Callender-Hamilton bridge

Last updated
The Alexis River Bridge, Labrador is a Callender-Hamilton type bridge TRANS - LABRADOR HIGHWAY BRIDGE, PORT HOPE 26TH JULY 2002 Hope Simpson Off The Beaten Path Pritchard.jpg
The Alexis River Bridge, Labrador is a Callender-Hamilton type bridge

The Callender-Hamilton bridge is a modular portable pre-fabricated truss bridge. It is primarily designed for use as permanent civil bridging as well as for emergency bridge replacement and for construction by military engineering units. Assembling a Callender-Hamilton bridge takes much longer than the more familiar Bailey bridge as it is made up of individual lengths of galvanised steel bolted together with galvanised high-strength steel bolts, all of which require torque settings. It is stronger and simpler in design concept than the Bailey bridge.

Contents

History

The Callender-Hamilton bridge system was designed by New Zealand civil engineer A. M. Hamilton, and patented by him in 1935. The system is currently fabricated by Painter Brothers, Hereford, operating within the Balfour Beatty Power Networks Division [1] formerly British Insulated Callender's Cables.

Hamilton's bridge concept was inspired by his work between 1928 and 1932 as principal engineer on the 'Hamilton Road' through Iraqi Kurdistan. He described the building of this road in his book Road Through Kurdistan: Travels in Northern Iraq, 1937. Hamilton became aware of the need for strong, adaptable bridges made from simple components that could easily be transported and erected in remote locations or on difficult terrain. Hamilton was awarded £4,000 in 1936 by the War Office for the use of his early bridges and the Royal Commission on Awards to Inventors awarded him £10,000 in 1954 for the partial breach of his patent by the design of the Bailey bridge. [2]

Design

The Callender-Hamilton bridge system is a prefabricated Panel/Floor Beam/Deck system designed to span bridging lengths ranging from 30 to 150 metres with road widths of one to three or more lanes. The design uses Warren trusses and is centred on a series of gusset plates that allow the direct attachment of the longitudinal, diagonal, vertical, and cross framing members. Centralised connection points increase the speed of construction and allow identical panels to be fabricated from identical members and then installed on site. An important feature is that all connections are bolted, so removing the need for onsite welding.

The bridge is usually built on falsework. A reinforced concrete deck is then superimposed on, and acts compositely with, the fabricated steel truss deck, thereby eliminating the use of scaffolding. A steel orthotropic deck, steel open grate deck or a timber deck are alternatives to a concrete deck. As with the Bailey bridge, an enhanced feature of the Callender-Hamilton bridge is that it can be assembled entirely on one side of a gap and with a removable launching nose added then be projected on rollers to the other side. [3]

All bridge elements are small enough to be transported by road and site operations can be carried out without skilled labour, special plant or heavy equipment. Because of the modular design, repairs are as structurally efficient as the original construction and at the end of service dismantled bridges can be reduced to initial components for reuse. Salvability is high due to the hot-dip galvanisation of each individual component.

Examples of Callender-Hamilton bridges in use

Callender-Hamilton bridge, 4th Walton bridge WaltonBridge.jpg
Callender-Hamilton bridge, 4th Walton bridge

See also

Related Research Articles

<span class="mw-page-title-main">Bailey bridge</span> Type of portable truss bridge

A Bailey bridge is a type of portable, pre-fabricated, truss bridge. It was developed in 1940–1941 by the British for military use during the Second World War and saw extensive use by British, Canadian and American military engineering units. A Bailey bridge has the advantages of requiring no special tools or heavy equipment to assemble. The wood and steel bridge elements were small and light enough to be carried in trucks and lifted into place by hand, without the use of a crane. The bridges were strong enough to carry tanks. Bailey bridges continue to be used extensively in civil engineering construction projects and to provide temporary crossings for pedestrian and vehicle traffic.

<span class="mw-page-title-main">Truss</span> Rigid structure that consists of two-force members only

A truss is an assembly of members such as beams, connected by nodes, that creates a rigid structure.

<span class="mw-page-title-main">A. M. Hamilton</span> New Zealand civil engineer

Archibald Milne Hamilton (1898–1972) was a New Zealand civil engineer, notable for building the Hamilton Road through Kurdistan and designing the Callender-Hamilton bridge system, and the Callendar-Hamilton aeroplane shed of the late 1930s.

<span class="mw-page-title-main">Truss bridge</span> Bridge whose load-bearing superstructure is composed of a truss

A truss bridge is a bridge whose load-bearing superstructure is composed of a truss, a structure of connected elements, usually forming triangular units. The connected elements, typically straight, may be stressed from tension, compression, or sometimes both in response to dynamic loads. There are several types of truss bridges, including some with simple designs that were among the first bridges designed in the 19th and early 20th centuries. A truss bridge is economical to construct primarily because it uses materials efficiently.

<span class="mw-page-title-main">Westham Island Bridge</span> Bridge in Delta, British Columbia, Canada

The Westham Island Bridge, which is a single-lane, wood-deck truss bridge over Canoe Pass near the mouth of the Fraser River, connects Westham Island with the Delta mainland, in Metro Vancouver.

<span class="mw-page-title-main">Hampden Bridge, Kangaroo Valley</span> Bridge in New South Wales, Australia

Hampden Bridge is a heritage-listed single-span suspension bridge that carries Moss Vale Road (B73) across the Kangaroo River, in Kangaroo Valley, in the City of Shoalhaven local government area of New South Wales, Australia. The bridge was designed by Ernest de Burgh and built by Loveridge and Hudson. The property is owned by Transport for NSW. It was added to the New South Wales State Heritage Register on 2 August 2019.

<span class="mw-page-title-main">M5 (Cape Town)</span> Metropolitan route in the City of Cape Town, South Africa

The M5 is an expressway in the City of Cape Town Metropolitan Municipality, South Africa. It connects Milnerton on the Western Seaboard in the north to Muizenberg in the south, and crosses both the N1 and the N2. For part of its length, from the N1 interchange to Plumstead, it is a limited-access freeway (motorway). From Mowbray to Muizenberg it is parallel to the M4 Main Road.

<span class="mw-page-title-main">Girder bridge</span> Bridge built of girders placed on bridge abutments and foundation piers

A girder bridge is a bridge that uses girders as the means of supporting its deck. The two most common types of modern steel girder bridges are plate and box.

<span class="mw-page-title-main">Helix Bridge</span> Pedestrian bridge in Singapore

The Helix Bridge, officially The Helix, and previously known as the Double Helix Bridge, is a pedestrian bridge linking Marina Centre with Marina South in the Marina Bay area in Singapore. It was officially opened on 24 April 2010; however, only half was opened due to ongoing construction at the Marina Bay Sands. The bridge was fully opened on 18 July.

<span class="mw-page-title-main">Tal-y-Cafn</span> Human settlement in Wales

Tal-y-Cafn is a small settlement in Conwy county borough, north Wales, in the community of Eglwysbach.

<span class="mw-page-title-main">Canalside Rail Trail Bridge</span> Bridge in Massachusetts, USA

The Canalside Rail Trail Bridge is a former New York, New Haven and Hartford Railroad rail bridge across the Connecticut River between Deerfield and Montague, Massachusetts. The bridge is on the Massachusetts Historic Bridge Inventory as a "Historic Metal Truss Bridge", currently the sixth oldest metal truss bridge on the state-wide historic registry. The Canalside Rail Trail, completed in Spring 2008, incorporates this bridge.

<span class="mw-page-title-main">Mabey Logistic Support Bridge</span>

The Mabey Logistic Support Bridge is a portable pre-fabricated truss bridge, designed for use by military engineering units to upgrade routes for heavier traffic, replace civilian bridges damaged by enemy action or floods etc., replace assault and general support bridges and to provide a long span floating bridge capability. The bridge is a variant of the Mabey Compact 200 bridge, with alterations made to suit the military user as well as a ramp system to provide ground clearance to civilian and military vehicles.

<span class="mw-page-title-main">Peats Ferry Bridge</span> Bridge in New South Wales, Australia

The Peats Ferry Bridge is a steel truss bridge that carries the Pacific Highway (B83) across the Hawkesbury River, between Kangaroo Point and Mooney Mooney Point, located 40 kilometres (25 mi) north of Sydney in New South Wales, Australia. The bridge carries the Hornsby to Kariong section of highway, while the adjacent Brooklyn Bridge carries the Pacific Motorway (M1).

Painter Brothers is a major British fabricator of structural steelwork and one of the leading producers of bolted lattice steelwork in the world.

<span class="mw-page-title-main">Old US 41–Backwater Creek Bridge</span> United States historic place

The Old US 41–Backwater Creek Bridge is a bridge located on an abandoned section of US Highway 41 (US 41) over Backwater Creek in Baraga Township, Michigan. It was listed on the National Register of Historic Places in 1999.

<span class="mw-page-title-main">Bethanga Bridge</span> Bridge in Victoria, Australia

The Bethanga Bridge is a steel truss road bridge that carries the Riverina Highway across Lake Hume, an artificial lake on the Murray River in Australia. The dual heritage-listed bridge crosses the border between the Australian states of New South Wales and Victoria, linking the Victorian towns of Bellbridge and Bethanga with the regional New South Wales city of Albury.

McMillans Bridge, is a riveted wrought iron open web truss bridge, located over the Woady Yaloak River on the Rokewood-Skipton Road between Rokewood and Werneth on a historical route between Geelong and the 1850s goldfields at Ararat and Streatham.

<span class="mw-page-title-main">Medburyville Bridge</span> United States historic place

The Medburyville Bridge is a historic bridge in Wilmington, Vermont. It is a steel Warren through bridge, built in 1896 across the Deerfield River, just south of Vermont Route 9 roughly midway between the centers of Wilmington and Searsburg. It stands just upstream of the Woods Road bridge, which functionally replaced it in 1985. The bridge was listed on the National Register of Historic Places in 1990; as it has no decking, it is closed to all forms of traffic.

<span class="mw-page-title-main">Bridge 12</span> United States historic place

Bridge 12 is a historic Parker through truss bridge, carrying Boston Post Road across the Missisquoi River in Enosburg, Vermont. Built in 1929 in the wake of Vermont's devastating 1927 floods, it is one a shrinking number of surviving truss bridges on the river. It was listed on the National Register of Historic Places in 2007.

<span class="mw-page-title-main">Gates of Haast</span> Gorge in New Zealand

The Gates of Haast is a gorge on the Haast River in Mount Aspiring National Park in the South Island of New Zealand. It is located 56 kilometres (35 mi) inland by road from the township of Haast and 9 kilometres (5.6 mi) from the summit of Haast Pass. The Gates of Haast has sheer rock cliffs above a steep cascade in the Haast River. State Highway 6 crosses the gorge on a single-lane Callender-Hamilton steel truss bridge.

References

  1. "Company Profile". Painter Brothers. Retrieved 2013-06-13.
  2. "Bridge Claim By General "Used As Basis For Bailey Design"". The Times. 26 July 1955. p. 4 col E.
  3. 1 2 "Bridges on the Trans Labrador Highway" (PDF).
  4. "Archived copy" (PDF). Archived from the original (PDF) on 2011-09-02. Retrieved 2011-02-11.{{cite web}}: CS1 maint: archived copy as title (link)
  5. "Rechercher". Dday-overlord.forumactif.com. Retrieved 2013-06-13.
  6. "TNC On Tour Summer 2007 Page 29". Tuesdaynightclub.co.uk. 2007-07-19. Retrieved 2013-06-13.
  7. 1 2 3 "ACROW Limited of Canada: Callender-Hamilton Bridges- Vehicular, Beam, Heavy-Haul, Callender-Hamilton, Railroad and Moveable Bridges". www.acrowcanada.com. Archived from the original on June 27, 2009.
  8. "The Story of a Callender-Hamilton Bridge Demolished after 63 years".
  9. "Ehzerbrug (Almen, 1946)". Structurae. Retrieved 2021-07-27.
  10. "Cumbria – Places – Langwathby Bridge". BBC. 2008-04-28. Retrieved 2013-06-13.
  11. "Tal-y-Cafn Bridge in North Wales". Painter Brothers. Archived from the original on 2012-03-24. Retrieved 2013-06-13.
  12. "Rotten timber delays work on Two Fords Bridge". Dorset For You. 2009-07-07. Archived from the original on 2009-07-12.
  13. "Medieval bridge – old mill – Vernon". www.vernon-visite.org. Archived from the original on January 5, 2010.
  14. "Walton Bridge – The fourth bridge". Archived from the original on 2009-12-05. Retrieved 2009-12-14.
  15. "Pont du Mandrare (1958-2012) – Madagascar – Androy" via www.youtube.com.