Operators
| BG-6 | |
|---|---|
| Role | Single-seat Glider |
| National origin | United States |
| Manufacturer | Sailplane Corporation of America |
| Designer | William G Briegleb |
| First flight | 1939 |
| Number built | 9 (+67 kits) |
| Variants | Briegleb BG-7 |
The Briegleb BG-6 was a 1930s single-seat glider designed by William G. Briegleb to be both factory and homebuilt.
The BG-6 is a high-wing single-seat glider with a steel-tube-and-fabric fuselage, wooden wings with fabric covering and a metal-and-fabric tail. The type certificate was approved on 14 September 1940. [1]
Nine gliders were built by Briegleb's company, the Sailplane Corporation of America, and 67 kits were sold to homebuilders. [2] Three factory-built gliders were impressed into service with the United States Army Air Forces in 1942. [3]
National Soaring Museum - In Storage [4]
Data from [2]
General characteristics
Performance
Related lists
The Schweizer SGS 2-33 is an American two-seat, high-wing, strut-braced, training glider that was built by Schweizer Aircraft of Elmira, New York.
The Briegleb BG-12 is a single-seat sailplane of wooden construction developed in the United States in the 1950s. It was marketed for homebuilding in plans or kit form, with over 350 sets of plans selling by 1978. The BG-12 is a conventional sailplane design, with a high cantilever wing and a conventional empennage. Later models featured a highly revised fuselage, a swept-forward tail fin, and an all flying tailplane with balance tabs.
The Stinson Voyager was a 1940s American light utility monoplane built by the Stinson Aircraft Company.
The Funk Model B was a 1930s American two-seat cabin monoplane designed by Howard and Joe Funk. Originally built by the Akron Aircraft Company later renamed Funk Aircraft Company.
The Schneider Grunau Baby was a single-seat sailplane first built in Germany in 1931, with some 6,000 examples constructed in some 20 countries. It was relatively easy to build from plans, it flew well, and the aircraft was strong enough to handle mild aerobatics and the occasional hard landing. When the Baby first appeared, it was accepted wisdom that the pilot should feel as much unimpeded airflow as possible, to better sense rising and falling currents of air and temperature changes etc.
The Schweizer SGS 2-8 is an American two-seat, mid-wing, strut-braced, training glider built by Schweizer Aircraft of Elmira, New York.
The Schweizer SGS 2-12 is a United States two-seat, low-wing, training glider built by Schweizer Aircraft of Elmira, New York.
The Laister-Kauffmann TG-4 was a sailplane produced in the United States during the Second World War for training cargo glider pilots. It was a conventional sailplane design with a fuselage of steel tube construction and wooden wings and tail, covered all over with fabric. The pilot and instructor sat in tandem under a long canopy.
The Schultz ABC was a 1930s American glider designed by Art Schultz.
The Pratt-Read TG-32 was a 1940s American military training glider, designed and built by the Gould Aeronautical Division of the piano manufacturer Pratt, Read & Company of Deep River, Connecticut, for the United States Navy. The Pratt-Read glider was a monoplane glider having a fabric-covered steel tube fuselage and wooden wings and tail. The unique "polywog (tadpole)" shape was the suggestion of aerodynamicist Charles Townsend Ludington, former owner of the Ludington Line.
The Pacific D-8 is an American, single-seat, high-wing glider, that was designed by Ken Coward and made available as plans for amateur construction.
The Franklin PS-2 is an American, high-wing, strut-braced, single seat, glider that was designed by R. E. Franklin and produced by the Franklin Glider Corporation starting in 1930.
The Briegleb BG-7 is an American strut-braced high-wing, single seat glider that was designed by William G. Briegleb and produced by the Sailplane Corporation of America as a completed aircraft and also as a kit.
The Midwest MU-1 was an American single-seat, high-wing, strut-braced utility glider that was designed by Art Schultz in the 1930s.
The Hütter Hü 17, is a German high-wing, strut-braced, single-seat, utility training glider that was designed by brothers Ulrich Hütter and Wolfgang Hütter in the 1930s.
The Warsztaty Szybowcowe Orlik, also known as the Kocjan Orlik after the designer, is a family of Polish gull winged gliders that was designed by Antoni Kocjan and produced by Warsztaty Szybowcowe.
The Bowlus CG-8 was a prototype Second World War American transport glider to be built for United States Army, one was built but the type did not enter production and the programme was cancelled.
The Bowlus CG-7 was a prototype Second World War American transport glider to be built for United States Army, one was built but the type did not enter production and the programme was cancelled.
The Briegleb BG-08 was a 1940s two-seat glider designed by William G. Briegleb.
The Aero Industries TG-31 was a 1940s American military training glider, designed and built by students at the Aero Industries Technical Institute as the Aero Industries G-2 and impressed into military service as the Aero Industries TG-31 '42-57171' on 29 June 1942.