The FN Minimi (short for French : Mini Mitrailleuse; "mini machine gun") is a Belgian 5.56mm or 7.62mm light machine gun, also classified as a squad automatic weapon developed by Ernest Vervier for FN Herstal. Introduced in the late 1970s, it is in service in more than 75 countries. [14] The weapon is manufactured at the FN facility in Herstal and their U.S. subsidiary FN Manufacturing LLC.
The Minimi fires from an open bolt. It is an air-cooled, gas operated long-stroke piston weapon that is capable of fully automatic fire only. It can be belt fed or fired from a magazine. The Minimi is configured in several variants: the Standard model as a platoon or squad support weapon, the shortened Para version for paratroopers and the Vehicle model as secondary armament for fighting vehicles.
This section needs additional citations for verification .(November 2021) |
The Minimi uses a gas-actuated long-stroke piston system. The barrel is locked with a rotary bolt, equipped with two massive locking lugs, forced into battery by a helical camming guide in the bolt carrier. Upon firing, the piston is forced to the rear by expanding propellant gases bled through a port in the barrel near the muzzle end. The piston rod acts against the bolt carrier, which begins its rearward motion guided on two rails welded to the receiver walls, while the bolt itself remains locked. This sequence provides a slight delay that ensures chamber pressure has dropped to a safe level by the time a cam in the bolt carrier rotates and unlocks the bolt, increasing extraction reliability as the empty cartridge casing has had the time to cool down and contract, exerting less friction against the chamber walls.
The Minimi fires from an open bolt, which reduces the danger of a round cooking off after extended periods of continuous fire, since a cartridge is only momentarily introduced into the chamber prior to ignition, and the movement of the bolt and bolt carrier forces air through the chamber and barrel after each shot, ventilating the barrel and removing heat. Gas escaping the gas cylinder is directed upward, avoiding kicking up dust and debris that would reveal the shooter's position.
The Minimi has a manually adjustable gas valve with two positions, normal and adverse. The adverse setting increases the cyclic rate of fire from 700–850 rounds per minute to 950–1,150 rounds per minute and is used only in extreme environmental conditions or when heavy fouling is present in the weapon's gas tube. The spring extractor is located inside the bolt, while the tilting lever ejector is contained inside the receiver housing. Spent casings are removed through a port located at the bottom of the right side of the receiver, protected from debris with a spring-loaded dust cover. The Minimi is striker-fired and the bolt carrier functions as the striker mechanism.
The Minimi has a push-button type manual safety installed in the trigger housing, above the pistol grip. In the "weapon safe" position, it disables the sear mechanism; pushing the button to the right side exposes a red-coloured rim on the left side of the firearm and indicates the weapon is ready to fire. The black polymer pistol grip from the FAL and FNC rifles was initially used, but the Minimi is currently fitted with a modified grip with lateral grooves, installed at a smaller angle to the receiver.
The Minimi features a welded receiver made from stamped steel. Both the standard and Para variants are equipped with a fixed, folding bipod mounted to the gas tube and stowed under the handguard. The bipod can be adjusted in height and each leg has three height settings. The bipod also offers a 15° range of rotation to either side. With the bipod fully extended, the bore axis is elevated to a height of 465 mm (18.3 in). The Minimi can also be fired from the Belgian FN360° tripod or the American M122 mount using an M60 pintle. The vehicle-mounted Minimi is fitted with an electrically powered trigger that enables it to be fired remotely from within an armoured fighting vehicle.
The standard light machine gun version has a 465 mm (18.3 in) barrel and a skeletonized aluminium stock with a folding wire shoulder strap. The shortened Para model has a 349 mm (13.7 in) barrel and a collapsible metal stock, while the vehicle-mounted model has a 465 mm (18.3 in) barrel but does not have a stock or iron sights. All models can alternatively be fitted with a fixed synthetic stock, the same used on the M249, which contains a hydraulic buffer that contributes to stabilizing the rate of fire and reducing recoil forces. [15]
The weapon is fed from the left-hand side by disintegrating-link M27 ammunition belts (a miniaturized version of the 7.62mm M13 belt), from either an unsupported loose belt, enclosed in a polymer ammunition box with a 200-round capacity attached to the base of the receiver, or from detachable STANAG magazines, used in other NATO 5.56 mm assault rifles such as the M16 and FNC. Magazine feeding is used only as an auxiliary measure, when belted ammunition has been exhausted. The ammunition belt is introduced into the feed tray, magazines are seated inside the magazine port at a 45° angle, located beneath the feed tray port. When a belt is placed in the feed tray it covers the magazine port. Likewise, a magazine inserted into the magazine well will prevent the simultaneous insertion of a belt. The magazine port, when not in use, is closed with an L-shaped hinged flap equipped with a tooth, which engages a corresponding opening in the magazine and serves as a magazine release. This feature was developed by FN's Maurice V. Bourlet and allows the Minimi to be instantly changed from belt feed to magazine feed without any modification. [16]
The pawl-type feeding mechanism is modelled on the system used in the MAG general-purpose machine gun, which was originally used in the World War II-era MG 42. The belt is moved in two stages during both the forward and rearward movement of the reciprocating bolt carrier, which provides for a smooth and continuous feeding cycle. The feeding mechanism top cover features a device that indicates the presence of a cartridge in the feed path.
The barrels used in the Minimi have an increased heat capacity for sustained fire, feature a chrome-lined rifled bore (six right-hand grooves) and are manufactured in two versions: with a 178 mm (1:7 in) twist rate used to stabilize the heavier Belgian 5.56×45mm SS109 projectile, or a 305 mm (1:12 in) twist for use with American M193 ammunition. The barrels have a quick-change capability; a lever is provided on the left side of the weapon that unlocks the barrel allowing the shooter to push it forward removing it from its trunnion. A carrying handle is also fixed to the barrel and assists in the barrel change process. A trained soldier can perform a barrel change and ready the weapon for aimed fire in 6 to 7 seconds. Early models of the Minimi had a flash suppressor with side ports as seen on the FN FAL, FN CAL, and FN FNC rifles; new production guns have a shorter, cone-shaped slotted flash suppressor.
Both the standard and Para models come with a rear sight, adjustable for windage and elevation, that provides a peep aperture for ranges from 300–1,000 m (980–3,280 ft), in 100 m (330 ft) increments. The sight line radius is 490 millimeters (19.3 in). The hooded front sight is installed in a post on the gas block and is also adjustable for elevation and windage. Early models of the Minimi had the rear sight mounted forward of the feed cover and the front post secured to the barrel, closer to the muzzle end. An adapter can also be used that allows the use of standard NATO night and day sights.
Standard equipment supplied with the Minimi consists of three ammunition boxes, a cleaning kit stored inside the forearm, lubricant bottle, sling and blank-firing barrel.
This section needs additional citations for verification .(November 2021) |
The M249 version of the Minimi was adopted by the US military in 1982; since 1984, production for the US military has been carried out entirely in the US by a local subsidiary, FN Manufacturing LLC in South Carolina.
As part of the US military's M249 Product Improvement Program (PIP), the M249 was updated with: a new synthetic stock and modified buffer assembly, a single-position gas regulator, a so-called birdcage type flash hider/compensator from the M16A2, a polymer barrel heat guard, and a folding carry handle. As a result, the weapon's weight increased to 7.47 kg (16.5 lb). Many of the PIP upgrades were later incorporated by FN for the Minimi.
A lightweight variant of the Para with a Picatinny top cover rail adapter is known as the Minimi Special Purpose Weapon (SPW).[ citation needed ] It had the magazine feed port removed to further reduce weight, and a railed MIL-STD-1913 handguard was used that enables the use of standard tactical accessories.
Another variant of the SPW requested by the US Special Operations Forces is the Mk 46 Mod 0 that incorporates a lightweight fluted barrel but lacks the magazine feed system, vehicle mounting lugs and carry handle. A railed forearm ensures modularity and mission-adaptability permitting the use of flashlights, vertical grips, and infrared laser designators. An improved variant known as the Mk 46 Mod 1 with an improved forward rail and lightweight titanium bipod has been adopted by the United States Navy.
The Minimi prototype was originally designed in 7.62×51mm NATO, and later redesigned for the 5.56 mm cartridge. When the USSOCOM issued the requirements for the Mk 48 Mod 0 in the early 2000s, the original plans for the Minimi were retrieved and used to develop this new model. As a result of favourable reviews of the Mk 48 Mod 0 and increasing demand for a more powerful variant of the Minimi, FN Herstal introduced the Minimi 7.62. In November 2006, a FN Herstal press release said the Minimi 7.62 had recently been "launched onto the market" and was available "with a fixed or telescopic buttstock and a standard or triple rail handguard". [18] Apart from the different caliber, the Minimi 7.62 incorporates a non-adjustable, self-regulating gas system and a hydraulic recoil buffer in the buttstock assembly. The Minimi 7.62 also has a different sight setup calibrated for the larger cartridge. The rear sight is adjustable from 300–1,000 m (980–3,280 ft), in 100 m (330 ft) increments. The sight can also be corrected for windage. The Minimi 7.62 TR is a variant equipped with a Picatinny rail handguard from the factory. In Australian service, the Minimi 7.62 is known as the "Maximi". [19]
In November 2013, FN Herstal unveiled the Mk3 version of the Minimi light machine gun the Minimi 5.56 Mk3 and the Minimi 7.62 Mk3. The Mk3 upgrades were based on operational experience and user feedback over the past 10 to 15 years. The stock is 5-position adjustable that is also adjustable for cheek rest height with a folding shoulder rest and hydraulic buffer. The feed tray has retaining pawls to hold ammunition from the belt in place while loading. The handguard has three forward picatinny rails. A new bipod is 3-position height adjustable and seamlessly integrates into the shape of the handguard when folded back regardless of accessories that may be attached. Others features include a more ergonomic cocking handle and an optional heat shield, enabled by an added on long pin, to protect from barrel heat. The Minimi 7.62 Mk3 can be converted to fire 5.56×45mm rounds. Users that already have Minimi machine guns can partially or completely upgrade their existing weapons with the Mk3 features. [20]
The Minimi is being licence-built in Canada, Australia, Italy, Indonesia, Japan, Sweden, Greece and Switzerland by Colt Canada, Lithgow Arms, Beretta, Pindad, Sumitomo Heavy Industries, Bofors Carl Gustaf, and Astra Arms S.A. respectively.
Copies of the Minimi have been produced for export by Norinco and made by Changfeng Machinery Co., Ltd in China without license, designated as CS/LM8 in 2011, and chambered in 5.56×45mm NATO. [21] Another clone, known as the XY 5.56, is made by Yunnan Xiyi Industry Company Limited. [22] This was supposed to be mistaken for the CS/LM8 when news of the weapon was made in 2008. [23] [22]
Taiwan also produced the Minimi without license, as the T75. In addition, Egypt also produces the Minimi under license.
The Minimi has been adopted by over 45 countries. [24] Users include:
The New Zealand Defence Force has selected the FN Herstal 7.62mm Minimi TR as a replacement for the 5.56 mm LSW C9, currently in service. The weapons are being acquired now, with NZ delivery due to start from April this year, and introduction to service and issuing to units planned to occur in last quarter of 2012. The 7.62 LSW Minimi will be issued to certain Army and Air Force Units. This will replace the C9 capability, with priority being given to field force units and regional equipment pools.
FN Herstal has recently been awarded a new contract by the UK Ministry of Defence (MoD) for the supply of up to 176 MINIMI™ 7.62 light machine guns by the end of 2011. The contract also includes optional quantities of a further 250 MINIMI 7.62 machine guns to be delivered annually over a three-year period from 2012 to 2014 should these options be exercised.
A general-purpose machine gun (GPMG) is an air-cooled, usually belt-fed machine gun that can be adapted flexibly to various tactical roles for light and medium machine guns. A GPMG typically features a quick-change barrel design calibered for various fully powered cartridges such as the 7.62×51mm NATO, 7.62×54mmR, 7.5×54mm French, 7.5×55mm Swiss and 7.92×57mm Mauser, and be configured for mounting to different stabilizing platforms from bipods and tripods to vehicles, aircraft, boats and fortifications, usually as an infantry support weapon or squad automatic weapon.
A squad automatic weapon (SAW), also known as a section automatic weapon or light support weapon (LSW), is a man-portable automatic firearm attached to infantry squads or sections as a source of rapid direct firepower. Weapons fulfilling this role can be light machine guns, or modified selective-fire rifles fitted with a heavier barrel, bipod and a belt/drum-fed design.
The FN FAL is a battle rifle designed in Belgium by Dieudonné Saive and manufactured by FN Herstal and others since 1953.
The IWINegev is a 5.56×45mm NATO light machine gun developed by Israel Weapon Industries (IWI), formerly Israel Military Industries Ltd. (IMI).
The M240 machine gun, officially the Machine Gun, 7.62 mm, M240, is the U.S. military designation for the FN MAG, a family of belt-fed, gas-operated medium machine guns that chamber the 7.62×51mm NATO cartridge.
The FN MAG is a Belgian 7.62 mm general-purpose machine gun, designed in the early 1950s at Fabrique Nationale (FN) by Ernest Vervier. It has been used by more than 80 countries and it has been made under licence in several countries, including Argentina, Canada, Egypt, India, and the United Kingdom.
The Ultimax 100 is a Singapore-made 5.56mm light machine gun, developed by the Chartered Industries of Singapore by a team of engineers under the guidance of American firearms designer L. James Sullivan. The weapon is extremely accurate due to its constant-recoil operating system and is one of the lightest machine guns in the world.
The AA-52 is one of the first French-produced guns of the post–World War II era. It was manufactured by the French government-owned Manufacture d'armes de Saint-Étienne (MAS) company. The AA-52 is still used today as a vehicle-mounted weapon due to large quantities in service, but has been replaced in the helicopter role by the Belgian FN MAG, starting with the EC 725 Caracal of the special operations units and the Air Force search and rescue teams. The AA-52 had been largely phased out for infantry use in favour of the lighter FN Minimi but remains in use.
The FNSCAR is a family of gas-operated short-stroke gas piston automatic rifles developed by Belgian manufacturer FN Herstal (FN) in 2004. It is constructed with modularity for the United States Special Operations Command (SOCOM) to satisfy the requirements of the SCAR competition. This family of rifles consists of two main types. The SCAR-L, for "light", is chambered in 5.56×45mm NATO and the SCAR-H, for "heavy", is chambered in 7.62×51mm NATO. Both types are available in Close Quarters Combat (CQC), Standard (STD), and Long Barrel (LB) variants.
The MG 3 is a German general-purpose machine gun chambered for the 7.62×51mm NATO cartridge. The weapon's design is derived from the World War II era MG 42 that fired the 7.92×57mm Mauser round.
The Mark 48, or Mk 48, is a belt-fed general-purpose machine gun chambered for 7.62×51mm NATO cartridges, fed from a disintegrating belt or the non-disintegrating segmented German DM1 belt of ammunition.
The HK21 is a German 7.62 mm general-purpose machine gun, developed in 1961 by small arms manufacturer Heckler & Koch and based on the G3 battle rifle. The weapon is in use with the armed forces of several Asian, African and Latin American countries. It was also license-manufactured by Fábrica de Braço de Prata in Portugal as the m/968 and in Mexico by SEDENA as the MG21. In the German military (Bundeswehr) and the federal police (Bundespolizei) it is designated "G8".
The Daewoo Precision Industries K3 is a South Korean light machine-gun. It is the third indigenous firearm developed in South Korea by the Agency for Defense Development, following the Daewoo Precision Industries K1 assault rifle and Daewoo Precision Industries K2 assault rifle. It is manufactured by Daewoo Precision Industries, current SNT Motiv. The K3 is capable of firing both 5.56×45mm NATO and .223 Remington rounds like the K2 assault rifle. The K3 light machine gun entered service in 1989, replacing the M60 machine gun in frontline use.
The RPD is a 7.62x39mm light machine gun developed in the Soviet Union by Vasily Degtyaryov for the 7.62×39mm M43 intermediate cartridge. It was created as a replacement for the DP machine gun chambered for the 7.62×54mmR round. It is a precursor of most squad automatic weapons. It was succeeded in Soviet service by the RPK.
The FN FNC is a 5.56×45mm NATO assault rifle developed by the Belgian arms manufacturer FN Herstal and introduced in the late 1970s.
The M249 SAW, formally the Light Machine Gun, 5.56 mm, M249, is the United States Armed Forces adaptation of the Belgian FN Minimi, a light machine gun manufactured by FN Herstal (FN).
S&T Motiv K16, formerly known as S&T Motiv K12, is a 7.62×51mm NATO general-purpose machine gun manufactured by S&T Motiv to replace the M60 machine gun for the Republic of Korea Armed Forces. The XK12 was first shown to the public in 2009, during the Seoul ADEX International Aerospace and Defense Exhibition. It was officially designated as K12 during the development stage, but it was re-designated as K16 as the mass production process began in 2021.
The M1919 Browning is a .30 caliber medium machine gun that was widely used during the 20th century, especially during World War II, the Korean War, and the Vietnam War. The M1919 saw service as a light infantry, coaxial, mounted, aircraft, and anti-aircraft machine gun by the U.S and many other countries.
The FN EVOLYS is a light machine gun designed by FN Herstal in 2021, chambered for 5.56×45mm NATO and 7.62×51mm NATO. The EVOLYS was designed to be lighter and more ergonomic than other machine guns, such as the FN Minimi.