| CB-16 | |
|---|---|
 | |
| Role | Passenger aircraft |
| National origin | United States of America |
| Manufacturer | Burnelli |
| Designer | Vincent Burnelli |
| First flight | 8 January 1929 [1] |
| Number built | 1 [2] |
The Burnelli CB-16, also known as the Uppercu-Burnelli CB-300, was a passenger aircraft designed by the American company Burnelli in 1928. It was the first twin-engined aircraft to have retractable landing gear. [2] Only one was built.
The CB-16 was built for and financed by Paul W. Chapman, chairman of Sky Lines Inc. in 1928, following the success of the Burnelli RB-2.
The CB-16 was a twin-engined high-wing monoplane, constructed of metal. The slightly tapered wing was braced from the lower fuselage by pairs of parallel struts. The fuselage was 36 ft (11 m) long and 12 ft (3.7 m wide) wide externally, with an airfoil cross section. As with the earlier RB-1 and RB-2, the twin engines were embedded within the leading edge of the fuselage though, unlike them, the rest of this surface was largely filled with radiators. To reduce yaw after an engine failure, the 500 hp (370 kW) water cooled Curtiss Conqueror inline engines were mounted with slight toe out. The internal dimensions of the cabin, which could seat 12-20 passengers, were 18 ft (5.49 m) by 11 ft 4 in (3.45 m) long, with a height of 5 ft 6 in (1.71 m). This provided both seating and lounge space. At the rear of the cabin there was a small kitchen and toilets. The pilots sat in open cockpits placed at the wing leading edge. [1] [3]
Earlier Burnelli lifting body designs had fuselages which were rectangular in plan, with the empennage directly attached, but the CB-16's fuselage tapered and the tail unit was mounted beyond the lifting body's trailing edge on a pair of thin panels extending from its sides. The alteration was motivated by the difficulties of pitch and yaw control encountered with the earlier arrangement. The panels swept upwards into a pair of fins and balanced rudders carrying a high set tailplane with three balanced elevators, the rudders working between them. The single wheels of the still novel retracting undercarriage were mounted on V-struts hinged at the lower, outer fuselage, retracting inwards. [1]
The completed aircraft was shipped to Newark, New Jersey. In January 1929 Leigh Wade piloted the aircraft on a 40-minute test flight. [1] Further tests were then conducted at Curtiss Field at Long Island and Bolling Field in Washington. In 1929, during a test, the CB-16 stalled and crashed at takeoff, though the two pilots survived. [2]
Data fromFlight, 1929 [1]
General characteristics
Performance
The Fokker F.V was a Dutch airliner created by Fokker in the 1920s. The most interesting property of the F.V was that it could be configured either as a biplane or a monoplane, as the lower wing could be removed. It was not a success and only one was built.
The Burnelli UB-14, also known as the Cunliffe-Owen Clyde Clipper, was a 1930s American prototype lifting-fuselage airliner designed and built by Vincent Burnelli.
The Latécoère 350 was a trimotor development of the Latécoère 28, a successful single-engined French monoplane of around 1930. The three engines were intended to provide the reliability needed for overnight flights, but the 350 came out very overweight. Only one was built.
The Junkers J 15 was an all-metal monoplane built in Germany in 1920 to explore the design parameters of small single-engined passenger transports. In particular, it could fly in either high or low wing configurations. It led to the Junkers J 16 light airliner.
The ICA IS-23 was a single-engined high-wing monoplane with STOL capability that was built in Romania in the 1960s. It was developed into the similar ICA IS-24.
The Dyle et Bacalan DB-10 was a heavy night bomber, designed in France and flown in 1926. It was a twin engine, high wing, metal frame monoplane, distinguished by a very thick centre section wing which formed the forward fuselage and housed the engines.
The SAB AB-20 was a large four engine twin boom French bomber built in the early 1930s as a development of the Dyle et Bacalan DB-70 airliner. It featured a lifting body of thick airfoil section between the inner engines. It was later modified for the attack role; a second aircraft, the AB-21, had different engines and cleaner aerodynamics but no more were built.
The Burnelli RB-1 was a US twin engine biplane airliner prototype from 1920, incorporating a lifting body fuselage.
The Emsco B-2 Challenger was a US three-engined, six passenger aircraft flown in 1929. Only two were built and they were quite soon converted into two different Emsco types, one with one engine and the other with two.
The Invincible D-D was a prototype three/four seat touring aircraft, built in the US in 1929. One example flew but development was ended by the Great Depression.
The Albert A-20 was a French twin-engined monoplane designed for postal work in 1929. Only one was built.
The Brown 1926 parasol monoplane was a 1920s US, three seat, parasol wing civil aircraft developed from a biplane wartime scout. It was intended for either the private or commercial passenger markets, though one was used as a crop-duster.
The Burnelli UB-20 was a prototype lifting body airliner designed by Vincent Burnelli and built in the early 1930s.
The Simplex Red Arrow was a US single-engined monoplane produced in the late 1920s and early 1930s and intended as club machine or mail transport. Most used radial engines in the 90–110 hp (67–82 kW) range. They carried one or two passengers whose seats could be open or enclosed. One variant, the Red Arrow Dual Plane, was easily converted from monoplane to biplane and was available with two versions of the much more powerful Wright Whirlwind engines. In all about 20 were built.
The 1929 Curtiss Model 53 Condor, also known as the Curtiss Model 53 Condor 18 or the Curtiss CO Condor, was a civil passenger version of the Model 52 Condor bomber. A twin-engined biplane, it carried 18 passengers.
The McMullen Mac Airliner was a late 1920s American light airliner powered by a Liberty L-12 V-12 engine of World War I origin. The sole prototype was destroyed in a hangar fire.
The Wallace Touroplane was a late 1920s U.S. three seat, high wing cabin monoplane. About 20 were built.
The Zenith Albatross Z-12 was a large, three-engined airliner built in the United States in 1928. It could carry up to 11 passengers. Only one was completed.
The Waterman Flex-Wing was a four seat cabin aircraft designed to be easy for non-expert pilots to fly. Its principle safety features were based on a hinged wing providing controllable and interconnected dihedral and incidence. Two were built but the absence of funding in the difficult trading conditions of the Great Depression ended the project.
The sole Kawanishi K-2 was the first specialized Japanese racing aircraft. The advanced, Junkers-influenced, single seat monoplane's first flight was in the late summer of 1921. It had a promisingly high maximum speed but a career limited by numerous minor accidents produced no victories or records.
 | Wikimedia Commons has media related to Burnelli CB-16 . |
|title= (help)