Schweizer SGU 1-19

Last updated

SGU 1-19 and SGU 1-20
Role Open-class sailplane
National originUnited States
Manufacturer Schweizer Aircraft Corporation
Designer Ernest Schweizer
First flight1944 [1]
Number built50

The Schweizer SGU 1-19 and Schweizer SGU 1-20 are a family of United States single-seat, high-wing, strut-braced, utility gliders built by Schweizer Aircraft of Elmira, New York. [1] [2]

Contents

The 1-19 was a 1944 development of the pre-war SGU 1-7 and bears a strong resemblance to the earlier craft. It was designed for single place training and soaring flights. [1] [3]

The 1-20 was an improved version of the 1-19 with a wingspan of 43 feet (13 m) replacing the 36-foot (11 m) wing on the 1-19. [1] [3]

Background

Schweizer Aircraft had produced the SGS 2-8 and SGS 2-12 training gliders for the US military as well as producing many aircraft parts under subcontract for the war effort. As the Second World War was drawing to a close the company decided to continue to make gliding part of their business plan. [2]

Many economic forecasts had predicted a post war aviation boom, with thousands of military trained airmen returning home to the US to fly civil aircraft. Like many aircraft manufacturers Schweizer planned to produce new aircraft for the boom. [2]

Once the war had ended the availability of cheap military surplus gliders severely limited the market for sales of new gliders. By the summer of 1948 it was obvious that the boom was not going to occur and this left manufacturers with surplus inventory of powered light aircraft and, in the case of Schweizer, gliders. [2]

Development

With production of the SGS 2-8 and SGS 2-12 military training gliders complete in 1944, Schweizer Aircraft did studies of a series of utility and sailplane designs, trying to determine what would best suit the post-war market. Design studies conducted in this period included: [1] [4]

None of these designs proceeded to the stage of constructing a prototype. [1] [4]

Schweizer Aircraft decided to concentrate on two designs, both based on the utility glider layout of the Schweizer SGU 1-7. The single place version was the 1-19 and the two place was designated as the SGU 2-22, both designed by Ernest Schweizer. [2] [3]

1-19

The 1-19 first flew in 1944 and was quickly ordered by Schweizer's 15 US dealers in large numbers for use as a trainer. Fifty were completed. [2]

Construction of the constant chord 1-19 wing was of wood and fabric. It utilized a two spar, double strutted design. The fuselage and tail were made from welded tube covered with aircraft fabric. The 1-19 was originally produced with an open cockpit, but in service most were modified with the addition of canopies. [3] The 1-19 is very light, with an empty weight of just 320 lb (150 kg), but it is complex to assemble and disassemble as this requires use of many small pins. [1]

1-20

Designer Ernest Schweizer quickly identified a need for a version of the 1-19 with better performance and designed a new set of wings for it. The new aircraft, with an additional seven feet of span, was designated the SGU 1-20. The additional wingspan brought the glide ratio up to 18.5:1 from the 1-19's 16:1. A single factory-built 1-20 was completed, NX-91840. Two additional 1-20's were created by private owners who converted their 1-19 by replacing their stock wings with the longer wing. [2] [5]

The wings were made available as kits and a number of 1-19s were converted to 1-20s. [2] [5]

Motorized 1-19

In 1946 the company experimented with a motorglider conversion of the 1-19. This was attempted because the company had acquired a used Andover engine that produced 12 horsepower (9 kW) at 4000 rpm. A 1-19 was modified by bolting the engine in pusher configuration over the wing/fuselage junction. The installation was completed with a home-made propeller. [6]

The resulting aircraft displayed disappointing performance. The combination of the low-performance 1-19 and the low-power engine left the aircraft unable to climb out of ground effect. It had a ceiling of ten feet. [6]

During one flight Schweizer test pilot Frank Hurtt was able to find a thermal at ten feet and climbed the aircraft up to 2,000 feet (610 m). Other than one flight where the aircraft was auto-towed with the engine running at full throttle, this was the only time that the altitude achieved exceeded ten feet. [6]

After complaints were received from the airport manager, the 1-19 was converted back to a glider and the project terminated. [6]

The company finally produced a successful motorglider with the Schweizer SGM 2-37, which was first flown in 1982 and of which 12 examples were produced. [7]

Certification

The 1-19 received type certificate G-17 on 19 June 1946. [8] The type certificate is currently held by K & L Soaring of Cayuta, New York. K & L Soaring now provides all parts and support for the Schweizer line of sailplanes. [8] [9]

The 1-20 was never certified in the US and these aircraft are flown there as experimental aircraft. [1] The SGU 1-20 was issued Canadian type certificate G-53 1960-10-27 in the name of Cu Nim Gliding Club of Calgary. [10]

Variants

SGU 1-19
The basic factory produced model was designated as the SGU 1-19. [1] [8]
SGU 1-19A
SGU 1-19s assembled from factory kits were accepted as certified aircraft and were designated as SGU 1-19A. They were otherwise identical to the 1-19. [1] [8]
SGM 1-19
The factory converted one SGU 1-19 to a self-launching motorglider and temporarily designated it as the SGM 1-19 ("M" for "motor"). The project was not a success and the aircraft was de-modified. [1] [4] [6]
SGU 1-20
The 1-20 is the long winged version of the 1-19. One 1-20 was completed and a number of 1-19s were converted to 1-20s by installing longer wings. [1] [5]

Competitions & Records

Distance flying in the 1-19 is challenging, given its 16:1 glide ratio and red-line speed limit of just 75 mph (122 km/h). Jim Hard flew an SGU 1-19 190 miles (308 km) to qualify for a Gold distance and Diamond goal flight. [1]

The prototype 1-20 was soared 138 miles (222 km) by Paul A. Schweizer in 1947. [1] [5]

In service

In May 2008 there were still 25 SGU 1-19s registered in the USA along with one 1-19A [11] and three 1-20s, the factory prototype (serial number 1), and two converted 1-19s. [12]

Aircraft on display

Specifications (1-19)

Data from Jane's all the World's Aircraft 1947 [15]

General characteristics

Performance

See also

Related lists

Related Research Articles

Schweizer Aircraft

The Schweizer Aircraft Corporation was an American manufacturer of sailplanes, agricultural aircraft and helicopters located in Horseheads, New York. It was incorporated in 1939 by three Schweizer brothers, who built their first glider, the SGP 1-1, in 1930. Previously the oldest privately owned aircraft company in the United States, Schweizer was acquired by Sikorsky Aircraft Corporation of Stratford, Connecticut in 2004, and became a diversified aerospace company. Schweizer Aircraft ceased operations in 2012. It was sold to Schweizer R.S.G. in 2018 and production lines were opened again in Fort Worth, Texas. The company was producing three helicopter models in 2021.

ICA IS-29

The ICA IS-29 was a sailplane built in Romania in the 1970s. The prefix IS comes from Iosif Șilimon, the Romanian IAR aeronautical engineer who designed it.

Schweizer SGS 2-33

The Schweizer SGS 2-33 is an American two-seat, high-wing, strut-braced, training glider that was built by Schweizer Aircraft of Elmira, New York.

Schweizer SGS 1-26

The Schweizer SGS 1-26 is a United States One-Design, single-seat, mid-wing glider built by Schweizer Aircraft of Elmira, New York.

Schweizer SGS 1-23

The Schweizer SGS 1-23 is a United States Open and Standard Class, single-seat, mid-wing glider built by Schweizer Aircraft of Elmira, New York.

Schweizer SGM 2-37 US touring motor glider, 1982

The Schweizer SGM 2-37 is a two-place, side-by-side, fixed gear, low wing motor glider.

Schweizer SGU 1-6

The Schweizer SGU 1-6 was a United States Open Class, single-seat, high-wing, pod-and-boom glider built by Schweizer Metal Aircraft Company of Elmira, New York.

Schweizer SGU 1-7

The Schweizer SGU 1-7 is an American Open Class, single-seat, high-wing strut braced glider built by Schweizer Metal Aircraft Company of Elmira, New York.

Schweizer SGS 2-8

The Schweizer SGS 2-8 is an American two-seat, mid-wing, strut-braced, training glider built by Schweizer Aircraft of Elmira, New York.

Schweizer SGS 2-12

The Schweizer SGS 2-12 is a United States two-seat, low-wing, training glider built by Schweizer Aircraft of Elmira, New York.

Schweizer SGU 2-22

The Schweizer SGU 2-22 is an American two-seat, high-wing, strut-braced, training glider built by Schweizer Aircraft of Elmira, New York.

Schweizer SGS 1-24

The Schweizer SGS 1-24, also referred to as the Schweizer-Burr SGS 1-24, is a United States single-seat, mid-wing, Open Class competition glider built by Howard Burr and Schweizer Aircraft of Elmira, New York.

Schweizer SGS 1-34

The Schweizer SGS 1-34 is a United States Standard Class, single-seat, high-wing glider built by Schweizer Aircraft of Elmira, New York.

Schweizer SGS 2-25

The Schweizer SGS 2-25 is a United States two-seat, mid-wing, two-place competition glider built by Schweizer Aircraft of Elmira, New York.

Schweizer SGS 1-29

The Schweizer SGS 1-29 is an American single-seat, mid-wing, experimental laminar flow airfoil glider built by Schweizer Aircraft of Elmira, New York.

Schweizer SGS 2-32

The Schweizer SGS 2-32 is an American two-seat, mid-wing, two or three-place glider built by Schweizer Aircraft of Elmira, New York.

Schweizer SGS 1-35

The Schweizer SGS 1-35 is a United States 15 Meter Class, single-seat, mid-wing glider built by Schweizer Aircraft of Elmira, New York.

Schweizer SGS 1-36 Sprite

The Schweizer SGS 1-36 Sprite is a United States, single-seat, mid-wing glider built by Schweizer Aircraft of Elmira, New York.

Scheibe Bergfalke

The Scheibe Bergfalke is a German glider designed by Egon Scheibe as a post-World War II development of the Akaflieg München Mü13 produced before and during the war.

The Schweizer SA 1-30 was the first entry by Schweizer in the powered aircraft market.

References

  1. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 Said, Bob: 1983 Sailplane Directory, Soaring Magazine, page 27. Soaring Society of America, November 1983. USPS 499-920
  2. 1 2 3 4 5 6 7 8 Schweizer, Paul A: Wings Like Eagles, The Story of Soaring in the United States, pages 96-108. Smithsonian Institution Press, 1988. ISBN   0-87474-828-3
  3. 1 2 3 4 5 Activate Media (2006). "SGU 1-19 Schweizer". Archived from the original on August 25, 2002. Retrieved May 19, 2008.
  4. 1 2 3 4 5 6 Smithsonian Institution (2004). "Directory of Airplanes" . Retrieved May 3, 2008.
  5. 1 2 3 4 Activate Media (2006). "SGU 1-20 Schweizer". Archived from the original on August 8, 2007. Retrieved May 19, 2008.
  6. 1 2 3 4 5 Schweizer, Paul A: Wings Like Eagles, The Story of Soaring in the United States, page 120. Smithsonian Institution Press, 1988. ISBN   0-87474-828-3
  7. Activate Media (2006). "SGM 2-37 Schweizer". Archived from the original on August 8, 2007. Retrieved April 29, 2008.
  8. 1 2 3 4 Federal Aviation Administration (September 2007). "TYPE CERTIFICATE DATA SHEET NO. G-17" . Retrieved May 19, 2008.
  9. K & L Soaring (n.d.). "K & L Soaring, LLC" . Retrieved May 19, 2008.
  10. Transport Canada (October 27, 1960). "Canadian Civil Aircraft Type Approval" . Retrieved October 10, 2019.
  11. Federal Aviation Administration (May 2008). "FAA Registry" . Retrieved May 19, 2008.
  12. Federal Aviation Administration (May 2008). "FAA Registry" . Retrieved May 19, 2008.
  13. "Vintage Aircraft". Archived from the original on April 9, 2011. Retrieved April 1, 2011.
  14. Munson, J. (n.d.). "Sailplanes in Our Collection". Archived from the original on May 16, 2011. Retrieved May 19, 2008.
  15. Bridgman, Leonard, ed. (1947). Jane's all the World's Aircraft 1947. London: Sampson Low, Marston & Co. p. 289c.