its low strength.

<span class="mw-page-title-main">Accretionary wedge</span> The sediments accreted onto the non-subducting tectonic plate at a convergent plate boundary

An accretionary wedge or accretionary prism forms from sediments accreted onto the non-subducting tectonic plate at a convergent plate boundary. Most of the material in the accretionary wedge consists of marine sediments scraped off from the downgoing slab of oceanic crust, but in some cases the wedge includes the erosional products of volcanic island arcs formed on the overriding plate.

<span class="mw-page-title-main">Avulsion (river)</span> Rapid abandonment of a river channel and formation of a new channel

In sedimentary geology and fluvial geomorphology, avulsion is the rapid abandonment of a river channel and the formation of a new river channel. Avulsions occur as a result of channel slopes that are much less steep than the slope that the river could travel if it took a new course.

<span class="mw-page-title-main">Alluvial river</span> Type of river

An alluvial river is one in which the bed and banks are made up of mobile sediment and/or soil. Alluvial rivers are self-formed, meaning that their channels are shaped by the magnitude and frequency of the floods that they experience, and the ability of these floods to erode, deposit, and transport sediment. For this reason, alluvial rivers can assume a number of forms based on the properties of their banks; the flows they experience; the local riparian ecology; and the amount, size, and type of sediment that they carry.

<span class="mw-page-title-main">Contourite</span> Type of sedimentary deposit

A contourite is a sedimentary deposit commonly formed on continental rise to lower slope settings, although they may occur anywhere that is below storm wave base. Countourites are produced by thermohaline-induced deepwater bottom currents and may be influenced by wind or tidal forces. The geomorphology of contourite deposits is mainly influenced by the deepwater bottom-current velocity, sediment supply, and seafloor topography.

<span class="mw-page-title-main">Sediment gravity flow</span> Sediment transport mechanism

A sediment gravity flow is one of several types of sediment transport mechanisms, of which most geologists recognize four principal processes. These flows are differentiated by their dominant sediment support mechanisms, which can be difficult to distinguish as flows can be in transition from one type to the next as they evolve downslope.

<span class="mw-page-title-main">Offshore Indus Basin</span> Basin in offshore Pakistan

The offshore Indus Basin is one of the two basins in offshore Pakistan, the other one being the offshore Makran Basin. The Murray Ridge separates the two basins. The offshore Indus basin is approximately 120 to 140 kilometers wide and has an areal extent of ~20,000 square km.

<span class="mw-page-title-main">Geological history of Borneo</span>

The base of rocks that underlie Borneo, an island in Southeast Asia, was formed by the arc-continent collisions, continent–continent collisions and subduction–accretion due to convergence between the Asian, India–Australia, and Philippine Sea-Pacific plates over the last 400 million years. The active geological processes of Borneo are mild as all of the volcanoes are extinct. The geological forces shaping SE Asia today are from three plate boundaries: the collisional zone in Sulawesi southeast of Borneo, the Java-Sumatra subduction boundary and the India-Eurasia continental collision.

<span class="mw-page-title-main">Val Verde Basin</span> Foreland basin

The Val Verde Basin is a marginal foreland basin located in West Texas, just southeast of the Midland Basin. The Val Verde is a sub-basin of the larger Permian Basin and is roughly 24–40 km wide by 240 km long. It is an unconventional system and its sediments were deposited during a long period of flooding during the Middle to Late Cretaceous. This flooding event is referred to as the Western Interior Seaway, and many basins in the Western United States can attribute their oil and gas producing basins to carbonate deposition during this time period.

Madeira Abyssal Plain, also called Madeira Plain, is an abyssal plain situated at the center and deepest part of the Canary Basin. It is a north-northeast to south-southeast elongated basin that almost parallels the Mid-Atlantic Ridge. Its western boundary is marked by a chain of seamounts known as the either Seewarte Seamounts or Atlantis-Great Meteor Seamount Chain. Its eastern boundary is a distinct break of slope that marks the foot of the African Continental Rise. This abyssal plain occupies an area of about 68,000 km2 (26,000 sq mi). Across this basin, slope angles are generally less than 0.01°.

<span class="mw-page-title-main">Indus Fan</span>

The Indus Fan is one of the most significant depositional feature of the offshore Indus basin. It is the second largest fan system in the world after the Bengal Fan between India, Bangladesh and the Andaman Islands. The Indus fan was deposited in an unconfined setting on the continental slope, rise and basin floor, covering much of the Arabian Sea. The entire fan extends over an area of 110,000 square kilometers with greater than 9 km of sediment accumulating near the toe-of-slope.

The Laga Basin is the largest and youngest foreland basin of the Central Apennines fold and thrust belt. It is Messinian in age and serves as a link between an Early Miocene aged fold and thrust belt at the west of the Central Apennines and a younger belt to the east. In the 1980s and 1990s, it was the subject of numerous investigations for hydrocarbon resources, and since has become a valuable analogue with relation to clastic reservoirs developed in confined structural settings.

Cyclic steps are rhythmic bedforms associated with Froude super-critical flow instability. They are a type of sediment wave, and are created when supercritical sediment-laden water travels downslope through sediment beds. Each ‘step’ has a steep drop, and together they tend to migrate upstream. On the ocean floor, this phenomenon was first shown to be possible in 2006, although it was observed in open-channel flows over a decade earlier. Geological features appearing to be submarine cyclic steps have been detected in the northern lowlands of Mars in the Aeolis Mensae region, providing evidence of an ancient Martian ocean.

References

  1. ↑ Weimer et al., 2000[ full citation needed ]
  2. ↑ Flood, Roger D.; Damuth, John E. (1 June 1987). "Quantitative characteristics of sinuous distributary channels on the Amazon Deep-Sea Fan". GSA Bulletin. 98 (6): 728–738. doi:10.1130/0016-7606(1987)98<728:QCOSDC>2.0.CO;2. ISSN   0016-7606.
  3. 1 2 3 Kane, Ian A.; McCaffrey, William D.; Peakall, Jeff (1 January 2010). "On the origin of paleocurrent complexity within deep marine channel levees". Journal of Sedimentary Research. 80 (1): 54–66. doi:10.2110/jsr.2010.003. ISSN   1527-1404.
  4. ↑ Bull, Suzanne; Cartwright, Joe; Huuse, Mads (1 August 2009). "A review of kinematic indicators from mass-transport complexes using 3D seismic data". Marine and Petroleum Geology. 26 (7): 1132–1151. doi:10.1016/j.marpetgeo.2008.09.011. ISSN   0264-8172.
  5. ↑ Frey Martinez, Jose; Cartwright, Joe; Hall, Ben (1 March 2005). "3D seismic interpretation of slump complexes: examples from the continental margin of Israel" (PDF). Basin Research. 17 (1): 83–108. doi:10.1111/j.1365-2117.2005.00255.x. ISSN   1365-2117. S2CID   130270471.
  6. 1 2 Gee, M. J. R.; Gawthorpe, R. L.; Friedmann, S. J. (1 January 2006). "Triggering and evolution of a giant submarine landslide, offshore angola, revealed by 3d seismic stratigraphy and geomorphology". Journal of Sedimentary Research. 76 (1): 9–19. doi:10.2110/jsr.2006.02. ISSN   1527-1404.
  7. ↑ Masson et al., 2006[ full citation needed ]
  8. ↑ Shipp et al., 2004[ full citation needed ]
  9. ↑ "Sea floor geology – Hikurangi Channel". Te Ara Encyclopedia of New Zealand. Retrieved 2008-04-09.
  10. 1 2 Wynn et al., 2007[ full citation needed ]
  11. 1 2 3 4 5 Mayall, Mike; Jones, Ed; Casey, Mick (1 September 2006). "Turbidite channel reservoirs—Key elements in facies prediction and effective development". Marine and Petroleum Geology. 23 (8): 821–841. doi:10.1016/j.marpetgeo.2006.08.001. ISSN   0264-8172.
  12. ↑ Kane, Ian A.; Hodgson, David M. (1 March 2011). "Sedimentological criteria to differentiate submarine channel levee subenvironments: Exhumed examples from the Rosario Fm. (Upper Cretaceous) of Baja California, Mexico, and the Fort Brown Fm. (Permian), Karoo Basin, S. Africa". Marine and Petroleum Geology. Thematic set on strategic evolution of deep-water architecture. 28 (3): 807–823. doi:10.1016/j.marpetgeo.2010.05.009. ISSN   0264-8172.
  13. ↑ Flood, 2001[ full citation needed ]
  14. 1 2 Deptuck, Mark E; Steffens, Gary S; Barton, Mark; Pirmez, Carlos (1 June 2003). "Architecture and evolution of upper fan channel-belts on the Niger Delta slope and in the Arabian Sea" (PDF). Marine and Petroleum Geology. Turbidites: Models and Problems. 20 (6): 649–676. doi:10.1016/j.marpetgeo.2003.01.004. ISSN   0264-8172.[ dead link ]
  15. ↑ Posamentier, Henry W.; Kolla, Venkatarathnan (1 May 2003). "Seismic geomorphology and stratigraphy of depositional elements in deep-water settings" (PDF). Journal of Sedimentary Research. 73 (3): 367–388. doi:10.1306/111302730367. ISSN   1527-1404. S2CID   34598056. Archived from the original (PDF) on 2 January 2020.
  16. ↑ Schwarz, Ernesto; Arnott, R. William C. (1 February 2007). "Anatomy and evolution of a slope channel-complex set (Neoproterozoic Isaac formation, Windermere supergroup, southern Canadian cordillera): Implications for reservoir characterization" (PDF). Journal of Sedimentary Research. 77 (2): 89–109. doi:10.2110/jsr.2007.015. ISSN   1527-1404.
  17. ↑ Damuth, John E.; Flood, Roger D.; Kowsmann, Renato O.; belderson, Robert H.; Gorini, Marcus A. (1988). "Anatomy and growth pattern of amazon deep-sea fan as revealed by long-range side-scan sonar (GLORIA) and high-resolution seismic studies". AAPG Bulletin. 72 (8): 885–911. ISSN   0149-1423.
  18. ↑ Babonneau, N.; Savoye, B.; Cremer, M.; Bez, M. (1 January 2004). "Multiple terraces within the deep incised Zaire Valley (ZaïAngo Project): Are they confined levees?". Geological Society, London, Special Publications. 222 (1): 91–114. doi:10.1144/GSL.SP.2004.222.01.06. ISSN   0305-8719. S2CID   128603620.
  19. 1 2 Peakall, Jeff; McCaffrey, Bill; Kneller, Ben (1 May 2000). "A process model for the evolution, morphology, and architecture of sinuous submarine channels". Journal of Sedimentary Research. 70 (3): 434–448. doi:10.1306/2DC4091C-0E47-11D7-8643000102C1865D. ISSN   1527-1404.
  20. ↑ Clark, J. D.; Kenyon, N. H.; Pickering, K. T. (1 July 1992). "Quantitative analysis of the geometry of submarine channels: Implications for the classification of submarine fans". Geology. 20 (7): 633–636. doi:10.1130/0091-7613(1992)020<0633:QAOTGO>2.3.CO;2. ISSN   0091-7613.
  21. 1 2 Abreu, Vitor; Sullivan, Morgan; Pirmez, Carlos; Mohrig, David (1 June 2003). "Lateral accretion packages (LAPs): an important reservoir element in deep water sinuous channels". Marine and Petroleum Geology. Turbidites: Models and Problems. 20 (6): 631–648. doi:10.1016/j.marpetgeo.2003.08.003. ISSN   0264-8172.
  22. ↑ Arnott, R. W. C. (1 June 2007). "Stratal architecture and origin of lateral accretion deposits (LADs) and conterminuous inner-bank levee deposits in a base-of-slope sinuous channel, lower Isaac Formation (Neoproterozoic), East-Central British Columbia, Canada". Marine and Petroleum Geology. Sinuous Deep-Water Channels: Genesis, Geometry and Architecture. 24 (6): 515–528. doi:10.1016/j.marpetgeo.2007.01.006. ISSN   0264-8172.
  23. ↑ Kolla, V.; Coumes, F. (1987). "Morphology, internal structure, seismic stratigraphy, and sedimentation of indus fan". AAPG Bulletin. 71 (6): 650–677. ISSN   0149-1423.
  24. ↑ McHargue, Timothy R. (1991). "Seismic Facies, Processes, and Evolution of Miocene Inner Fan Channels, Indus Submarine Fan". Seismic Facies and Sedimentary Processes of Submarine Fans and Turbidite Systems. Frontiers in Sedimentary Geology. Springer, New York, NY. pp. 403–413. doi:10.1007/978-1-4684-8276-8_22. ISBN   978-1-4684-8278-2.
  25. ↑ "Underwater Waves are the Earth's 'Lumbering Giants'". Consortium for Ocean Leadership. 23 May 2014. Archived from the original on 11 September 2017. Retrieved 10 September 2017.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.