| B-290 Brigadier | |
|---|---|
 | |
| Role | Light transport |
| National origin | United States |
| Manufacturer | Baumann Aircraft Corporation |
| Designer | Jack Boyer Baumann |
| First flight | June 1947 |
| Number built | 2 |
| Developed into | Custer CCW-5 |
The Baumann Brigadier was a prototype American light transport aircraft of the late 1940s. It was a twin-engined monoplane, which, unusually, was of pusher configuration. Only two were built, plans for production never coming to fruition.
Jack Baumann, who had worked for the Taylor Aircraft Company (later to become Piper Aircraft) and Lockheed, [1] [2] set up the Baumann Aircraft Corporation in Pacoima, Los Angeles, California in 1945. [3] His first design for the new company was the B-250 Brigadier, a twin-engined pusher monoplane intended as an executive transport. It was of all-metal construction, with cantilever shoulder mounted wings, and with the pusher engines mounted in nacelles on the wing. An enclosed cabin accommodated a pilot and four passengers, while the aircraft was fitted with a retractable nosewheel undercarriage. [3]
The first prototype, powered by two 125 hp (93 kW) engines (hence the B-250 designation) flew on 20 June 1947. [4] Piper Aircraft was interested in building a tractor version of the Brigadier, and purchased the B-250 prototype and its drawings, designating it the PA-21, [4] [5] with some sources [4] claiming that the B-250 formed the basis of the Piper Apache, although other sources state that Piper abandoned work on the PA-21 and that the Apache was unrelated. [5]
Baumann continued development of the pusher Brigadier, with the second example, the B-290, being fitted with 145 hp (108 kW) Continental C-145 engines but was otherwise similar to the B-250. The B-290, registered N90616, crash-landed at Pacoima on January 8, 1953, heavily damaging the fuselage and injuring pilot Ward C. Vettel and flight engineer Thomas Cox. [6] Production at a rate of one aircraft per month was planned for the B-290. [3] The Brigadier was chosen by Willard Ray Custer as the basis of his Custer CCW-5, which used the fuselage and tail of the Brigadier, but had a modified wing with the engines sitting in U-shaped ducts, [7] but other than the two CCW-5s no production of the B-290 followed. Baumann continued to propose more powerful versions of the Brigadier, but no airframes resulted. [4]
Data from Jane's All The World's Aircraft 1953–54. [3]
General characteristics
Performance
Related development
The Piper PA-32 Cherokee Six is a series of single-engine, fixed landing gear, light aircraft manufactured in the United States by Piper Aircraft between 1965 and 2007.
The Piper PA-23, named Apache and later Aztec, is a four-to-six-seat twin-engined light aircraft aimed at the general aviation market. The United States Navy and military forces in other countries also used it in small numbers. Originally designed in the 1950s by the Stinson Aircraft Company, Piper Aircraft manufactured the Apache and a more powerful version, the Aztec, in the United States from the 1950s to the 1980s.
The Piper PA-24 Comanche is an American four-seat or six-seat, low-wing, all-metal, light aircraft of semimonocoque construction with tricycle retractable landing gear. Piper Aircraft designed and developed the Comanche, which first flew on May 24, 1956. Together with the PA-30 and PA-39 Twin Comanches, it made up the core of the Piper Aircraft lineup until 1972, when the production lines for both aircraft were wiped out in a flood.
The Piper PA-15 Vagabond and PA-17 Vagabond are both two-seat, high-wing, conventional gear light aircraft that were designed for personal use and for flight training and built by Piper Aircraft starting in 1948.
The PA-20 Pacer and PA-22 Tri-Pacer, Caribbean, and Colt are an American family of light strut-braced high-wing monoplane aircraft built by Piper Aircraft from 1949 to 1964.
The Piper PA-18 Super Cub is a two-seat, single-engine monoplane. Introduced in 1949 by Piper Aircraft, it was developed from the Piper PA-11, and traces its lineage back through the J-3 to the Taylor E-2 Cub of the 1930s. In close to 40 years of production, over 10,000 were built. Super Cubs are commonly found in roles such as bush flying, banner towing and glider towing.
The Piper J-5 Cub Cruiser was a larger, more powerful version of the basic Piper J-3 Cub. It was designed just two years after the J-3 Cub, and differed by having a wider fuselage with the pilot sitting in the front seat and two passengers sitting in the rear seat. Equipped with a 75-hp Continental engine the plane's cruising speed was 75 mph. Though officially a three-seater, it would be more accurately described as a "two-and-a-half-seater", as two adults would find themselves quite cramped in the wider rear seat. The Cruiser sold for $1,798 when it was first designed.
The Piper PA-12 Super Cruiser is an American three-seat, high wing, single-engine conventional landing gear-equipped light aircraft that was produced by Piper Aircraft between 1946-48. The PA-12 was an upgraded and redesignated Piper J-5.
The Aquaflight Aqua I, also known as the W-6 was a 6-seat amphibious aircraft developed in the United States shortly after World War II.
The Colonial Model C-1 Skimmer was an American small single-engined amphibian flying boat built by the Colonial Aircraft Corporation. It was the start of a line of very similar aircraft designed by David Thurston.
The Goodyear GA-2 Duck was a 1940s American three-seat light amphibious aircraft built by the Goodyear Aircraft Corporation. The design team included David Thurston, who later developed several other light seaplanes including the Colonial Skimmer, Lake Buccaneer, Thurston Teal and Seafire. Only 19 aircraft were built, and these were used only for testing and as demonstrators.
The Piper PA-6 Sky Sedan was a 1940s American four-seat light aircraft designed and built in prototype form by Piper Aircraft at its Lock Haven, Pennsylvania, factory.
The Ambrosini Rondone is an Italian-designed two/three-seat light touring monoplane of the early 1950s.
The Stout Skycar was a series of four one-off American light aircraft of the 1930s.
The Nord 2100 Norazur was a 1940s French civil transport monoplane designed and built at Courbevoie near Paris by SNCAN.
The Custer CCW-5 was a twin-engined, 5-seat aircraft of pusher configuration, which used a channel wing claimed to enable low speed flight and short take-offs. Two CCW-5s flew, eleven years apart, but the type never entered production.
The Waco Model W Aristocraft was an American four-seat monoplane, the last aircraft designed and built by the Waco Aircraft Company. It had an unusual configuration with an engine mounted at the front driving a pusher propeller at the rear.
The Custer Channel Wing was a series of American-built experimental aircraft designs of the 1940s and 1950s incorporating a half-barrel shaped section to each wing.
The Custer Channel Wing Corporation was an American aircraft manufacturer that specialized in the design of aircraft utilizing the channel wing. The company was active between 1951 and the 1970s.
The Loening SL was an American submarine-based reconnaissance flying boat designed and built by Loening Aeronautical Engineering for the United States Navy.
 | Wikimedia Commons has media related to Baumann Brigadier . |