 | This article has multiple issues. Please help improve it or discuss these issues on the talk page . (Learn how and when to remove these template messages)
|
Apparent wind is the wind experienced by a moving object.
| This article has multiple issues. Please help improve it or discuss these issues on the talk page . (Learn how and when to remove these template messages)
|
Apparent wind is the wind experienced by a moving object.
The apparent wind is the wind experienced by an observer in motion and is the relative velocity of the wind in relation to the observer.[ citation needed ]
The velocity of the apparent wind is the vector sum of the velocity of the headwind (which is the velocity a moving object would experience in still air) plus the velocity of the true wind. The headwind is the additive inverse of the object's velocity; therefore, the velocity of the apparent wind can also be defined as a vector sum of the velocity of the true wind minus the velocity of the object.[ citation needed ]
In sailing, apparent wind is the speed and direction of wind indicated by a wind instrument (anemometer) on a moving craft (on water, land or ice) in undisturbed air. It is composed of the combined speeds and directions of the craft and wind observed by a stationary wind instrument—the true wind. A true wind coming from the bow increases the apparent wind induced by the speed of the craft, coming from the stern it decreases apparent wind, and coming from the side the apparent wind angle and speed change according to the combined speed and direction of each the craft and the true wind. Apparent wind is important to sailors in order to set sail angle with respect to the wind and to anticipate how much power the wind will generate on a point of sail. Apparent wind differs in speed and direction from the true wind that is experienced by a stationary observer and composed of the true wind speed (TWS) and true wind direction (TWD) or the TWS and true wind angle (TWA) relative to the boat if it were stationary. [1] In nautical terminology, apparent wind is measured in knots and degrees.
Note that a number of additional factors come into play when converting the measurements from the masthead anemometer into the true wind if a high degree of accuracy is required, including the following: [2] [3] [4]
In the presence of a current, the true wind is considered to be that measured on the craft drifting with the water over the bottom, and wind with respect to the sea bed as the ground or geographical wind.[ citation needed ]
The apparent wind on board (a boat) is often quoted as a speed measured by a masthead transducer containing an anemometer and wind vane that measures wind speed in knots and wind direction in degrees relative to the heading of the boat. Modern instrumentation can calculate the true wind velocity when the apparent wind and boat speed and direction are input.[ citation needed ]
In sailboat racing, and especially in speed sailing, apparent wind is a vital factor, when determining the points of sail a sailboat can effectively travel in. A vessel traveling at increasing speed relative to the prevailing wind will encounter the wind driving the sail at a decreasing angle and increasing velocity. Eventually, the increased drag and diminished degree of efficiency of a sail at extremely low angles will cause a loss of accelerating force. This constitutes the main limitation to the speed of wind-driven vessels and vehicles.[ citation needed ]
Windsurfers and certain types of boats are able to sail faster than the true wind. These include fast multihulls and some planing monohulls. Ice-sailors and land-sailors also usually fall into this category, because of their relatively low amount of drag or friction.[ citation needed ]
In the foiling AC72 America's cup catamarans, the boats sail through the water at up to double the environmental wind strength. The effect of this is to radically change the apparent wind direction when sailing "downwind". In these boats the forward speed is so great that the apparent wind is always forward—at an angle that varies between 2 and 4 degrees to the wing sail. This means that AC72's are effectively tacking downwind, although at a greater angle than the normal 45-degree upwind angle, usually between 50 and 70 degrees. [5]
In fixed-wing aircraft, apparent wind is what is experienced on board, and it determines the necessary speeds for take-off and landing. Aircraft carriers generally steam directly upwind at maximum speed, in order to increase apparent wind and reduce the necessary take-off velocity. Land-based airport traffic, as well as most mid-sized and large birds generally take off and land facing upwind for the same reason.[ citation needed ]
 |
Where:
The above formula is derived from the Law of cosines and using .
The angle of apparent wind () can be calculated from the measured velocity of the boat and wind using the inverse cosine in degrees ()
If the velocity of the boat and the velocity and the angle of the apparent wind are known, for instance from a measurement, the true wind velocity and direction can be calculated with:
and
Note: Due to quadrant ambiguity, this equation for is only valid when the apparent winds are coming from the starboard direction (0° < β < 180°). For port apparent winds (180° < β < 360° or 0° > β > -180°), the true pointing angle (α) has the opposite sign:
A triangle is a polygon with three edges and three vertices. It is one of the basic shapes in geometry. A triangle with vertices A, B, and C is denoted .
The propagation constant of a sinusoidal electromagnetic wave is a measure of the change undergone by the amplitude and phase of the wave as it propagates in a given direction. The quantity being measured can be the voltage, the current in a circuit, or a field vector such as electric field strength or flux density. The propagation constant itself measures the change per unit length, but it is otherwise dimensionless. In the context of two-port networks and their cascades, propagation constant measures the change undergone by the source quantity as it propagates from one port to the next.
Flight dynamics is the science of air vehicle orientation and control in three dimensions. The three critical flight dynamics parameters are the angles of rotation in three dimensions about the vehicle's center of gravity (cg), known as pitch, roll and yaw. These are collectively known as aircraft attitude, often principally relative to the atmospheric frame in normal flight, but also relative to terrain during takeoff or landing, or when operating at low elevation. The concept of attitude is not specific to fixed-wing aircraft, but also extends to rotary aircraft such as helicopters, and dirigibles, where the flight dynamics involved in establishing and controlling attitude are entirely different.
In geometry, a hypotenuse is the longest side of a right-angled triangle, the side opposite the right angle. The length of the hypotenuse can be found using the Pythagorean theorem, which states that the square of the length of the hypotenuse equals the sum of the squares of the lengths of the other two sides. For example, if one of the other sides has a length of 3 and the other has a length of 4, then their squares add up to 25. The length of the hypotenuse is the square root of 25, that is, 5.
Projectile motion is a form of motion experienced by an object or particle that is projected in a gravitational field, such as from Earth's surface, and moves along a curved path under the action of gravity only. In the particular case of projectile motion of Earth, most calculations assume the effects of air resistance are passive and negligible. The curved path of objects in projectile motion was shown by Galileo to be a parabola, but may also be a straight line in the special case when it is thrown directly upwards. The study of such motions is called ballistics, and such a trajectory is a ballistic trajectory. The only force of mathematical significance that is actively exerted on the object is gravity, which acts downward, thus imparting to the object a downward acceleration towards the Earth’s center of mass. Because of the object's inertia, no external force is needed to maintain the horizontal velocity component of the object's motion. Taking other forces into account, such as aerodynamic drag or internal propulsion, requires additional analysis. A ballistic missile is a missile only guided during the relatively brief initial powered phase of flight, and whose remaining course is governed by the laws of classical mechanics.
A vibration in a string is a wave. Resonance causes a vibrating string to produce a sound with constant frequency, i.e. constant pitch. If the length or tension of the string is correctly adjusted, the sound produced is a musical tone. Vibrating strings are the basis of string instruments such as guitars, cellos, and pianos.
In celestial mechanics, true anomaly is an angular parameter that defines the position of a body moving along a Keplerian orbit. It is the angle between the direction of periapsis and the current position of the body, as seen from the main focus of the ellipse.
Relativistic beaming is the process by which relativistic effects modify the apparent luminosity of emitting matter that is moving at speeds close to the speed of light. In an astronomical context, relativistic beaming commonly occurs in two oppositely-directed relativistic jets of plasma that originate from a central compact object that is accreting matter. Accreting compact objects and relativistic jets are invoked to explain x-ray binaries, gamma-ray bursts, and, on a much larger scale, active galactic nuclei.
In relativistic physics, a velocity-addition formula is a three-dimensional equation that relates the velocities of objects in different reference frames. Such formulas apply to successive Lorentz transformations, so they also relate different frames. Accompanying velocity addition is a kinematic effect known as Thomas precession, whereby successive non-collinear Lorentz boosts become equivalent to the composition of a rotation of the coordinate system and a boost.
A specular highlight is the bright spot of light that appears on shiny objects when illuminated. Specular highlights are important in 3D computer graphics, as they provide a strong visual cue for the shape of an object and its location with respect to light sources in the scene.
A theoretical motivation for general relativity, including the motivation for the geodesic equation and the Einstein field equation, can be obtained from special relativity by examining the dynamics of particles in circular orbits about the earth. A key advantage in examining circular orbits is that it is possible to know the solution of the Einstein Field Equation a priori. This provides a means to inform and verify the formalism.
In geometry, various formalisms exist to express a rotation in three dimensions as a mathematical transformation. In physics, this concept is applied to classical mechanics where rotational kinematics is the science of quantitative description of a purely rotational motion. The orientation of an object at a given instant is described with the same tools, as it is defined as an imaginary rotation from a reference placement in space, rather than an actually observed rotation from a previous placement in space.
There are several equivalent ways for defining trigonometric functions, and the proof of the trigonometric identities between them depend on the chosen definition. The oldest and somehow the most elementary definition is based on the geometry of right triangles. The proofs given in this article use this definition, and thus apply to non-negative angles not greater than a right angle. For greater and negative angles, see Trigonometric functions.
In hyperbolic geometry, the "law of cosines" is a pair of theorems relating the sides and angles of triangles on a hyperbolic plane, analogous to the planar law of cosines from plane trigonometry, or the spherical law of cosines in spherical trigonometry. It can also be related to the relativistic velocity addition formula.
Solution of triangles is the main trigonometric problem of finding the characteristics of a triangle, when some of these are known. The triangle can be located on a plane or on a sphere. Applications requiring triangle solutions include geodesy, astronomy, construction, and navigation.
High-performance sailing is achieved with low forward surface resistance—encountered by catamarans, sailing hydrofoils, iceboats or land sailing craft—as the sailing craft obtains motive power with its sails or aerofoils at speeds that are often faster than the wind on both upwind and downwind points of sail. Faster-than-the-wind sailing means that the apparent wind angle experienced on the moving craft is always ahead of the sail. This has generated a new concept of sailing, called "apparent wind sailing", which entails a new skill set for its practitioners, including tacking on downwind points of sail.
Forces on sails result from movement of air that interacts with sails and gives them motive power for sailing craft, including sailing ships, sailboats, windsurfers, ice boats, and sail-powered land vehicles. Similar principles in a rotating frame of reference apply to windmill sails and wind turbine blades, which are also wind-driven. They are differentiated from forces on wings, and propeller blades, the actions of which are not adjusted to the wind. Kites also power certain sailing craft, but do not employ a mast to support the airfoil and are beyond the scope of this article.
Steady flight, unaccelerated flight, or equilibrium flight is a special case in flight dynamics where the aircraft's linear and angular velocity are constant in a body-fixed reference frame. Basic aircraft maneuvers such as level flight, climbs and descents, and coordinated turns can be modeled as steady flight maneuvers. Typical aircraft flight consists of a series of steady flight maneuvers connected by brief, accelerated transitions. Because of this, primary applications of steady flight models include aircraft design, assessment of aircraft performance, flight planning, and using steady flight states as the equilibrium conditions around which flight dynamics equations are expanded.
In accelerator physics, the Courant–Snyder parameters are a set of quantities used to describe the distribution of positions and velocities of the particles in a beam. When the positions along a single dimension and velocities along that dimension of every particle in a beam are plotted on a phase space diagram, an ellipse enclosing the particles can be given by the equation:
