BG-7 | |
---|---|
Role | Glider |
National origin | United States |
Manufacturer | Sailplane Corporation of America |
Designer | William G. Briegleb |
First flight | 1940 |
Status | Production completed |
Number built | 3 completed aircraft, 20 kits |
Developed from | Briegleb BG-6 |
The Briegleb BG-7 is an American strut-braced high-wing, single seat glider that was designed by William G. Briegleb and produced by the Sailplane Corporation of America as a completed aircraft and also as a kit. [1] [2]
The BG-7 was a development of the 1939 BG-6, with longer, semi-tapered wings of 40.25 ft (12.3 m) span, compared to the 32.35 ft (9.9 m) wing on the earlier model. [1] [2]
The BG-7 wing is made from wood structure, with two spars and covered in doped aircraft fabric. The wing is supported by dual struts. The fuselage is made from steel tube, again with fabric covering and the tail is metal and fabric. The longer wing created stability issues and many aircraft were subsequently modified by either lengthening the tail to increase the tail arm or enlarging the vertical fin. Cockpit modifications were also common. [1] [2]
Three BG-7s were completed by the factory and a further 20 kits were sold. The type was never certified and most were amateur-built from factory kits. [2] [3] [4]
In 1952 Betsy Woodward Proudfit, flying a BG-7, set the feminine speed record for the 100 km (62 mi) triangle, at 28.64 mph (46.09 km/h). The record stood for eighteen years. [2]
In March 2011 there were still 2 BG-7s on the Federal Aviation Administration register. [4]
Data from Sailplane Directory and Soaring [1] [2]
General characteristics
Performance
The Advanced Aeromarine Sierra was an American high-wing, strut-braced, single-seat, glider that was designed and produced by Advanced Aeromarine, as a kit for amateur construction.
The Schweizer SGS 2-33 is an American two-seat, high-wing, strut-braced, training glider that was built by Schweizer Aircraft of Elmira, New York.
The Briegleb BG-12 is a single-seat sailplane of wooden construction developed in the United States in the 1950s. It was marketed for homebuilding in plans or kit form, with over 350 sets of plans selling by 1978. The BG-12 is a conventional sailplane design, with a high cantilever wing and a conventional empennage. Later models featured a highly revised fuselage, a swept-forward tail fin, and an all flying tailplane with balance tabs.
The Schweizer SGU 1-19 and Schweizer SGU 1-20 are a family of United States single-seat, high-wing, strut-braced, utility gliders built by Schweizer Aircraft of Elmira, New York.
The Schweizer SGU 2-22 is an American two-seat, high-wing, strut-braced, training glider built by Schweizer Aircraft of Elmira, New York.
The Briegleb BG-6 was a 1930s single-seat glider designed by William G. Briegleb to be both factory and homebuilt.
The Laister LP-46 and LP-49 are a family of American high-wing, single-seat, gliders that were designed by Jack Laister and produced by Laister Sailplanes both as kit aircraft and as certified complete aircraft.
The Baker-McMillan Cadet is an American, high-wing, strut-braced, open-cockpit, single-seat glider that was designed in 1929 by Frank R. Gross and produced by Baker-McMillan.
The Scanlan SG-1A is an American, single seat, pod-and-boom, high-wing, strut-braced glider that was designed by Thomas W. Scanlan in 1970 and sold in the form of plans for amateur construction.
The Schreder Airmate HP-11 is an American mid-wing, V-tailed, single seat glider designed by Richard Schreder. Airmate was the name of Schreder's design company.
The Detroit G1 Gull is an American high wing, cable-braced primary glider that was manufactured by the Detroit Aircraft Corporation during the Great Depression.
The Bennett-Carter CBS-1 Dottie S is an American high-wing, strut-braced single-seat glider that was designed by George Bennett and Richard Carter and first flown in 1958.
The Johnson RHJ-6 Adastra was an American mid-wing, two-seat glider that was designed and constructed by Dick Johnson and first flown on 3 April 1960.
The Martin M-1 was an American Gull winged, single-seat glider that was designed and built by Volmer Jensen in 1939.
The FFA Diamant is a family of Swiss high-wing, T-tailed, single-seat, FAI Standard Class and FAI Open Class gliders that was designed by engineering students under supervision of Professor Rauscher at the ETH Zurich and manufactured by Flug- und Fahrzeugwerke Altenrhein AG (FFA) of Altenrhein, Switzerland.
The Midwest MU-1 was an American single-seat, high-wing, strut-braced utility glider that was designed by Arthur B. Schultz in the 1930s.
The Hütter Hü 17, is a German high-wing, strut-braced, single-seat, utility training glider that was designed by brothers Ulrich Hütter and Wolfgang Hütter in the 1930s.
The Schleicher Ka-4 Rhönlerche II, sometimes called the KA-4 or even K 4, is a West German high-wing, strut-braced, two-seat glider that was designed by Rudolf Kaiser and produced by Alexander Schleicher GmbH & Co.
The Schleicher Condor, also referred to as the Dittmar Condor, is a series of German high-wing, single and two-seat, gull winged, gliders that were designed by Heini Dittmar in the 1930s, produced in small quantities before the Second World War, produced again between 1952 and 1955 by Alexander Schleicher GmbH & Co and also by Ferdinand Schmetz.
The Haufe HA-G-1 Buggie is an American high-wing, strut-braced, single-seat, glider that was designed and constructed by Bruno Haufe and Klaus Hill, first flying in 1967.