Bionix AFV

Last updated
Bionix Infantry Fighting Vehicle
Bionix AFV 1.jpg
Bionix II IFV at the 2008 Singapore Airshow.
Type Infantry fighting vehicle
Place of origin Singapore
Service history
In service1997 – present
Used by Singapore Army
Production history
Designer ST Kinetics
Designed1988
Manufacturer ST Kinetics
Produced1996 – present
No. built800 [1]
VariantsSee variants [2]
Specifications
MassCombat weight: 23 tonnes (25 short tons; 23 long tons)
Length5.9 metres (19 ft 4 in)
Width2.7 m (8 ft 10 in)
Height2.6 m (8 ft 6 in)
Crew3 (Commander, Gunner, Driver)
plus 7 combat troops (2 men turret version)
9 combat troops (40/50 version)

Armor MEXAS-M
Main
armament
Bionix 25: M242 Bushmaster 25 mm Cannon
Bionix II: Mk44 Bushmaster II 30 mm Cannon
Secondary
armament
7.62×51mm NATO Commander's MG
7.62×51mm NATO Coaxial MG
7.62×51mm NATO Trooper Compartment Side Mounted GMPG
Engine Detroit Diesel 6V 92TA
475 horsepower (354 kW)
550 hp (410 kW) with Turbo-charge
Power/weight20 hp/tonne
Suspension Hydropneumatic suspension
Operational
range
400 km (250 mi)
Maximum speed 70 km/h (43 mph)

The Bionix (BX) is a family of tracked Singaporean armoured fighting vehicles developed by ST Kinetics (formerly Singapore Technologies Automotive, which is now known as Singapore Technologies Engineering). Intended to augment the Singapore Army's aging M113 armoured personnel carriers, it is the first indigenous armoured vehicle to be developed in Southeast Asia. [3] [4] The Bionix has been operational with the Singapore Armed Forces (SAF) since 1999 in a wide variety of adaptations including the Bionix II, Bionix 25 and Bionix 40/50 variants.

Contents

Aside from domestic use, ST Kinetics has been marketing the Bionix to countries that wish to retire their old M113s from front-line service. [5]

Production History and Development

Along with the growth and development of the Singapore Armed Forces (SAF) during the mid 1980s came a need to bolster (and eventually replace) the existing fleet of M113 Armored Personnel Carriers (APCs). This prompted the Ministry of Defence (MINDEF) to source for a fleet of armored vehicles to operate in tandem with the current fleet of AMX-13 SM1 light tanks.

With the participation of the SAF, the Defence Materiel Organisation (DMO), MINDEF's systems acquisition house, was appointed to conduct a technology study and recommend the direction for the project. A market survey was conducted in which various armored vehicles including the Warrior Tracked Armoured Vehicle, the M2/M3 Bradley Fighting Vehicle, and the Schützenpanzer Marder were evaluated. The findings from the market survey showed that none of the off-the-shelf vehicles met the specific requirements of the SAF. Therefore, the decision was made to develop a vehicle locally. Local development was necessary not only because of a lack of suitable off-the-shelf designs, but also as an opportunity to build up the capability of the local defense industry.

Known as "BIONIX", the IFV was the product of a tripartite team of engineers and technical staff from Singapore Technologies Automotive, DMO and G5 Army, working jointly with HQ Armour to produce a fighting machine tailored to the specific operational requirements of the Army. Key considerations during the design process included high mobility and agility, low weight, amphibious capability, and adequate protection and firepower.

Development of the Bionix began in 1988. It took several years before leaving the prototyping phase in 1995 and finally being commissioned on 26 March 1997. ST Automotive was awarded a S$2.5 billion (US$1.7 billion) contract in March 1997 to supply several hundred Bionix IFVs to the Singapore Armed Forces. The first production vehicles were inducted by the 42nd Battalion, Singapore Armoured Regiment in July 1999. [6]

The Bionix IFV has since been succeeded by the Bionix II, which entered a trial service with the Singapore Armed Forces in 2005 with a Company from 41 SAR. In October 2006, The Bionix II was declared operationally ready with 42 SAR being the first fully equipped Bionix II battalion. [7]

Description

Protection

The hull and turret are of all-welded-steel construction with modular MEXAS passive armour protection. Additional armour protection can be installed with an add-on layer of spaced passive armour.

Engine

The Bionix is a compact design produced to meet the conditions of Pacific rim countries where small size is a great asset when it comes to travelling among rubber plantations and over roads and bridges not designed for heavy vehicles. The power provided by the 475 hp (354 kW) Detroit Diesel engine to drive its 23 tonnes, ensures the Bionix is able to overcome the most difficult terrain. Future upgrades in power ratings can be developed according to needs.

The integrated power pack is mounted to the right of the vehicle and can be removed from the Bionix as a complete unit in under 15 minutes. The engine is coupled to the L-3 Combat Propulsion Systems HMPT-500EC fully hydro mechanical transmission, with the final drives being provided by David Brown Defence Systems. The engine compartment is also fitted with an automatic fire detection and dry-powder fire suppression system with a supplementary manual back up.

Interior

The layout of the Bionix is conventional with the driver at the front left, the power pack situated at the front right and the turret in the center with the troop compartment at the rear. Access to the troop compartment at the rear of the vehicle is by a power-operated ramp, which can operate as an emergency access and exit door. A single hatch is installed over the troop compartment.

The driver enters via a roof hatch that opens to the left rear. When driving closed-down, observation is via three day periscopes, while the center periscope can be rapidly replaced by an image-intensification periscope for driving at night. The driver guides the vehicle using a small steering wheel rather than tillers and, as an automatic transmission is fitted, there are just two pedals - accelerator and brake. The instrument panel is mounted on the left, with the transmission selection box on the right.

In the turret, the gunner's station is on the right and the commander's station is on the left, each with a single hatch cover. The turret traverses through 360°. Traverse and weapon elevation is by all-electric digital control. Both the gunner and commander have a turret stop button and are able to lay and fire the weapons. The gunner has the turret control box mounted to the right of his position and both turret-crew members have an adjustable seat. The communications equipment is installed in the turret bustle.

The basic production models lacks an in-built air conditioning and NBC protection system, but can be fitted if/when needed.

Aiming

The gunner has a twin-control handles and a day/thermal sight, with a magnification of x8 and two fields of view (high and low), with stadias for the 25mm cannon and 7.62mm coaxial machine gun. The commander has an optical relay from the gunner's sight and a single control handle. The vehicle commander has a further five day periscopes to give observation to the turret front, left side and rear; the gunner has three periscopes (1 x M17 and 2 x L794D) to give observation to the right and rear.

Variants

Bionix ARV (Armoured Recovery Vehicle) Bionix ARV.jpg
Bionix ARV (Armoured Recovery Vehicle)
Bionix AVLB (Armoured Vehicle Launched Bridge) Bionix AVLB.jpg
Bionix AVLB (Armoured Vehicle Launched Bridge)
Trailblazer Counter-Mine Vehicle. It is much taller than the rest of Bionix family, to provide protection against mine blasts. NDP2010 Trailblazer CMV 1.jpg
Trailblazer Counter-Mine Vehicle. It is much taller than the rest of Bionix family, to provide protection against mine blasts.

Prototypes

Production models

Operators

Flag of Singapore.svg  Singapore

See also

Comparable AFV/IFVs

Related Research Articles

<span class="mw-page-title-main">BMP-3</span> Infantry fighting vehicle

The BMP-3 is a Soviet and Russian infantry fighting vehicle, successor to the BMP-1 and BMP-2. The abbreviation BMP stands for Boevaya Mashina Pekhoty.

<span class="mw-page-title-main">BMP-2</span> Soviet infantry fighting vehicle

The BMP-2 is an amphibious infantry fighting vehicle introduced in the 1980s in the Soviet Union, following on from the BMP-1 of the 1960s.

<span class="mw-page-title-main">Terrex ICV</span> Armoured combat vehicle

The Terrex Infantry Carrier Vehicle (ICV) is an armoured fighting vehicle (AFV) developed by ST Engineering of Singapore and Timoney Technology of Ireland, and produced by ST Engineering Land Systems for the Singapore Army as well as by Turkish auto-maker Otokar as the Yavuz (AV-82) for the Turkish military.

<span class="mw-page-title-main">Marder (infantry fighting vehicle)</span> German infantry fighting vehicle

The Schützenpanzer Marder 1 is a tracked German infantry fighting vehicle designed for use with the West German Panzergrenadiere units, mechanized infantry specialized for IFV combat. It has been operated by the German Army as the main Panzergrenadiere IFV from 1970s through to the present day. Developed as part of the rebuilding of West Germany's armoured fighting vehicle industry, the Marder has proven to be a successful and solid infantry fighting vehicle design.

<span class="mw-page-title-main">Warrior tracked armoured vehicle</span> Current British infantry fighting vehicle

The Warrior tracked vehicle family is a series of British armoured vehicles, originally developed to replace FV430 series armoured vehicles. The Warrior started life as the MCV-80, "Mechanised Combat Vehicle for the 1980s". One of the requirements of the new vehicle was a top speed able to keep up with the projected new MBT, the MBT-80 – later cancelled and replaced by what became the Challenger 1 – which the FV432 armoured personnel carrier could not. The project was begun in 1972; GKN Defence won the production contract in 1984 and the Warrior was accepted for service with the British Army in November 1984. Production commenced in January 1986 at Telford, with the first vehicles completed in December that year. GKN Defence was purchased by BAE Systems, via Alvis plc.

<span class="mw-page-title-main">Dardo IFV</span> Italian infantry fighting vehicle

The Dardo is an infantry fighting vehicle designed for the Italian Army as a replacement for the M113 APC. It is designed and built by the Iveco Fiat Oto Melara Syndicated Company based in Rome. Iveco is responsible for the hull and propulsion systems, while Oto Melara is responsible for the weapons and fire control systems.

<span class="mw-page-title-main">AMX-10P</span> Infantry fighting vehicle

The AMX-10P is a French amphibious infantry fighting vehicle. It was developed from 1965 onwards to replace the AMX-VCI in the French Army. It served with the French Army from its introduction in 1973 until its retirement in 2015, when it was fully replaced by the VBCI.

<span class="mw-page-title-main">ASCOD</span> Austro-Spanish armoured fighting vehicle

The ASCOD armoured fighting vehicle family is the product of a cooperation agreement between Austrian Steyr-Daimler-Puch AG and Spanish General Dynamics Santa Bárbara Sistemas. The ASCOD family includes the LT 105 light tank equipped with a 105 mm gun, a surface-to-air missile launcher, an anti-tank guided missile launcher, mortar carrier, R&R vehicle, command-and-control vehicle, ambulance, artillery observer, and the AIFV model.

<span class="mw-page-title-main">BTR-90</span> Russian armored personnel carrier

BTR-90 (GAZ-5923) is an 8×8 wheeled armored personnel carrier developed in Russia, designed in 1993 and first shown publicly in 1994. It is a larger version of the BTR-80 vehicle, fitted with a BMP-2 turret.

<span class="mw-page-title-main">FNSS ACV-15</span> Infantry fighting vehicle

ACV-15 is the designation of an amphibious Infantry fighting vehicle family developed by the Turkish defense company FNSS Savunma Sistemleri A.Ş. This vehicle is also manufactured by DRB-HICOM Defence Technologies (DefTech). The design is an attempt to combine the capabilities of an infantry fighting vehicle (IFV) and an armoured personnel carrier (APC). The ACV-15 is based on the American Advanced Infantry Fighting Vehicle, which in turn is based on the American M113A1 armored personnel carrier.

<span class="mw-page-title-main">Puma (German infantry fighting vehicle)</span> German infantry fighting vehicle

The Puma is a German infantry fighting vehicle (IFV) designed to replace the aging Marder IFVs currently in service with the German Army. Production of the first batch of 350 vehicles began in 2010 and was completed in August 2021. A second batch of 229 Pumas received funding. Mass production began on 6 July 2009. The companies responsible for this project are Krauss-Maffei Wegmann and Rheinmetall Landsysteme, which created a joint venture, Projekt System Management GmbH (PSM). The Puma is one of the world's best-protected IFVs, while still having a high power-to-weight ratio.

<span class="mw-page-title-main">K21</span> South Korean infantry fighting vehicle

The K21 is a South Korean infantry fighting vehicle. A replacement for the K200-series, it was formerly designated as K300 or XK21 KNIFV. The initial production began in 2009, with the Republic of Korea Army planning to field approximately 466 units. It is designed to effectively defeat other IFVs as heavily armed and armored as the BMP-3.

A huge number of M113 Armored Personnel Carrier variants have been created, ranging from infantry carriers to nuclear missile carriers. The M113 armored personnel carrier has become one of the most prolific armored vehicles of the second half of the 20th century, and continues to serve with armies around the world in many roles.

<span class="mw-page-title-main">ZBD-04</span> Chinese infantry fighting vehicle

The ZBD-04 or Type 04 is a Chinese infantry fighting vehicle. It bears some external resemblance to the BMP-3, particularly with regards to its turret and main armament; However, the chassis and internal subsystem possesses a different layout. The earliest prototypes received the designation ZBD-97. An improved version, ZBD-04A, is the vehicle currently in service and being produced.

<span class="mw-page-title-main">Mitsubishi Type 89 IFV</span> Japanese infantry fighting vehicle

The Mitsubishi Type 89 IFV(89 FV ) is a Japanese infantry fighting vehicle that entered service with the Japan Ground Self-Defense Force in 1989. There were 58 vehicles in service as of 1999 and a total of 120 produced by 2014 with 300 planned. The main armament of the vehicle is an Oerlikon Contraves 35 millimeter KDE cannon.

<span class="mw-page-title-main">Armour (Singapore Army)</span> Military unit

Armour is the formation of the Singapore Army responsible for armoured warfare. It provides mobile firepower support and rapid mobility for the Army by helping to spearhead an advance past the enemy defences and seizing and holding key objectives on the battlefield. It has four active battalions—the 40th, 41st, 42nd and 48th Battalions, Singapore Armoured Regiment (SAR)—based in Keat Hong Camp and Sungei Gedong Camp, as well as an undisclosed number of reservist battalions.

<span class="mw-page-title-main">Otokar Tulpar</span> Turkish infantry fighting vehicle

Tulpar is a Turkish heavy infantry fighting vehicle designed by the Sakarya-based automotive manufacturer Otokar. It is named after the Tulpar, a winged horse in Turkic mythology.

<span class="mw-page-title-main">ZBD-03</span> Chinese infantry fighting vehicle

The ZBD-03 or Type 03 is a Chinese airborne infantry fighting vehicle. It features a light-weight chassis and hydropneumatic suspension for airborne operations. Early prototypes received the designation ZLC-2000.

<span class="mw-page-title-main">Hunter AFV</span> Singaporean armoured fighting vehicle

The Hunter Armoured Fighting Vehicle is a tracked Singaporean armoured fighting vehicle jointly developed by ST Engineering, Defence Science and Technology Agency, and the Singapore Army. Intended to replace the Singapore Army's aging Ultra M113 armoured personnel carriers, it was commissioned in 2019. It is the Singapore Army's and the world's first fully digitalised platform, and is designed to provide armoured forces with enhanced capabilities to operate more effectively and efficiently in various phases of military operations. It was formerly known as ST Kinetics Next Generation Armoured Fighting Vehicle (NGAFV).

References

Notes
  1. "Singapore Land Forces military equipment and vehicle Singaporean Army" . Retrieved 13 June 2020.
  2. "Specifications: BIONIX family of armoured fighting vehicles" (PDF). ST Kinetics. Archived from the original (PDF) on 2011-09-28. Retrieved 2008-09-29.
  3. "Bionix Infantry Fighting Vehicle". NLB. 2000-12-29. Archived from the original on 2009-03-21. Retrieved 2009-07-15.
  4. Rice, Edmond (April 2006). "AIFVs Spearhead Army Modernisation Plans in Asia". Asian Defence Journal.
  5. "Bionix 40/50 Armored Personnel Carrier". www.military-today.com.
  6. "Bionix AFV Armored Fighting Vehicle". www.militaryfactory.com.
  7. "Singapore studies indigenous 120 mm main battle tank". Jane's International Defence Review . 2004-04-05. Archived from the original on September 27, 2007. Retrieved 2008-09-29.
  8. "Singapore To Buy Refurbished Leopard Tanks From Germany". Agence France-Presse. 2006-11-12. Archived from the original on 2012-12-08. Retrieved 2008-09-29.
  9. "SAF Unveils Battlefield Management System" (PDF). ST Electronics Review. 19 (3). Archived from the original (PDF) on 2007-09-28. Retrieved 2008-09-29.
  10. "Factsheet: BIONIX II : Capabilities and Technical Specifications" (PDF).
  11. "Introduction to Mine Clearing Technology" (PDF). DTA Horizons 2009. Archived from the original (PDF) on 2022-08-06. Retrieved 2020-05-29.
  12. "Singapore Singaporean army land ground forces military equipment armoured armored vehicle UK | Singapore Singaporean army land ground forces UK | Asia UK".
Bibliography