SGM 2-37 | |
---|---|
USAFA TG-7A | |
Role | Motor glider |
National origin | United States |
Manufacturer | Schweizer Aircraft Corporation |
Designer | Leslie Schweizer [1] |
First flight | 1982 |
Introduction | 1982 |
Retired | USAF service: April 2003 [2] Still in civil use |
Primary users | United States Air Force Academy United States Coast Guard |
Produced | 1982–1988 |
Number built | 12 [1] |
Developed from | Schweizer SGS 1-36 Sprite and 2-32 |
Variants | Schweizer RU-38 Twin Condor |
The Schweizer SGM 2-37 is a two-place, side-by-side, fixed gear, low wing motor glider. [1] [3]
A total of twelve were produced between 1982 and 1988, including nine for the United States Air Force Academy, which designated it the TG-7A. The TG-7A was retired from USAFA service in April 2003. [1] [2] [4]
The basic airframe was later developed into the SA 2-37A and B covert surveillance aircraft. [5]
Schweizer had flown a Schweizer SGU 1-19 as a motor glider in 1946 without putting the design into production. In 1958 the company carried out a design study of a powered aircraft using the wings and tail of the 1-26 designated as the Schweizer SA 1-30, but after some test flying and modification it was not put into production. A two-seat version of the 1-30, the Schweizer SA 2-31 was completed in 1960 but not put into production due to competition in the light aircraft market. Both the 1-30 and 2-31 were designed as regular light aircraft and no further motorgliders were built by the company until 1982. [6] [7] [8] [9] [10]
The SGM 2-37 was designed at the request of the USAF for use at USAFA, in both the powered and glider trainer role. [3]
To save both money and development time the aircraft used a number of existing aircraft components:
The design was intended to be available as a civil aircraft as well as a military aircraft. The USAF version was delivered with a Lycoming O-235-L2C 4-cylinder aircraft engine of 112 hp (84 kW). The civil version offered the same engine or an option of a Lycoming O-320 of 150 hp (112 kW) or a Lycoming O-360 of 180 hp (134 kW). [2] [3]
The aircraft is of all-metal aluminum monocoque construction. The engine cowling is made from fiberglass and plastics are employed in some of the nonstructural components. [2]
The 2-37 features a 27 cu ft (760 L) baggage compartment behind the side-by-side seating. The aircraft does not have flaps, but instead has top-and-bottom wing-mounted balanced divebrakes, similar to other Schweizer glider designs. [3]
Performance includes a cruise speed of 114 mph while burning 4 US gal per hour with the O-235 engine. The 17.9 aspect ratio wing provides a glide ratio of 28:1 with the propeller feathered, and a minimum sink speed of 3.16 feet/sec (0.96 m/s). [1] [3] The USAF Technical Orders indicate a glide ratio of between 19.3:1 and 19.7:1. [11]
The SGS 2-37 was marketed by the company as being suitable for the following roles: [1] [3]
The 2-37 was later developed into the SA 3-38, known in military service as the Schweizer RU-38 Twin Condor.
The SGM 2-37 was certified by the Federal Aviation Administration under type certificate G1NE on 22 March 1983. The 2-37 type certificate is currently held by K & L Soaring of Cayuta, New York. K & L Soaring now provides all parts and support for the Schweizer line of sailplanes. [12] [13]
Soaring, the journal of the Soaring Society of America, described the SGM 2-37 as: "Very versatile, very promising, very expensive". The publication's review noted that the $70,000 base price did not include a feathering propeller, gyro instruments, wheel fairings, long range fuel tanks, or other optional extras. [3]
Examples of the TG-7 were used by the US Army from 1985 on covert surveillance duties under the Grisly Hunter project. The two aircraft were then transferred to the US Coast Guard by mid 1989, were modified and were re-designated RG-8A. The aircraft were used on coastal patrols from the US Coast Guard base at Miami wearing a grey low visibility color scheme, as shown in the adjacent image taken in 1989. [14]
There were nine aircraft still registered in the US in April 2008. Current owners include the Tuskegee Airmen National Historical Museum and designer Leslie E. Schweizer. [15]
Data from Sailplane Directory, [1] USAFA, [2] Soaring magazine November 1983 [3] & FAA Aircraft Type Certificate G1NE [12]
General characteristics
Performance
Related development
Aircraft of comparable role, configuration, and era
Related lists
The Schweizer Aircraft Corporation was an American manufacturer of sailplanes, agricultural aircraft and helicopters located in Horseheads, New York. It was incorporated in 1939 by three Schweizer brothers, who built their first glider, the SGP 1-1, in 1930. Previously the oldest privately owned aircraft company in the United States, Schweizer was acquired by Sikorsky Aircraft Corporation of Stratford, Connecticut in 2004, and became a diversified aerospace company. Schweizer Aircraft ceased operations in 2012. It was sold to Schweizer R.S.G. in 2018 and production lines were opened again in Fort Worth, Texas. The company was producing three helicopter models in 2021.
The X-26 Frigate is the longest-lived of the X-plane programs. The program included the X-26A Frigate sailplane and the motorized X-26B Quiet Thruster versions: QT-2, QT-2PC, and QT-2PCII. All were based on the Schweizer SGS 2-32 sailplane.
The National Soaring Museum (NSM) is an aviation museum whose stated aim is to preserve the history of motorless flight. It is located on top of Harris Hill near Elmira, New York, United States.
The Schweizer SGS 2-33 is an American two-seat, high-wing, strut-braced, training glider that was built by Schweizer Aircraft of Elmira, New York.
The Schweizer SGS 1-26 is a United States One-Design, single-seat, mid-wing glider built by Schweizer Aircraft of Elmira, New York.
The Schweizer SGS 1-23 is a United States Open and Standard Class, single-seat, mid-wing glider built by Schweizer Aircraft of Elmira, New York.
The Schweizer SGS 2-8 is an American two-seat, mid-wing, strut-braced, training glider built by Schweizer Aircraft of Elmira, New York.
The Schweizer SGS 2-12 is a United States two-seat, low-wing, training glider built by Schweizer Aircraft of Elmira, New York.
The Schweizer SGU 1-19 and Schweizer SGU 1-20 are a family of United States single-seat, high-wing, strut-braced, utility gliders built by Schweizer Aircraft of Elmira, New York.
The Schweizer SGS 1-21 is a United States single-seat, mid-wing, Open Class glider built by Schweizer Aircraft of Elmira, New York.
The Schweizer SGU 2-22 is an American two-seat, high-wing, strut-braced, training glider built by Schweizer Aircraft of Elmira, New York.
The Schweizer SGS 1-24, also referred to as the Schweizer-Burr SGS 1-24, is a United States single-seat, mid-wing, Open Class competition glider built by Howard Burr and Schweizer Aircraft of Elmira, New York.
The Schweizer SGS 1-34 is a United States Standard Class, single-seat, high-wing glider built by Schweizer Aircraft of Elmira, New York.
The Schweizer SGS 2-25 is a United States two-seat, mid-wing, two-place competition glider built by Schweizer Aircraft of Elmira, New York.
The Schweizer SGS 1-29 is an American single-seat, mid-wing, experimental laminar flow airfoil glider built by Schweizer Aircraft of Elmira, New York.
The Schweizer SGS 2-32 is an American two-seat, mid-wing, two or three-place glider built by Schweizer Aircraft of Elmira, New York.
The Schweizer SGS 1-35 is a United States 15 Meter Class, single-seat, mid-wing glider built by Schweizer Aircraft of Elmira, New York.
The Schweizer SGS 1-36 Sprite is a United States, single-seat, mid-wing glider built by Schweizer Aircraft of Elmira, New York.
The Schweizer RU-38 Twin Condor is a two or three-seat, fixed gear, low wing, twin boom covert reconnaissance aircraft.
The Leffler-MacFarlane LM-1 is an American mid-wing, single-seat, FAI Open Class glider that was designed and constructed by Al Leffler, Walt MacFarlane and Bill Meyer, first flying in November 1963.
Wikimedia Commons has media related to Schweizer SGM 2-37 . |