Adiabatic wall

Last updated

In thermodynamics, an adiabatic wall between two thermodynamic systems does not allow heat or chemical substances to pass across it, in other words there is no heat transfer or mass transfer.

Contents

In theoretical investigations, it is sometimes assumed that one of the two systems is the surroundings of the other. Then it is assumed that the work transferred is reversible within the surroundings, but in thermodynamics it is not assumed that the work transferred is reversible within the system. The assumption of reversibility in the surroundings has the consequence that the quantity of work transferred is well defined by macroscopic variables in the surroundings. Accordingly, the surroundings are sometimes said to have a reversible work reservoir.

Along with the idea of an adiabatic wall is that of an adiabatic enclosure. It is easily possible that a system has some boundary walls that are adiabatic and others that are not. When some are not adiabatic, then the system is not adiabatically enclosed, though adiabatic transfer of energy as work can occur across the adiabatic walls.

The adiabatic enclosure is important because, according to one widely cited author, Herbert Callen, "An essential prerequisite for the measurability of energy is the existence of walls that do not permit the transfer of energy in the form of heat." [1] In thermodynamics, it is customary to assume a priori the physical existence of adiabatic enclosures, though it is not customary to label this assumption separately as an axiom or numbered law.

Construction of the concept of an adiabatic enclosure

Definitions of transfer of heat

In theoretical thermodynamics, respected authors vary in their approaches to the definition of quantity of heat transferred. There are two main streams of thinking. One is from a primarily empirical viewpoint (which will here be referred to as the thermodynamic stream), to define heat transfer as occurring only by specified macroscopic mechanisms; loosely speaking, this approach is historically older. The other (which will here be referred to as the mechanical stream) is from a primarily theoretical viewpoint, to define it as a residual quantity after transfers of energy as macroscopic work, between two bodies or closed systems, have been determined for a process, so as to conform with the principle of conservation of energy or the first law of thermodynamics for closed systems; this approach grew in the twentieth century, though was partly manifest in the nineteenth. [2]

Thermodynamic stream of thinking

In the thermodynamic stream of thinking, the specified mechanisms of heat transfer are conduction and radiation. These mechanisms presuppose recognition of temperature; empirical temperature is enough for this purpose, though absolute temperature can also serve. In this stream of thinking, quantity of heat is defined primarily through calorimetry. [3] [4] [5] [6]

Though its definition of them differs from that of the mechanical stream of thinking, the empirical stream of thinking nevertheless presupposes the existence of adiabatic enclosures. It defines them through the concepts of heat and temperature. These two concepts are coordinately coherent in the sense that they arise jointly in the description of experiments of transfer of energy as heat. [7]

Mechanical stream of thinking

In the mechanical stream of thinking about a process of transfer of energy between two bodies or closed systems, heat transferred is defined as a residual amount of energy transferred after the energy transferred as work has been determined, assuming for the calculation the law of conservation of energy, without reference to the concept of temperature. [8] [9] [10] [11] [12] [13] There are five main elements of the underlying theory.

  • The existence of states of thermodynamic equilibrium, determinable by precisely one (called the non-deformation variable) more variable of state than the number of independent work (deformation) variables.
  • That a state of internal thermodynamic equilibrium of a body have a well defined internal energy, that is postulated by the first law of thermodynamics.
  • The universality of the law of conservation of energy.
  • The recognition of work as a form of energy transfer.
  • The universal irreversibility of natural processes.
  • The existence of adiabatic enclosures.
  • The existence of walls permeable only to heat.

Axiomatic presentations of this stream of thinking vary slightly, but they intend to avoid the notions of heat and of temperature in their axioms. It is essential to this stream of thinking that heat is not presupposed as being measurable by calorimetry. It is essential to this stream of thinking that, for the specification of the thermodynamic state of a body or closed system, in addition to the variables of state called deformation variables, there be precisely one extra real-number-valued variable of state, called the non-deformation variable, though it should not be axiomatically recognized as an empirical temperature, even though it satisfies the criteria for one.

Accounts of the adiabatic wall

The authors Buchdahl, Callen, and Haase make no mention of the passage of radiation, thermal or coherent, across their adiabatic walls. Carathéodory explicitly discusses problems with respect to thermal radiation, which is incoherent, and he was probably unaware of the practical possibility of laser light, which is coherent. Carathéodory in 1909 says that he leaves such questions unanswered.

For the thermodynamic stream of thinking, the notion of empirical temperature is coordinately presupposed in the notion of heat transfer for the definition of an adiabatic wall. [7]

For the mechanical stream of thinking, the exact way in which the adiabatic wall is defined is important.

In the presentation of Carathéodory, it is essential that the definition of the adiabatic wall should in no way depend upon the notions of heat or temperature. [9] This is achieved by careful wording and reference to transfer of energy only as work. Buchdahl is careful in the same way. [12] Nevertheless, Carathéodory explicitly postulates the existence of walls that are permeable only to heat, that is to say impermeable to work and to matter, but still permeable to energy in some unspecified way. One might be forgiven for inferring from this that heat is energy in transfer across walls permeable only to heat, and that such exist as undefined postulated primitives.

In the widely cited presentation of Callen, [1] the notion of an adiabatic wall is introduced as a limit of a wall that is poorly conductive of heat. Although Callen does not here explicitly mention temperature, he considers the case of an experiment with melting ice, done on a summer's day, when, the reader may speculate, the temperature of the surrounds would be higher. Nevertheless, when it comes to a hard core definition, Callen does not use this introductory account. He eventually defines an adiabatic enclosure as does Carathéodory, that it passes energy only as work, and does not pass matter. Accordingly, he defines heat, therefore, as energy that is transferred across the boundary of a closed system other than by work.

As suggested for example by Carathéodory and used for example by Callen, the favoured instance of an adiabatic wall is that of a Dewar flask. A Dewar flask has rigid walls. Nevertheless, Carathéodory requires that his adiabatic walls shall be imagined to be flexible, and that the pressures on these flexible walls be adjusted and controlled externally so that the walls are not deformed, unless a process is undertaken in which work is transferred across the walls. The work considered by Carathéodory is pressure-volume work. Another text considers asbestos and fiberglass as good examples of materials that constitute a practicable adiabatic wall. [14]

The mechanical stream of thinking thus regards the adiabatic enclosure's property of not allowing the transfer of heat across itself as a deduction from the Carathéodory axioms of thermodynamics.

Related Research Articles

<span class="mw-page-title-main">Adiabatic process</span> Thermodynamic process in which no mass or heat is exchanged with surroundings

In thermodynamics, an adiabatic process is a type of thermodynamic process that occurs without transferring heat or mass between the thermodynamic system and its environment. Unlike an isothermal process, an adiabatic process transfers energy to the surroundings only as work. As a key concept in thermodynamics, the adiabatic process supports the theory that explains the first law of thermodynamics.

<span class="mw-page-title-main">Entropy</span> Property of a thermodynamic system

Entropy is a scientific concept, as well as a measurable physical property, that is most commonly associated with a state of disorder, randomness, or uncertainty. The term and the concept are used in diverse fields, from classical thermodynamics, where it was first recognized, to the microscopic description of nature in statistical physics, and to the principles of information theory. It has found far-ranging applications in chemistry and physics, in biological systems and their relation to life, in cosmology, economics, sociology, weather science, climate change, and information systems including the transmission of information in telecommunication.

<span class="mw-page-title-main">Thermodynamics</span> Physics of heat, work, and temperature

Thermodynamics is a branch of physics that deals with heat, work, and temperature, and their relation to energy, entropy, and the physical properties of matter and radiation. The behavior of these quantities is governed by the four laws of thermodynamics which convey a quantitative description using measurable macroscopic physical quantities, but may be explained in terms of microscopic constituents by statistical mechanics. Thermodynamics applies to a wide variety of topics in science and engineering, especially physical chemistry, biochemistry, chemical engineering and mechanical engineering, but also in other complex fields such as meteorology.

<span class="mw-page-title-main">Second law of thermodynamics</span> Physical law for entropy and heat

The second law of thermodynamics is a physical law based on universal experience concerning heat and energy interconversions. One simple statement of the law is that heat always moves from hotter objects to colder objects, unless energy in some form is supplied to reverse the direction of heat flow. Another definition is: "Not all heat energy can be converted into work in a cyclic process."

<span class="mw-page-title-main">First law of thermodynamics</span> Law of thermodynamics distinguishing heat, work, and matter transfers

The first law of thermodynamics is a formulation of the law of conservation of energy, adapted for thermodynamic processes. It distinguishes in principle two forms of energy transfer, heat and thermodynamic work for a system of a constant amount of matter. The law also defines the internal energy of a system, an extensive property for taking account of the balance of energies in the system.

<span class="mw-page-title-main">Zeroth law of thermodynamics</span> Physical law for definition of temperature

The zeroth law of thermodynamics is one of the four principal laws of thermodynamics. It provides an independent definition of temperature without reference to entropy, which is defined in the second law. The law was established by Ralph H. Fowler in the 1930s, long after the first, second, and third laws were widely recognized.

Thermodynamic equilibrium is an axiomatic concept of thermodynamics. It is an internal state of a single thermodynamic system, or a relation between several thermodynamic systems connected by more or less permeable or impermeable walls. In thermodynamic equilibrium there are no net macroscopic flows of matter or of energy, within a system or between systems. In a system that is in its own state of internal thermodynamic equilibrium, no macroscopic change occurs.

<span class="mw-page-title-main">Internal energy</span> Energy contained within a system

The internal energy of a thermodynamic system is the total energy contained within it. It is the energy necessary to create or prepare the system in its given internal state, and includes the contributions of potential energy and internal kinetic energy. It keeps account of the gains and losses of energy of the system that are due to changes in its internal state. It does not include the kinetic energy of motion of the system as a whole, or any external energies from surrounding force fields. The internal energy of an isolated system is constant, which is expressed as the law of conservation of energy, a foundation of the first law of thermodynamics. The internal energy is an extensive property.

<span class="mw-page-title-main">Isentropic process</span> Thermodynamic process that is reversible and adiabatic

In thermodynamics, an isentropic process is an idealized thermodynamic process that is both adiabatic and reversible. The work transfers of the system are frictionless, and there is no net transfer of heat or matter. Such an idealized process is useful in engineering as a model of and basis of comparison for real processes. This process is idealized because reversible processes do not occur in reality; thinking of a process as both adiabatic and reversible would show that the initial and final entropies are the same, thus, the reason it is called isentropic. Thermodynamic processes are named based on the effect they would have on the system. Even though in reality it is not necessarily possible to carry out an isentropic process, some may be approximated as such.

<span class="mw-page-title-main">Reversible process (thermodynamics)</span> Thermodynamic process whose direction can be reversed to return the system to its original state

In thermodynamics, a reversible process is a process, involving a system and its surroundings, whose direction can be reversed by infinitesimal changes in some properties of the surroundings, such as pressure or temperature.

<span class="mw-page-title-main">Thermodynamic system</span> Body of matter in a state of internal equilibrium

A thermodynamic system is a body of matter and/or radiation, confined in space by walls, with defined permeabilities, which separate it from its surroundings. The surroundings may include other thermodynamic systems, or physical systems that are not thermodynamic systems. A wall of a thermodynamic system may be purely notional, when it is described as being 'permeable' to all matter, all radiation, and all forces. A state of a thermodynamic system can be fully described in several different ways, by several different sets of thermodynamic state variables.

<span class="mw-page-title-main">Thermal equilibrium</span> State of no net thermal energy flow between two connected systems

Two physical systems are in thermal equilibrium if there is no net flow of thermal energy between them when they are connected by a path permeable to heat. Thermal equilibrium obeys the zeroth law of thermodynamics. A system is said to be in thermal equilibrium with itself if the temperature within the system is spatially uniform and temporally constant.

<span class="mw-page-title-main">Laws of thermodynamics</span> Observational basis of thermodynamics

The laws of thermodynamics are a set of scientific laws which define a group of physical quantities, such as temperature, energy, and entropy, that characterize thermodynamic systems in thermodynamic equilibrium. The laws also use various parameters for thermodynamic processes, such as thermodynamic work and heat, and establish relationships between them. They state empirical facts that form a basis of precluding the possibility of certain phenomena, such as perpetual motion. In addition to their use in thermodynamics, they are important fundamental laws of physics in general, and are applicable in other natural sciences.

<span class="mw-page-title-main">Thermodynamic state</span> Quantifiable conditions of a thermodynamic system at a specific time

In thermodynamics, a thermodynamic state of a system is its condition at a specific time; that is, fully identified by values of a suitable set of parameters known as state variables, state parameters or thermodynamic variables. Once such a set of values of thermodynamic variables has been specified for a system, the values of all thermodynamic properties of the system are uniquely determined. Usually, by default, a thermodynamic state is taken to be one of thermodynamic equilibrium. This means that the state is not merely the condition of the system at a specific time, but that the condition is the same, unchanging, over an indefinitely long duration of time.

<span class="mw-page-title-main">Thermodynamic process</span> Passage of a system from an initial to a final state of thermodynamic equilibrium

Classical thermodynamics considers three main kinds of thermodynamic process: (1) changes in a system, (2) cycles in a system, and (3) flow processes.

<span class="mw-page-title-main">Work (thermodynamics)</span> Type of energy transfer

In thermodynamics, work is one of the principal processes by which a thermodynamic system can interact with its surroundings and exchange energy. An exchange of energy is facilitated by a mechanism through which the system can spontaneously exert macroscopic forces on its surroundings, or vice versa. In the surroundings, this mechanical work can lift a weight, for example.

<span class="mw-page-title-main">Heat</span> Type of energy transfer

In thermodynamics, heat is defined as the form of energy crossing the boundary of a thermodynamic system by virtue of a temperature difference across the boundary. A thermodynamic system does not contain heat. Nevertheless, the term is also often used to refer to the thermal energy contained in a system as a component of its internal energy and that is reflected in the temperature of the system. For both uses of the term, heat is a form of energy.

<span class="mw-page-title-main">Temperature</span> Physical quantity that expresses hot and cold

Temperature is a physical quantity that expresses quantitatively the perceptions of hotness and coldness. Temperature is measured with a thermometer.

A thermodynamic operation is an externally imposed manipulation that affects a thermodynamic system. The change can be either in the connection or wall between a thermodynamic system and its surroundings, or in the value of some variable in the surroundings that is in contact with a wall of the system that allows transfer of the extensive quantity belonging that variable. It is assumed in thermodynamics that the operation is conducted in ignorance of any pertinent microscopic information.

In thermodynamics, a diathermal wall between two thermodynamic systems allows heat transfer but do not allow transfer of matter across it.

References

  1. 1 2 Callen, H.B. (1960/1985), p. 16.
  2. ↑ Bailyn, M. (1994), p. 79.
  3. ↑ Maxwell, J.C. (1871), Chapter III.
  4. ↑ Planck, M. (1897/1903), p. 33.
  5. ↑ Kirkwood & Oppenheim (1961), p. 16.
  6. ↑ Beattie & Oppenheim (1979), Section 3.13.
  7. 1 2 Planck. M. (1897/1903).
  8. ↑ Bryan, G.H. (1907), p. 47.
  9. 1 2 Carathéodory, C. (1909).
  10. ↑ Born, M. (1921).
  11. ↑ Guggenheim, E.A. (1965), p. 10.
  12. 1 2 Buchdahl, H.A. (1966), p. 43.
  13. ↑ Haase, R. (1971), p. 25.
  14. ↑ Reif, F. (1965), p. 68.

Bibliography

  • Bailyn, M. (1994). A Survey of Thermodynamics, American Institute of Physics Press, New York, ISBN   0-88318-797-3.
  • Beattie, J.A., Oppenheim, I. (1979). Principles of Thermodynamics, Elsevier, Amsterdam, ISBN   0-444-41806-7.
  • Born, M. (1921). Kritische Betrachtungen zur traditionellen Darstellung der Thermodynamik, Physik. Zeitschr.22: 218–224.
  • Bryan, G.H. (1907). Thermodynamics. An Introductory Treatise dealing mainly with First Principles and their Direct Applications, B.G. Teubner, Leipzig.
  • Buchdahl, H.A. (1957/1966). The Concepts of Classical Thermodynamics, Cambridge University Press, London.
  • Callen, H.B. (1960/1985). Thermodynamics and an Introduction to Thermostatistics, second edition, John Wiley & Sons, New York, ISBN   0-471-86256-8.
  • C. Carathéodory (1909). "Untersuchungen über die Grundlagen der Thermodynamik". Mathematische Annalen. 67: 355–386. doi:10.1007/BF01450409. S2CID   118230148. A translation may be found here Archived 2019-10-12 at the Wayback Machine . A partly reliable translation is to be found at Kestin, J. (1976). The Second Law of Thermodynamics, Dowden, Hutchinson & Ross, Stroudsburg PA.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.