Australian federal election, 1951

Last updated

Australian federal election, 1951
Flag of Australia.svg
  1949 28 April 1951 1954  

All 121 seats of the House of Representatives
61 seats were needed for a majority in the House
All 60 seats of the Senate

 First partySecond party
  Portrait Menzies 1950s.jpg Benchifley.jpg
Leader Robert Menzies Ben Chifley
Party Liberal/Country coalition Labor
Leader since23 September 194313 July 1945
Leader's seat Kooyong (Vic.) Macquarie (NSW)
Last election74 seats47 seats
Seats won69 seats52 seats
Seat changeDecrease2.svg5Increase2.svg5
Percentage50.70%49.30%
SwingDecrease2.svg0.30Increase2.svg0.30

Prime Minister before election

Robert Menzies
Liberal/Country coalition

Subsequent Prime Minister

Robert Menzies
Liberal/Country coalition

Federal elections were held in Australia on 28 April 1951. All 121 seats in the House of Representatives and all 60 seats in the Senate were up for election, due to a double dissolution called after the Senate rejected the Commonwealth Bank Bill. [1] The incumbent Liberal–Country coalition led by Prime Minister Robert Menzies defeated the opposition Labor Party led by Ben Chifley, and secured a majority in the Senate. Chifley died just over a month after the election.

Elections in Australia discussion of elections conducted in Australia

Elections in Australia take place periodically to elect the legislature of the Commonwealth of Australia, as well as for each Australian state and territory. Elections in all jurisdictions follow similar principles, though there are minor variations between them. The elections for the Australian Parliament are held under the federal electoral system, which is uniform throughout the country, and the elections for state and territory Parliaments are held under the electoral system of each state and territory.

Australian House of Representatives Lower house of Australia

The House of Representatives is the lower house of the bicameral Parliament of Australia, the upper house being the Senate. Its composition and powers are established in Chapter I of the Constitution of Australia.

Australian Senate upper house of the Australian Parliament

The Senate is the upper house of the bicameral Parliament of Australia, the lower house being the House of Representatives. The composition and powers of the Senate are established in Chapter I of the Constitution of Australia. There are a total of 76 Senators: 12 are elected from each of the six states regardless of population and 2 from each of the two autonomous internal territories. Senators are popularly elected under the single transferable vote system of proportional representation.

Contents

Issues

Although the Coalition had won a comfortable majority in the House in 1949, Labor still had a four-seat majority in the Senate. Chifley thus made it his business to obstruct Menzies' agenda at every opportunity. Realizing this, Menzies sought to call a double dissolution at the first opportunity in hopes of gaining control of both houses. He thought he had his chance in 1950, when he introduced a bill to ban the Australian Communist Party. However, after a redraft, Chifley let the bill pass.

A few months later, the Senate rejected the Commonwealth Banking Bill, finally giving Menzies an excuse to call a double dissolution. While the Coalition lost five House seats to Labor, it still had a solid mandate. More importantly, it picked up six Senate seats, giving it control over both chambers.

Results

House of Representatives

Labor: 52 seats
Liberal: 52 seats
Country: 17 seats Australian Federal Election, 1951.svg
  Labor: 52 seats
  Liberal: 52 seats
  Country: 17 seats
House of Reps (IRV) — 1951–54—Turnout 96.00% (CV) — Informal 1.90%
PartyVotes%SwingSeatsChange
  Liberal–Country coalition 2,298,51250.34+0.0869–5
  Liberal  1,854,79940.62+1.2352–3
  Country  443,7139.72–1.1517–2
  Labor 2,174,84047.63+1.6552+5
  Communist 44,7820.98+0.0900
  Independents 47,7651.05–1.1100
 Total4,565,899  121
Two-party-preferred (estimated)
  Liberal–Country coalition WIN50.700.30695
  Labor 49.30+0.3052+5

Notes
Popular Vote
Labor
47.63%
Liberal
40.62%
Country
9.72%
Independent
1.05%
Communist
0.98%
Two Party Preferred Vote
Coalition
50.70%
Labor
49.30%
Parliament Seats
Coalition
57.02%
Labor
42.98%

Senate

Senate (STV) — 1951–53—Turnout 95.99% (CV) — Informal 7.13%
PartyVotes%SwingSeats WonSeats HeldChange
  Liberal–Country coalition 2,198,68749.70–0.713232+6
 Liberal–Country joint ticket1,925,63143.52–1.1222N/AN/A
  Liberal 273,0566.17+0.411026+5
  Country N/AN/AN/AN/A6+1
  Labor 2,029,75145.88+0.9928286
  Communist 93,5612.11+0.02000
  Lang Labor 60,5491.37+1.37000
  Protestant People's 13,0900.30–0.59000
  Henry George Justice 6,0150.14+0.14000
  Independents 22,5840.51–1.20000
 Total4,424,237  6060

Seats changing hands

SeatPre-1951SwingPost-1951
PartyMemberMarginMarginMemberParty
Australian Capital Territory, ACT  Independent Lewis Nott 3.86.72.9 Jim Fraser Labor 
Ballaarat, Vic  Liberal Alan Pittard 0.41.61.2 Bob Joshua Labor 
Hume, NSW  Country Charles Anderson 1.01.30.3 Arthur Fuller Labor 
Kingston, SA  Liberal Jim Handby 1.63.41.8 Patrick Galvin Labor 
Leichhardt, Qld  Country Tom Gilmore 1.01.30.3 Harry Bruce Labor 
Wannon, Vic  Liberal Dan Mackinnon 0.81.91.1 Don McLeod Labor 

See also

This is a list of members of the Australian Senate from 1951 to 1953. The 28 April 1951 election was a double dissolution called by Prime Minister of Australia Robert Menzies in an attempt to gain control of the Senate and to pass a bill to ban the Communist Party of Australia, if necessary at a joint sitting of both houses. All 121 seats in the House of Representatives, and all 60 seats in the Senate were up for election. The incumbent Liberal Party of Australia led by Menzies with coalition partner the Country Party led by Arthur Fadden defeated the Australian Labor Party led by Ben Chifley and gained control of the Senate with 32 seats to Labor's 28.

Notes

  1. "Parliament of Australia: Senate: Publications: Odgers' Guide to Australian Senate Practice – Twelfth Edition – Chapter 21 – Relations with the House of Representatives – Simultaneous dissolutions of 1951". Aph.gov.au. Archived from the original on 21 March 2011. Retrieved 26 August 2010.

Related Research Articles

Parliament of Australia legislative branch of the Commonwealth of Australia

The Parliament of Australia is the legislative branch of the government of Australia. It consists of three elements: the Crown, the Senate and the House of Representatives. The combination of two elected chambers, in which the members of the Senate represent the states and territories while the members of the House represent electoral divisions according to population, is modelled on the United States Congress. Through both chambers, however, there is a fused executive, drawn from the Westminster system.

Electoral system of Australia

The Australian electoral system comprises the laws and processes used for the election of members of the Australian Parliament. The system presently has a number of distinctive features including compulsory enrolment, compulsory voting, majority-preferential instant-runoff voting in single-member seats to elect the lower house, the House of Representatives, and the use of the single transferable vote proportional representation system to elect the upper house, the Senate.

Double dissolution procedure of dissolving both houses of the Australian Parliament

A double dissolution is a procedure permitted under the Australian Constitution to resolve deadlocks in the bicameral Parliament of Australia between the House of Representatives and the Senate. A double dissolution is the only circumstance in which the entire Senate can be dissolved.

A joint sitting of the Australian parliament was convened in 1974, in which members of the Senate and House of Representatives sat together as a single legislative body. The joint sitting was held on 6 and 7 August 1974, following the double dissolution 1974 federal election, and remains the only time that members of both houses of the federal parliament have sat together as a single legislative body pursuant to section 57 of the Constitution.

1984 Australian federal election

Federal elections were held in Australia on 1 December 1984. All 148 seats in the House of Representatives and 46 of 76 seats in the Senate were up for election. The incumbent Labor Party led by Prime Minister Bob Hawke defeated the opposition Liberal–National coalition, led by Andrew Peacock.

1963 Australian federal election

Federal elections were held in Australia on 30 November 1963. All 122 seats in the House of Representatives were up for election. The incumbent Liberal–Country coalition government, led by Prime Minister Robert Menzies, won an increased majority over the opposition Labor Party, led by Arthur Calwell.

1980 Australian federal election

Federal elections were held in Australia on 18 October 1980. All 125 seats in the House of Representatives and 34 of the 64 seats in the Senate were up for election. The incumbent Liberal–NCP coalition government, led by Prime Minister Malcolm Fraser, was elected to a third term, defeating the opposition Labor Party led by Bill Hayden.

1975 Australian federal election double dissolution election resulting from the 1975 Australian constitutional crisis

Federal elections were held in Australia on 13 December 1975. All 127 seats in the House of Representatives and all 64 seats in the Senate were up for election, due to a double dissolution.

1966 Australian federal election

Federal elections were held in Australia on 26 November 1966. All 124 seats in the House of Representatives were up for election. The incumbent Liberal–Country coalition government, led by Prime Minister Harold Holt, won an increased majority over the opposition Labor Party, led by Arthur Calwell.

1961 Australian federal election

Federal elections were held in Australia on 9 December 1961. All 122 seats in the House of Representatives and 31 of the 60 seats in the Senate were up for election. The incumbent Liberal–Country coalition led by Prime Minister Robert Menzies defeated the opposition Labor Party under Arthur Calwell. In his first election as Labor leader, Calwell significantly reduced the Coalition's margin, gaining 15 seats to leave the government with only a one-seat majority.

1958 Australian federal election

Federal elections were held in Australia on 22 November 1958. All 122 seats in the House of Representatives and 32 of the 60 seats in the Senate were up for election. The incumbent Liberal–Country coalition led by Prime Minister Robert Menzies defeated the opposition Labor Party, led by H. V. Evatt.

1955 Australian federal election

Federal elections were held in Australia on 10 December 1955. All 122 seats in the House of Representatives and 30 of the 60 seats in the Senate were up for election. An early election was called to bring the House and Senate elections back in line; the previous election in 1954 had been House-only. The incumbent Liberal–Country coalition led by Prime Minister Robert Menzies increased its majority over the opposition Labor Party, led by H. V. Evatt.

1954 Australian federal election

Federal elections were held in Australia on 29 May 1954. All 121 seats in the House of Representatives were up for election, but no Senate election took place. The incumbent Liberal–Country coalition led by Prime Minister Robert Menzies defeated the opposition Labor Party led by H. V. Evatt, despite losing the two-party preferred vote.

1949 Australian federal election

Federal elections were held in Australia on 10 December 1949. All 121 seats in the House of Representatives and 42 of the 60 seats in the Senate were up for election. The incumbent Labor Party, led by Prime Minister Ben Chifley, was defeated by the opposition Liberal–Country coalition under Robert Menzies. Menzies became prime minister for a second time, his first term having ended in 1941.

Chifley Government

The Chifley Government was the federal executive government of Australia led by Prime Minister Ben Chifley. It was made up of members of the Australian Labor Party in the Australian Parliament from 1945 to 1949.

2016 Australian federal election Election held on 2 July 2016

The 2016 Australian federal election was a double dissolution election held on Saturday 2 July to elect all 226 members of the 45th Parliament of Australia, after an extended eight-week official campaign period. It was the first double dissolution election since the 1987 election and the first under a new voting system for the Senate that replaced group voting tickets with optional preferential voting.

The history of the Australian Labor Party has its origins in the Labour parties founded in the 1890s in the Australian colonies prior to federation. Labor tradition ascribes the founding of Queensland Labour to a meeting of striking pastoral workers under a ghost gum tree in Barcaldine, Queensland in 1891. The Balmain, New South Wales branch of the party claims to be the oldest in Australia. Labour as a parliamentary party dates from 1891 in New South Wales and South Australia, 1893 in Queensland, and later in the other colonies.

Section 13 of the Constitution of Australia provides for three aspects of the terms of members of the Australian Senate, the timing of elections, the commencement date of their terms and for the Senate to allocate 6 and 3-year terms following a double dissolution of the Parliament of Australia. While member of the House of Representatives have a maximum three-year term, members of the Senate have a fixed 6-year term, subject only to the parliament being dissolved by a double dissolution.

2019 Australian federal election Election for the 46th Parliament of Australia

The 2019 Australian federal election will elect members of the 46th Parliament of Australia. The election will be called following the dissolution or expiry of the 45th Parliament as elected at the 2016 double dissolution federal election.

References