 | This article needs additional citations for verification .(November 2018) |
The Caterpillar D5 is a small track-type bulldozer manufactured by Caterpillar Inc. The original D5 series was only produced in 1939. [1] The current D5 series being produced is the D5K.
Over the years, Caterpillar often built different series of D5s at the same time, often with a lighter version having more in common with the smaller D3 and D4 tractors, and a larger version more akin to the much larger D6.[ citation needed ] Usually, the differentiation had to do with whether the machine incorporated an elevated or high sprocket drive. And later, this also determined the type of transmission used, with the smaller series using a hydrostatic drive and the larger version typically having a Power-Shift transmission.[ citation needed ] These varying series have created some confusion with lineage, as the letter designation does not always correspond to when the model of machine was introduced. For example, the D5H came out years before the D5C. Caterpillar has now turned to a straight number designation (no letters) for all of its new track-laying tractors — starting, for the first time, with the D-1 and going all the way up to the D-11, with consistent size and weight breaks between each model. This new designation has now put the current D5's weight at close to 43,000 pounds (20,000 kg). This is a considerable increase over any previous D5 models. The heavier, elevated versions of these could weigh 34,000 pounds (15,000 kg). At most, or as little as 20,000–25,000 pounds (9,100–11,300 kg). For some of the lighter series, such as the D5C. Consequently, the all-new D5 is much larger than any of the earlier versions.[ citation needed ]
Continuous track or tracked treads are a system of vehicle propulsion used in tracked vehicles, running on a continuous band of treads or track plates driven by two or more wheels. The large surface area of the tracks distributes the weight of the vehicle better than steel or rubber tyres on an equivalent vehicle, enabling continuous tracked vehicles to traverse soft ground with less likelihood of becoming stuck due to sinking.
The Caterpillar D9 is a large track-type tractor designed and manufactured by Caterpillar Inc. It is usually sold as a bulldozer equipped with a detachable large blade and a rear ripper attachment.
A bulldozer or dozer is a large, motorized machine equipped with a metal blade to the front for pushing material: soil, sand, snow, rubble, or rock during construction work. It travels most commonly on continuous tracks, though specialized models riding on large off-road tires are also produced. Its most popular accessory is a ripper, a large hook-like device mounted singly or in multiples in the rear to loosen dense materials.
Heavy equipment, heavy machinery, earthmovers, construction vehicles, or construction equipment, refers to heavy-duty vehicles specially designed to execute construction tasks, most frequently involving earthwork operations or other large construction tasks. Heavy equipment usually comprises five equipment systems: the implement, traction, structure, power train, and control/information.
The Caterpillar D11T is a large bulldozer, manufactured by Caterpillar Inc. in East Peoria, Illinois, and mainly used in the mining industry. Primarily designed as a bulldozer, it is also used for push-loading scrapers, and ripping rock overburden.
The Caterpillar D6 track-type tractor is a medium bulldozer manufactured by Caterpillar Inc. with a nominal operating weight of 18 short tons (16 t). The military versions were classified as the SNL G152 medium tractor, under the G-numbers classification system used for army tractors.
The Audi S8 is a full-size luxury car of the Audi S models produced by the German automaker Audi AG, manufactured by Audi Sport GmbH at the Neckarsulm plant. The S8 is the mechanically-upgraded, high-performance version of the Audi A8, fitted standard with Audi's quattro all-wheel drive system, and was only offered with a short-wheelbase for the first three generations, being joined by a long-wheelbase variant option for the fourth generation.
The Caterpillar 740 Ejector Articulated Truck is Caterpillar's second generation of articulated haulers to have a system that pushes material out the back of the body. It is the largest articulated haul truck offered by Caterpillar; larger trucks use a rigid frame system. The ejector uses a 4-cylinder hydraulic ram and blade to dump the material out, a similar system to Cat's wheel tractor-scrapers. The 740 Ejector is sold as separate model from the usual 740.
The Caterpillar D10 is a track-type tractor manufactured by Caterpillar Inc.. It was the first modern tractor to use the elevated drive sprocket to improve durability, operator comfort, and ease of maintenance.
The Cessna 421 Golden Eagle is an American six or seven seat twin-engined light transport aircraft, developed in the 1960s by Cessna as a pressurized version of the earlier Cessna 411.
The Caterpillar D7 is a medium track-type tractor manufactured by Caterpillar Inc. and most commonly used as a bulldozer.
The Volvo D5 is a type of turbocharged diesel engine developed by Volvo Cars for use in its passenger cars. The D5 engine is based on the Volvo Modular diesel engine. The D5 displaces 2.4 liters; a smaller series of two-litre engines were developed in 2010 and marketed as the Volvo D3 and D4.
The Caterpillar D8 is a medium track-type tractor designed and manufactured by Caterpillar. Though it comes in many configurations, it is usually sold as a bulldozer equipped with a detachable large blade and a rear ripper attachment.
The International TranStar, is a range of Class 8 trucks produced by Navistar International for North America. Produced nearly exclusively as a semitractor, the product range is focused towards local delivery and regional shipping.
The M39 series 5-ton 6×6 truck (G744) was a family of heavy tactical trucks built for the United States Armed Forces. The basic cargo version was designed to transport a 5-ton (4,500 kg), 14 ft (4.3 m) long load over all terrain in all weather. In on-road service the load weight was doubled.
The Ford L-series is a range of commercial trucks that were assembled and marketed by Ford between 1970 and 1998. They are also known as Ford Louisville or, for the 1990s aerodynamic models, Ford Aeromax. The first dedicated Class 8 truck produced by the company, although Ford had been producing "Heavy Duty" trucks since 1948 and their "Super Duty" lineup since 1958. The L-Series was the successor of the F-900/F-1000 Super Duty and the Ford N-Series. The line encompassed a wide range of models in GVWR Classes 6 through 8, as either straight trucks or as semi-tractors, with vehicles developed for medium-duty, on-highway, severe-service, and vocational applications.
The Caterpillar D4 track-type tractor is a small bulldozer manufactured by Caterpillar Inc.
Traxcavator was a namebrand of the Trackson Company of Milwaukee, Wisconsin. The word "Traxcavator" came from combining "tractor" and "excavator".
Prior to and during the second world war the US Army called several tractors M1 Medium Tractor. Under the Ordnance Corps these "off the shelf" tractors were meant to tow artillery pieces, so were not equipped with blades like their Engineer counterparts. Eventually these were replaced by purpose built "High Speed Tractors" (HST). Some tractors were equipped with crane attachments for ammunition, and material handling.
Prior to and during World War II the United States Army called several tractors M1 Light Tractor. Under the Ordnance Corps these commercial off-the-shelf tractors were meant to tow artillery pieces so were not equipped with blades like their Engineer counterparts. Eventually these were replaced by purpose built "High Speed Tractors" (HST). Some tractors were equipped with crane attachments for ammunition, and material handling.
 | This vehicle-related article is a stub. You can help Wikipedia by expanding it. |