STK 50MG

Last updated

STK 50MG
CIS 50 HMG.jpg
The CIS 50MG on display during Singapore Army open house 2007.
Type Heavy machine gun
Place of originSingapore
Service history
In service1991–present [1]
Used bySee Users
Wars Myanmar conflict
Production history
Designer Chartered Industries of Singapore (CIS, now ST Kinetics) [1] [2]
DesignedMid-1980s [1]
Manufacturer• CIS: 1988–2000 [1]
• ST Kinetics: 2000–present [1]
Produced1988–present [1]
Specifications
Mass30 kg (66.14 lb) (complete gun assembly w/o feed chute and tripod adaptor) [1] [3]
Length1,778 mm (70.0 in) with stock [1]
Barrel  length1,143 mm (45.0 in) [1]
Width190 mm (7.5 in) [3]

Cartridge 12.7×99mm NATO [3]
Calibre 12.7 mm (0.50 in) [1] [3]
BarrelsSingle barrel (progressive RH parabolic twist, 8 grooves) [1]
Action Gas-operated, rotating bolt [1]
Rate of fire 400–600 rounds/min [1]
Muzzle velocity 890 m/s (2,920 ft/s) [1]
Feed systemSingle sprocket Belt-fed with dual-feed chutes [1]
SightsFolding leaf sight [1]

The STK 50 MG, formerly known as the CIS 50MG, [a] is a gas-operated, air-cooled, belt-fed heavy machine gun developed and manufactured by Chartered Industries of Singapore (CIS, now ST Kinetics) in the late 1980s, in response to a request by the Singaporean Defence Ministry to replace the 12.7mm Browning M2HB machine guns then in ubiquitous service with the Singapore Armed Forces (SAF). [2] [4] [5]

Contents

The aim was to have a brand new heavy machine gun design, that fires the same type of .50 cal rounds as the M2HB machine guns and to have the gun parts more readily available in view of easing SAF's chain of logistics and supplies. [1]

Design

Close in defence aboard RSS Resilience US Navy 040526-N-7906B-107 A Republic of Singapore Navy (RSN) gunner assigned to the patrol vessel RSS Resilience, keeps his sight trained on the Military Sealift Command (MSC) combat stores ship USNS Concord (T-AFS 5).jpg
Close in defence aboard RSS Resilience

The CIS engineers learned from the lesson of the canceled (lack of funding) American "Dover Devil GPHMG" program known as the Special Projects Group at Picatinny Arsenal led by Charles J. Rhoades. Curt Johnson and Phil Baker developed the original concept to create a modular weapon suited for modern tactical doctrines and production techniques. [3] In 1988, CIS introduced the new 12.7mm machine gun which was aptly named as the CIS 50MG, after two years of development and testing phase. [2]

As the STK 50 MG is a gas-operated, air-cooled, belt-fed weapon, the gun is operated using dual gas pistons, located in two gas tubes placed on either side of the barrel. The barrel is locked by means of a rotary bolt with multiple radial lugs that engages the barrel extension, eliminating the need for headspace adjustments. The CIS 50MG utilises the same "constant recoil" system used in the Ultimax 100 and it also has a quick-detachable barrel equipped with a carrying handle to facilitate the ease of barrel changing under combat situations or during operational manoeuvres. [2]

Features

The one unique feature of the weapon is its dual belt-feed system, the system allows for fast and easy switching of ammunition from standard ball rounds to the Raufoss Mk 211 Armor-Piercing-Incendiary rounds or the Saboted light armor penetrator (SLAP), which are capable of penetrating a rolled homogeneous armour plate with a thickness of 25 mm (0.98 in) from a range of 1 km (0.62 mi). [2] [3]

Such systems are more commonly used in modern automatic cannons such as the M242 Bushmaster 25mm cannon and the Mk44 Bushmaster II 30mm cannon, both of which are also in use by the Singapore Army's Bionix AFVs. [1]

Users

Map with STK 50 MG users in blue STK 50 MG Users.png
Map with STK 50 MG users in blue

Explanatory notes

  1. Using the Wayback machine on this CIS 50 page indicates that the CIS 50 MG name was used until 2016, when it changed to the STK 50 MG name as seen here.

Related Research Articles

<span class="mw-page-title-main">General-purpose machine gun</span> Machine gun adaptable for several light and medium roles

A general-purpose machine gun (GPMG) is an air-cooled, usually belt-fed machine gun that can be adapted flexibly to various tactical roles for light and medium machine guns. A GPMG typically features a quick-change barrel design calibered for various fully powered cartridges such as the 7.62×51mm NATO, 7.62×54mmR, 7.5×54mm French, 7.5×55mm Swiss and 7.92×57mm Mauser, and be configured for mounting to different stabilizing platforms from bipods and tripods to vehicles, aircraft, boats and fortifications, usually as an infantry support weapon or squad automatic weapon.

The MG 34 is a German recoil-operated air-cooled general-purpose machine gun, first tested in 1929, introduced in 1934, and issued to units in 1936. It introduced an entirely new concept in automatic firepower – the Einheitsmaschinengewehr – and is generally considered the world's first general-purpose machine gun (GPMG). Both the MG 34 and MG 42 were erroneously nicknamed "Spandau" by Allied troops, a carryover from the World War I nickname for the MG 08, which was produced at the Spandau Arsenal.

<span class="mw-page-title-main">Autocannon</span> Rapid-fire projectile weapon that fires armour-piercing or explosive shells

An autocannon, automatic cannon or machine cannon is a fully automatic gun that is capable of rapid-firing large-caliber armour-piercing, explosive or incendiary shells, as opposed to the smaller-caliber kinetic projectiles (bullets) fired by a machine gun. Autocannons have a longer effective range and greater terminal performance than machine guns, due to the use of larger/heavier munitions, but are usually smaller than tank guns, howitzers, field guns, or other artillery. When used on its own, the word "autocannon" typically indicates a non-rotary weapon with a single barrel. When multiple rotating barrels are involved, such a weapon is referred to as a "rotary autocannon" or occasionally "rotary cannon", for short.

<span class="mw-page-title-main">FN MAG</span> General-purpose machine gun

The FN MAG is a Belgian 7.62 mm general-purpose machine gun, designed in the early 1950s at Fabrique Nationale (FN) by Ernest Vervier. It has been used by more than 80 countries and it has been made under licence in several countries, including Argentina, Canada, Egypt, India, and the United Kingdom.

<span class="mw-page-title-main">SAR 21</span> Bullpup assault rifle

The SAR 21 is a bullpup assault rifle designed and manufactured in Singapore, chambered for the 5.56x45mm cartridge. First revealed and subsequently adopted by the Singapore Armed Forces (SAF) as its standard service weapon in 1999, it was designed and developed over a four-year period to replace the locally license-built M16S1 by the Ministry of Defence (MINDEF), Singapore Army and the former Chartered Industries of Singapore (CIS), presently ST Engineering Land Systems.

<span class="mw-page-title-main">Ultimax 100</span> Light machine gun, Squad automatic weapon

The Ultimax 100 is a Singapore-made 5.56mm light machine gun, developed by the Chartered Industries of Singapore by a team of engineers under the guidance of American firearms designer L. James Sullivan. The weapon is extremely accurate due to its constant-recoil operating system and is one of the lightest machine guns in the world.

<span class="mw-page-title-main">ADEN cannon</span> Revolver cannon

The Royal Small Arms Factory ADEN cannon is a 30 mm revolver cannon used on many military aircraft, particularly those of the British Royal Air Force and Fleet Air Arm. Developed post-World War II primarily to meet British Air Ministry's requirement for increased lethality in aircraft armament, the cannon was fired electrically and is fully automatic once it is loaded.

<span class="mw-page-title-main">M39 cannon</span> Single-barrel autocannon

The M39 cannon is a 20 mm caliber single-barreled revolver cannon developed for the United States Air Force in the late 1940s. It was used on a number of fighter aircraft from the early 1950s through the 1980s.

<span class="mw-page-title-main">Gun pod</span> Detachable aircraft weapon mount

A gun pod is a detachable pod or pack containing machine guns, autocannons, revolver cannons, or rotary cannons and ancillaries, mounted externally on a vehicle such as a military aircraft which may or may not also have its own guns.

<span class="mw-page-title-main">M242 Bushmaster</span> American autocannon

The M242 Bushmaster chain gun is a 25 mm (25×137mm) single-barrel chain-driven autocannon. It is used extensively by the U.S. military, such as in the Bradley fighting vehicle, as well as by other NATO members and some other nations in ground combat vehicles and various watercraft. Hughes Helicopters in Culver City, California, was the original designer and manufacturer. As of 2019, Northrop Grumman Innovation Systems produces the gun.

<span class="mw-page-title-main">MG 3 machine gun</span> General-purpose machine gun

The MG 3 is a German general-purpose machine gun chambered for the 7.62×51mm NATO cartridge. The weapon's design is derived from the World War II era MG 42 that fired the 7.92×57mm Mauser round.

<span class="mw-page-title-main">Mk44 Bushmaster II</span> 30 mm chain gun

The Mk44 Bushmaster II is a 30 mm chain gun manufactured by Northrop Grumman. It is a derivative of the 25 mm M242 Bushmaster, and uses 70% of the same parts as the M242 while increasing the firepower by as much as 50% with the 20% increase in caliber size. The barrel is chromium-plated for extended life. The gun uses standard GAU-8 Avenger ammunition that is available in API, HEI and APFSDS-T variants.

<span class="mw-page-title-main">KPV heavy machine gun</span> Heavy machine gun

The KPV heavy machine gun is a Soviet designed 14.5×114mm-caliber heavy machine gun, which first entered service as an infantry weapon in 1949. In the 1960s, the infantry version was taken out of production because it was too large and heavy. It was later redesigned for anti-aircraft use, as it showed excellent results as an AA gun against low flying aircraft, with a range of 3,000 m (9,800 ft) horizontally and 2,000 m (6,600 ft) vertically. It was used in the ZPU series of anti-aircraft guns. Its size and power also made it a useful light anti-armour weapon on the BTR series of vehicles and the BRDM-2 scout car.

ST Engineering Land Systems Ltd (STELS), formerly known as ST Kinetics, is a strategic business area of ST Engineering and handles land systems and specialty vehicles.

The Ameli is a 5.56mm light machine gun designed for the Spanish Army by the nationally owned and operated Centro de Estudios Técnicos de Materiales Especiales (CETME) small arms research institute.

Breda-SAFAT was an Italian weapons manufacturer of the 1930s and 1940s that designed and produced a range of machine-guns and cannon primarily for use in aircraft. Based on the M1919 Browning machine gun, the Italian guns were chambered to fire indigenous ammunition with 7.7 mm (0.303 in) and 12.7 mm (0.500 in) calibres, predominantly ball, tracer for the 7.7mm, including high explosive incendiary tracer (HEI-T), or armour-piercing (AP) for the 12.7mm.

<span class="mw-page-title-main">Shipunov 2A42</span> Soviet autocannon

The Shipunov 2A42 is a Soviet/Russian 30 mm autocannon. It is built by the Tulamashzavod Joint Stock Company and named after A. G. Shipunov.

The SS2 is a replacement for the Pindad SS1 created by Pindad. It had been seen during the ASEAN Army Rifles contest by foreign media in 2006 aside from exposure by local Indonesian media.

<span class="mw-page-title-main">STK 40 AGL</span> Automatic grenade launcher

The STK 40 AGL, formerly the CIS 40 AGL is a 40 mm automatic grenade launcher, developed in the late 1980s and produced by the Singaporean defence firm Chartered Industries of Singapore. The launcher is employed primarily by the Singapore Armed Forces and the police and security forces of several other countries.

<span class="mw-page-title-main">Pindad SPR</span> Sniper rifle (SPR-1/3/4)

The Pindad SPR is a family of sniper rifles made by Pindad. The gun allows the shooter to adjust the height of the position and stability by regulating the bipod of the rifle located on the bottom front of the handguard.

References

Citations

  1. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 Richard J, 2008.
  2. 1 2 3 4 5 "50MG Product Brochure" (PDF). ST Engineering. Archived from the original (PDF) on 19 February 2009. Retrieved 11 September 2008.
  3. 1 2 3 4 5 6 Andrew C, 1989.
  4. "Maximum Firepower: The Machine Guns of the SAF". Singaporean Defence Ministry. 7 June 2008. Archived from the original on 4 August 2012. Retrieved 14 July 2010.
  5. 1 2 3 4 5 "STK 50MG". Military Today. Retrieved 8 July 2021.[ dead link ]
  6. "5 x Patrol Craft BN". Khulna Shipyard. Archived from the original on 5 July 2021. Retrieved 8 July 2021.
  7. "Un repaso a las armas ligeras de Pindad" (in Spanish). ARMAS. Archived from the original on 2 April 2013. Retrieved 5 July 2010.{{cite web}}: CS1 maint: unfit URL (link)
  8. "[Indo Defense 2018] MP5 Clones, 7.62mm Rifles, News from Indonesia's Pindad -". The Firearm Blog. 5 December 2018. Retrieved 6 April 2020.
  9. Binnie, Jeremy; de Cherisey, Erwan (2017). "New-model African armies" (PDF). Jane's. Archived from the original (PDF) on 22 June 2017.
  10. Muhammad Juffry, Bin Joihani (July–August 2009). "PCG upgrades with new fleet and training centre". Police Life Monthly. 35 (7). Singapore: Singapore Police Force. ISSN   0217-8699. Archived from the original on 22 June 2011. Retrieved 10 November 2010.

General and cited references