| PS-2 | |
|---|---|
 | |
| Franklin PS-2 training glider is about to be towed aloft by the specially modified car in front. | |
| Role | Glider |
| National origin | United States |
| Manufacturer | Franklin Glider Corporation |
| Designer | R. E. Franklin |
| First flight | 1930 |
| Introduction | 1930 |
| Variants | Stevens SU-1 |
The Franklin PS-2 is an American, high-wing, strut-braced, single seat, glider that was designed by R. E. Franklin and produced by the Franklin Glider Corporation starting in 1930. [1] [2]
The prototype PS-2 was the 50-foot (15 m) wingspan Texaco Eaglet, flown in 1930. The production PS-2 had shorter 36 ft (11.0 m) wings. [1] [2]
The PS-2 is constructed with a steel tube fuselage and a wooden wing, all covered in doped aircraft fabric covering. The wings lack spoilers of other glide-path control devices and are supported by dual, parallel struts. The landing gear is a fixed monowheel and a skid. [1] [2]
The prototype Eaglet performed a number of long tows, including one flown by Frank Hawks from California to Elmira, New York in 1930 [3] and is now in the National Air and Space Museum. [1] [2]
In 1934, the PS-2 was the glider of choice for the Lustig Skytrain experiment. The concept was to tow three gliders in tandem, taking off from New York City and releasing one each over Philadelphia, Baltimore and Washington, D.C. The gliders were piloted by Jack O'Meara, PS-2 designer R.E. Franklin and Stan Smith. The Skytrain was intended to be a proof-of-concept for a future airline service, but was not pursued.
The PS-2 was also used in 1934 for a United States Navy primary flight training experiment in Pensacola, Florida, designed by Ralph Barnaby [1] [2]
The PS-2 was also flown by many early glider pilots including Richard Chichester du Pont, Warren Eaton, Floyd Sweet and Stan Smith. [1] [2]
In 1983, two were reported as being still flown and one was under restoration by the designer's son, Chuck Franklin. [2] The Federal Aviation Administration had seven PS-2s registered in March 2011, including the Franklin-Stevens PS-2. [4]
Data from Sailplane Directory and Soaring [1] [2]
General characteristics
Performance
The Monnett Monerai is a sailplane that was developed in the United States in the late 1970s for homebuilding. It is a conventional pod-and-boom design with a V-tail and a mid-mounted cantilever wing of constant chord.
The Schweizer SGS 2-33 is an American two-seat, high-wing, strut-braced, training glider that was built by Schweizer Aircraft of Elmira, New York.
The Schweizer SGM 2-37 is a two-place, side-by-side, fixed gear, low wing motor glider.
The Schweizer SGS 2-8 is an American two-seat, mid-wing, strut-braced, training glider built by Schweizer Aircraft of Elmira, New York.
The Schweizer SGS 2-12 is a United States two-seat, low-wing, training glider built by Schweizer Aircraft of Elmira, New York.
The Schweizer SGU 1-19 and Schweizer SGU 1-20 are a family of United States single-seat, high-wing, strut-braced, utility gliders built by Schweizer Aircraft of Elmira, New York.
The Schweizer SGU 2-22 is an American two-seat, high-wing, strut-braced, training glider built by Schweizer Aircraft of Elmira, New York.
The Schweizer SGS 1-34 is a United States Standard Class, single-seat, high-wing glider built by Schweizer Aircraft of Elmira, New York.
The Laister-Kauffmann TG-4 was a sailplane produced in the United States during the Second World War for training cargo glider pilots. It was a conventional sailplane design with a fuselage of steel tube construction and wooden wings and tail, covered all over with fabric. The pilot and instructor sat in tandem under a long canopy.
The T.31 Tandem Tutor is a British military training glider, designed and built by Slingsby and used in large numbers by the Air Training Corps between 1951 and 1986.
The Slingsby T.21 is an open-cockpit, side-by-side two-seat glider, built by Slingsby Sailplanes Ltd and first flown in 1944. It was widely used by the Royal Air Force, Sri Lanka Air Force and by civilian gliding clubs.
The Scanlan SG-1A is an American, single seat, pod-and-boom, high-wing, strut-braced glider that was designed by Thomas W. Scanlan in 1970 and sold in the form of plans for amateur construction.
The Stevens SU-1 is an American single seat, high-wing, strut-braced, glider that was designed in 1933 by students at the Stevens Institute of Technology in Hoboken, New Jersey.
The Bartos/Nobel BN-1 Phantom is an American, two-seat, mid-wing glider designed by Gene Bartos in the late 1960s.
The Johnson RHJ-6 Adastra was an American mid-wing, two-seat glider that was designed and constructed by Dick Johnson and first flown on 3 April 1960.
The Kennedy K-W is an American high-wing, strut-braced, single-seat glider that was designed by Harold Kennedy of Dodge City, Kansas, with assistance from Floyd Watson. The aircraft is notable for being assembled from certified powered aircraft components and also for having had an in-flight break-up.
The Luenger Beta 1 was an American high-wing, single-seat, T-tailed FAI Open Class glider designed by Hans Luenger and Spud Kohler.
The Midwest MU-1 was an American single-seat, high-wing, strut-braced utility glider that was designed by Arthur B. Schultz in the 1930s.
The Warsztaty Szybowcowe Orlik, also known as the Kocjan Orlik after the designer, is a family of Polish gull winged gliders that was designed by Antoni Kocjan and produced by Warsztaty Szybowcowe.
The Bowlus SP-1 Paperwing was an American high-wing cantilever monoplane, single-seat, glider that was designed in 1928 and completed by William Hawley Bowlus on January 1, 1929. The SP-1 was Bowlus' sixteenth glider, and was test flown at Lindbergh Field in San Diego in January, 1929. Later tests were also made from hillsides near Bonita, California in April, 1929. SP-1 received identification mark "493" from the United States Department of Commerce and was one of the first licensed gliders in the United States. Many refer to the Bowlus SP-1 as the first sailplane of U.S. design and construction.
 | Wikimedia Commons has media related to Franklin PS-2 . |