CVV 5 Papero

Last updated
Papero
RoleSingle seat glider
National origin Italy
ManufacturerCentro Volo a Vela, Milan (CVV)
DesignerErmenegildo Preti
First flight1939
Number built4
Developed from CVV 4 Pellicano

The CVV 5 Papero (English: Gosling ) was a single seat competition glider designed and built in Italy in the late 1930s, a development of the CVV 4 Pellicano.

Contents

Design and development

The Papero was designed at the Centro Volo a Vela (CVV), or Experimental Soaring Centre, of the Royal Polytechnic of Milan by Gildo Preti, the fourth and last in a series of gull winged, single seat, competition gliders. Built in 1939, it had much in common with the CVV 4 Pellicano, first flown earlier in that year. [1] This is particularly so of the wings, which share dimension, layout and plan. Each wing was double straight tapered, with semi-elliptical tips and built around a single spar with a ply covered torsion D-box ahead of it and fabric behind. The centre section panels had strong dihedral but the outer wing none, forming the gull wing. There were ailerons occupying all the outer panel trailing edges and airbrakes at mid chord at the outer ends of the centre section which extended both above and below the wing. These limited the Papero to speeds less than its 180 km/h (112 mph) design limit. [1]

Whilst both aircraft had ovoid section, ply covered fuselages, that of the Papero was improved, particularly ahead of the wings, by seating the pilot lower and reducing the cross section. He sat under a canopy, which, together with a small section of fuselage, was removed for access. The undercarriage was improved by lightening the skid and including a fixed, semi-recessed monowheel. Both models had a horizontal tail mounted on a shallow pedestal slightly above the upper fuselage and forward of the rudder hinge, though the elevators of the Papero were reshaped and carried a small trim tab. Both had narrow fins and broad, curved rudders but that of the Papero was unbalanced. The rear control surfaces were fabric covered. [1]

The Papero prototype, I-MCVV, first flew in 1939. Three more were built by Costruzione Aeronautiche Taliedo. It had a slightly better glide angle than the Pellicano and competitive with the best sailplanes of its time, even with those of greater span. [1]

Operational history

At least one Papero flew for a time with a Matricola Militare serial. [2]

Specifications

Data from Italian Vintage Sailplanes [1]

General characteristics

Performance

Related Research Articles

<span class="mw-page-title-main">Slingsby Skylark 4</span> British competition glider, 1961

The Slingsby T.50 Skylark 4 was a British single seat competition glider built by Slingsby Sailplanes in the early 1960s. It sold in numbers and had success at national, though not world level competition.

The Kirigamine Mita is a training glider, seating two in tandem, designed in Japan in the early 1960s. A modified version, first flown in 1966, was produced in modest numbers.

<span class="mw-page-title-main">Maeda 703</span> Type of aircraft

The Maeda 703 was one of the first indigenous Japanese gliders, a high performance single seat aircraft which first flew in 1940. Three were built, two with gull wing wings; one of these set a national endurance record in 1941.

<span class="mw-page-title-main">CVV-6 Canguro</span> Type of aircraft

The CVV-6 Canguro was a high performance two seat glider, designed at Milan Polytechnic University in 1940. A small batch was ordered for the Italian Air Force but few were delivered; more were produced after World War II, becoming the most common Italian gliding club machine. Some were still in use in the 1980s. In 1954 a Canguro came second at the World Gliding Championships at Camphill Great Hucklow, Derbyshire, England. One was modified into a powered aircraft, at first with a piston engine and later with a turbojet.

<span class="mw-page-title-main">CVV-4 Pellicano</span> Type of aircraft

The CVV-4 Pellicano was a single seat Italian glider designed for a competition to select an aircraft for the 1940 Olympic Games. The DFS Olympia Meise was preferred to it after the trials in Italy in 1939.

The CVV1 Pinguino was a single seat, high performance glider designed and built in Italy in the mid-1930s, the first of a series of gliders from the Milan Polytechnic. It did not go into production.

The CVV 2 Asiago is a simple, single seat glider designed and built in Italy in the mid-1930s, the second of a series of gliders from the Milan Polytechnic and the first go into production.

The CVV 3 Arcore was a single seat competition glider designed and built in Italy in the late 1930s, a development of the CVV 1 Pinguino. It participated in several national gliding competitions in the short period before the outbreak of World War II.

The CVV 7 Pinocchio was a single seat competition glider designed and built in Italy, first flown in 1952 though designed in 1940. Only one was built.

<span class="mw-page-title-main">CVV 8 Bonaventura</span> Type of aircraft

The CVV 8 Bonaventura was a two-seat competition glider designed and built in Italy during the 1950s. Fifteen were produced.

The Aeronautica Lombarda AL-3 was an Italian sailplane, designed and built in 1939 to take part in the Olympic sailplane competition. It did so but was not successful.

The CVT1 Zigilo was a single-seat, 12-metre-span (39 ft) Italian training glider designed and built in Italy in the 1950s. Only one was completed.

The Teichfuss Sparviero was an Italian single seat aerobatic glider, designed by Luigi Teichfuss and flown in 1938.

The IIL IS-5 was a single seat, high performance sailplane designed by Iosif Șilimon and built in Romania in 1960.

The IIL IS-7 was a two-seat, sailplane designed by Iosif Șilimon and built in Romania in the late 1950s. Only one prototype was built.

The IIL IS-8 was a two-seat sailplane designed by Iosif Șilimon and built in Romania in 1960. They served with Romanian gliding clubs.

The IIL IS-10 was a high-performance, single-seat glider, designed and built in Romania in the early 1960s. It was the first Romanian aircraft to use laminar flow airfoils.

The Merville SM.31 is a French high performance glider with a laminar flow wing, first flown in 1960. Only one was built.

<span class="mw-page-title-main">Oberlerchner Mg 19</span> Type of aircraft

The Oberlerchner Mg 19 Steinadler is an Erwin Musger designed two seat tandem trainer glider built in Austria and first flown in 1951. Several examples of this successful aircraft, which competed in the two seat class at two World Gliding Championships in the 1950s, were still flying in 2000.

The Jancsó-Szokolay M22 was a Hungarian single-seat sailplane first flown in 1937. Twenty were built and the type set several national records. Some remained in service up to about 1953.

References

  1. 1 2 3 4 5 Pedrielli, Vincenzo; Camastra, Francesco (2011). Italian Vintage Sailplanes. Königswinter: EQIP Werbung & Verlag GmbH. pp. 111, 124–5. ISBN   978-3-9808838-9-4.
  2. ↑ "Italian pre-war register". Archived from the original on 2012-04-01. Retrieved 29 November 2012.
  3. ↑ Lednicer, David. "The Incomplete Guide to Airfoil Usage". m-selig.ae.illinois.edu. Retrieved 16 April 2019.
  4. ↑ "Notes on the Situation of Gliding in Italy". The Sailplane. 18 (5): 107–8. May 1950.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.