Solar Turbines

Last updated
Solar Turbines Incorporated
Company type Private subsidiary
IndustryOil and Gas Production and Transmission
Power generation
Predecessor
Founded San Diego, California, United States (1927 (1927))
FounderGeorge Prudden et al.
Headquarters,
Area served
Worldwide
Key people
Derrick York, President of Solar Turbines and Senior Vice President of Caterpillar Inc.
ProductsTitan 350
Titan 250
Titan 130
Mars 100
Mars 90
Taurus 70
Taurus 65
Taurus 60
Mercury 50
Centaur 50
Centaur 40
Saturn 20
Saturn 10
Services Leasing
Financing
Maintenance
Overhauling
Training
Number of employees
9000
Parent Caterpillar Inc.
Website solarturbines.com
Footnotes /references
[1] [2] [3] [4]

Solar Turbines Incorporated, a wholly owned subsidiary of Caterpillar Inc., designs and manufactures industrial gas turbines for onshore and offshore electrical power generation, for marine propulsion and for producing, processing and transporting natural gas and oil.

Contents

The company traces its history to the 1927 founding of the Prudden-San Diego Airplane Company, which became the Solar Aircraft Company in 1929. Through the Great Depression, they mainly produced components for other manufacturers, growing during World War II and diversifying into non-aircraft products after the war. During this period, they won a number of contracts to produce jet engine components. Convinced that the gas turbine was the prime mover of the future, the company invested heavily in the development of small turbines.

The turbine never came to be the main prime mover, but Solar's expertise in small turbines found a number of niche roles. The company was purchased by International Harvester Company in early 1960, becoming the Solar Division of International Harvester in 1963. In 1973, the Solar Division exited the aerospace industry to focus solely on industrial turbines. In 1975, the development and manufacture of the Solar Division's radial engines was moved into a newly formed Radial Engines Group, renamed the Turbomach Division in 1980. [5]

Solar Turbines Incorporated became a wholly owned subsidiary of Caterpillar Tractor Co. after Caterpillar purchased the assets of the Solar Division and the Turbomach division from International Harvester on 31 May 1981. In 1985, Caterpillar sold the Turbomach Division to Sundstrand Corporation.

Prudden-San Diego Airplane Company

Solar Turbines traces its roots to the Prudden–San Diego Airplane Company, a partnership founded in 1927 between George Prudden and seven San Diego area businessmen. Due to differences in management philosophy between Prudden and his investors, Prudden left the company in November 1928. [6]

Solar Aircraft Company

First product—a trimotor airplane

In March 1929, Prudden-San Diego Airplane Company changed its name to Solar Aircraft Company, a reference to San Diego's sunny climate. [2] Solar Aircraft Company's main product was an all-metal passenger aircraft powered by three Siemens & Halske radial engines. Due to the Great Depression in 1929, the company was unable to market the aircraft and made only three airplanes. [6] [7]

From airplanes to airplane components

The sales failure of the tri-motor airplane due to the Great Depression led Solar Aircraft Company into making parts for other manufacturers, especially hard-to-manufacture parts able to withstand high-temperatures, such as stainless steel exhaust manifolds. The company was reincorporated in 1937 as the Solar Aircraft Company, dropping the "Ltd" from its name. [8] By 1939, Solar Aircraft Company had a work force of 229. [9] Military orders during World War II led to rapid expansion and by the end of the war the company had a workforce of 5,000, largely part of a massive effort to build more than 300,000 exhaust manifolds for U.S. airplanes. [2] [9]

Business dropped considerably after World War II and the management developed a plan to diversify into producing other stainless steel products including caskets, frying pans, bulk milk containers and even redwood furniture; [2] immediately after World War II, the company also produced the Solar Midget race car. Solar's expertise in hard-to-manufacture parts able to withstand high-temperatures led to contracts to produce jet engine components. Solar Aircraft began to design and manufacture completed turbine engines for the United States military for applications such as auxiliary power units, [9] fuselages, and rocket engine components of guided missiles. [10] Solar Aircraft continued to expand its product line and grow its business until it was purchased by International Harvester Company in early 1960, becoming the Solar Division of International Harvester in 1963. [11]

Developing expertise in gas turbines

Solar Aircraft Company's expertise in high-temperature metallurgy led to work producing components for some of the first US jet engines, including the General Electric I-40 and a contract from the US Navy to build an afterburner for the Westinghouse J34. [9] Solar Aircraft Company also won contracts for the Allison J33, Allison J35, Avro Canada Orenda, and Bristol Olympus. [9] It was during this time that one of its engineers, Wendell Reed, developed the pneumatic engine microjet controller, for which he won the Wright Brothers Medal in 1955 and which became widely used for gas turbines, afterburners, and ramjets. This controller is described in "Flight" magazine, 2 December 1955. [12]

Solar Aircraft Company's work in the jet engine field convinced the company's president, Edmund Price, that the turbine would be the main prime mover in the future. Solar Aircraft Company assembled a team under the direction of Paul Pitt in 1946 and started developing a small 80 horsepower (60 kW) axial-flow turbine as an auxiliary power unit for the US Army Air Force's Convair B-36 strategic bomber. The Army eventually canceled this contract, but Solar Aircraft Company soon won a contract from the US Navy in 1947 for a 250 kW system to provide emergency power on ships. First running in 1949, the T-400 would go on to provide power on minesweepers and landing craft. [13]

Solar Turbines T-62 turbine Solar T62 engine 2014-04-08 11-48.JPG
Solar Turbines T-62 turbine

Solar did win the contract to provide the APU for the first 632 KC-135A tankers for the Strategic Air Command.

In 1947, Leon Wosika and Eric Balje set up a second design line and developed a centrifugal-flow system that was much more compact than Solar's previous designs. Originally known as the MPM-45, the unit was delivered as the 45 horsepower (34 kW) "Mars". The Navy purchased the Mars to power portable fire fighting pumps on ships and gave it the designation T41. In 1956, the Navy turned to Solar to provide a slightly larger design to power a small helicopter, the Gyrodyne XRON-1. Solar Aircraft Company responded by developing a slightly larger version of the Mars, the 55 horsepower (41 kW) "Titan", which the Navy designated the T62. When the Navy abandoned development of Gyrodyne's XRON helicopter, Solar Aircraft Company adapted the Titan for service as an auxiliary power unit. Deliveries of this auxiliary power unit started in 1962. [14] The Navy also had Solar adapt the Titan into a free-turbine version designated by the Navy as the T66, but this unit was never put into use. Solar Aircraft Company designed other versions of the basic Mars design, including the 350 horsepower (260 kW) Spartan, and the 13.5 horsepower (10.1 kW) Gemini. [13]

In the late 1950s, the Navy once again turned to Solar, this time for a larger 750-kilowatt (1,010 hp) unit that would be used as an engine in a high-speed boat. The result was the axial-flow "Saturn" engine, which entered production in 1960. Solar started marketing the Saturn to industrial users needing a 1,000-horsepower (750 kW) unit for any role, and it went on to become the world's most widely used industrial gas turbine with some 4800 units in 80 countries. It remains in production today in two uprated and enhanced configurations. In order to make the system more attractive, Solar also started the design of various "front ends" that could be purchased as a complete unit with the Saturn. These included gas compressor sets, pump-drive packages and generator sets. These units, especially the gas compressors, are widely used in the natural gas industry as pumping units on pipelines. [2]

Solar Division of International Harvester

Just prior to the release of the Saturn, International Harvester purchased Solar Aircraft Company in early 1960.

In 1963, Solar Aircraft Company was re-organized as the Solar Division of International Harvester.

During the next decade, the Solar Division introduced a number of new designs, both larger and smaller than the Saturn. The Centaur, which first entered service in 1968, supplied 2,700 horsepower (2,000 kW), while the modern versions supply 4,700 horsepower (3,500 kW). In 1973, Solar exited the aviation industry to concentrate its resources on industrial gas turbines. [11]

Products separated into two divisions

In the spring of 1975, International Harvester placed Solar Division's radial engine designs into the newly formed Radial Engine Group.

In 1980, the Radial Engine Group was renamed, becoming the Turbomach Division. [11]

In 1977, the Solar Division introduced a larger version of the Centaur, the 10,600 horsepower (7,900 kW) Mars, re-using the name from the earlier smaller engine. The Mars is currently sold as the 13,220 horsepower (9,860 kW) Mars 90 and 16,000 horsepower (12,000 kW) Mars 100. [11]

Wholly owned subsidiary of Caterpillar Inc.

Caterpillar Tractor Co. purchased the assets of the Solar Division and the Turbomach Division from International Harvester on May 31, 1981. The newly acquired assets were organized as a wholly owned subsidiary of Caterpillar Tractor Co. named Solar Turbines Incorporated.

After the purchase, Caterpillar assigned development and manufacturing of the Caterpillar Model 5600 to Solar Turbines. The 5600 was originally developed by The Boeing Company as the Boeing 551/553 series, which Caterpillar had purchased when Boeing decided to exit the gas turbine business in 1966. [11]

Sale of Turbomach Division to Sundstrand

In 1985, Caterpillar sold the Turbomach Division to Sundstrand Corporation (now Collins Aerospace), exiting the Centrifugal gas turbine engine business. [15]

New products in the 80s and 90s

Solar Turbines Incorporated continued to introduce new versions of their axial-flow industrial engines throughout the 1980s and 90s, often re-using older names instead of introducing new names. In 1997, Solar Turbines Incorporated announced the Titan 130, a 19,500 horsepower (14,500 kW) design much larger than the original Titan. The latest model, the Titan 250, delivers 30,000 horsepower (22,000 kW). [2]

Solar Turbines Incorporated has also been involved in a number of projects to improve the fuel economy of industrial turbines of all sorts. In 1992, Solar Turbines introduced the SoLoNOx system. The SoLoNOx system uses lean-burn technologies to reduce NOx emissions. The SoLoNOx system has been retrofitted to over 2,000 turbines and all of Solar Turbine's more recent designs can be equipped with SoLoNOx as a feature. In 1997, Solar Turbines introduced a ceramic hot-section design for the Centaur 50 and introduced a recuperator for the Mercury 50, in experiments conducted with the US Department of Energy. [2]

Purchase of Turbomach S.A.

In 2004 Caterpillar acquired Swiss company Turbomach S.A. which had long been a packager of industrial turbines from Solar, Rolls-Royce, and Trent. [16]

Current product line

Solar Turbine Incorporated's product line currently consists of the Saturn, Centaur, Mercury, Taurus, Mars and Titan turbines, and a variety of attachments that are sold with them. To date, Solar has sold more than 15,000 gas turbine systems, with a combined operating history of over 2 billion hours of use, equivalent to over 100,000 years. [3]

Products

Electrical Generation Specifications [17]
ModelPOWER RATING

ISO Base Load

(MW)

HEAT RATE

Lower Heating

Value (LHV)

(Btu/kWhe)

POWER SHAFT

SPEED (RPM)

PRESSURE

RATIO

NUMBER

OF

COMBUSTORS

Exhaust

Flow

(lb/sec)

Exhaust

Temp

(°F)

Year Entered

Production

Saturn 201.214,81018006.71 (annular)14.39451960
Centaur 403.512,910180010.11 (annular)41.68301968
Centaur 504.611,630180010.61 (annular)41.8950
Mercury 504.68,86518009.91 (annular)396901998
Taurus 605.710,83018009.91 (annular)489501989
Taurus 656.510,2951800151 (annular)47.11000
Taurus 708.29,920180017.61 (annular)59.29701995
Mars 10011.410,365180017.71 (annular)93.1905
Titan 13016.59,605180017.11 (annular)1249151997
Titan 25023.18,775180024.41 (annular)153.98652008
Titan 350388,4951800--1 (annular)237.5910
Taurus 60 MPU5.710,83018009.91 (annular)48950
Titan 130 MPU16.59,605180017.11 (annular)124915

Note: Specifications are for natural gas fuel. MPU stands for Mobile Power Unit (trailer mounted). SMT stands for Solar Mobile Turbomachinery which is specifically designed to not need a crane to set up. Estimates are for natural gas fuel. Zero installation losses.

Mechanical Drive Specifications [18]
ModelPOWER RATING

ISO Base Load

(hp)

HEAT RATE

Lower Heating

Value (LHV)

(Btu/hp-hr)

POWER SHAFT

SPEED (RPM)

PRESSURE

RATIO

NUMBER

OF

COMBUSTORS

Exhaust

Flow

(kg/sec)

Exhaust

Temp

(°C)

Saturn 20159010360223006.71 (annular)6.5520
Centaur 40470091001550010.31 (annular)18.2450
Centaur 50613084851650010.31 (annular)18.8515
Taurus 60770079501400012.21 (annular)21.7510
Taurus 701115071901100016.51 (annular)27.2500
Mars 90132207655950016.31 (annular)40.2465
Mars 100159007395950017.11 (annular)42.6485
Titan 130224907020850016.11 (annular)56.1495
Titan 250300006360700024.11 (annular)68.2465

Related Research Articles

<span class="mw-page-title-main">Gas turbine</span> Type of internal and continuous combustion engine

A gas turbine, gas turbine engine, or also known by its old name internal combustion turbine, is a type of continuous flow internal combustion engine. The main parts common to all gas turbine engines form the power-producing part and are, in the direction of flow:

<span class="mw-page-title-main">Aircraft engine</span> Engine designed for use in powered aircraft

An aircraft engine, often referred to as an aero engine, is the power component of an aircraft propulsion system. Aircraft using power components are referred to as powered flight. Most aircraft engines are either piston engines or gas turbines, although a few have been rocket powered and in recent years many small UAVs have used electric motors.

<span class="mw-page-title-main">Pratt & Whitney Canada PT6</span> Turboprop aircraft engine family by Pratt & Whitney Canada

The Pratt & Whitney Canada PT6 is a turboprop aircraft engine produced by Pratt & Whitney Canada. Its design was started in 1958, it first ran in February 1960, first flew on 30 May 1961, entered service in 1964, and has been continuously updated since. The PT6 consists of two basic sections: a gas generator with accessory gearbox, and a free-power turbine with reduction gearbox. In aircraft, the engine is often mounted "backwards," with the intake at the rear and the exhaust at the front, so that the turbine is directly connected to the propeller. Many variants of the PT6 have been produced, not only as turboprops but also as turboshaft engines for helicopters, land vehicles, hovercraft, and boats; as auxiliary power units; and for industrial uses. By November 2015, 51,000 had been produced, which had logged 400 million flight hours from 1963 to 2016. It is known for its reliability, with an in-flight shutdown rate of 1 per 651,126 hours in 2016. The PT6A turboprop engine covers the power range between 580 and 1,940 shp, while the PT6B/C are turboshaft variants for helicopters.

<span class="mw-page-title-main">Rolls-Royce T406</span> Rolls-Royce North America turboshaft aircraft engine (1986)

The Rolls-Royce T406 is a turboshaft engine that powers the Bell Boeing V-22 Osprey tiltrotor. The engine delivers 6,000 shp (4,470 kW).

<span class="mw-page-title-main">Lycoming Engines</span> Manufacturer of aircraft engines

Lycoming Engines is a major American manufacturer of aircraft engines. With a factory in Williamsport, Pennsylvania, Lycoming produces a line of horizontally opposed, air-cooled, four, six and eight-cylinder engines including the only FAA-certified aerobatic and helicopter piston engines on the market.

<span class="mw-page-title-main">Continental Aerospace Technologies</span> Chinese-owned aircraft engine manufacturer

Continental Aerospace Technologies is an aircraft engine manufacturer located at the Brookley Aeroplex in Mobile, Alabama, United States. It was originally spun off from automobile engine manufacturer Continental Motors Company in 1929 and owned by Teledyne Technologies from 1969 until December 2010. The company is now part of Aviation Industry Corporation of China (AVIC), which is a Government of the People's Republic of China state-owned aerospace company headquartered in Beijing.

<span class="mw-page-title-main">Pratt & Whitney Canada</span> Aircraft engine manufacturer

Pratt & Whitney Canada is a Canada-based aircraft engine manufacturer. PWC's headquarters are in Longueuil, Quebec, just outside Montreal. It is a division of the larger US-based Pratt & Whitney (P&W), itself a business unit of RTX Corporation. United Technologies had given PWC a world mandate for small and medium aircraft engines while P&W's US operations develop and manufacture larger engines.

<span class="mw-page-title-main">Allison T56</span> American-built military turboprop (1954–)

The Allison T56 is an American single-shaft, modular design military turboprop with a 14-stage axial flow compressor driven by a four-stage turbine. It was originally developed by the Allison Engine Company for the Lockheed C-130 Hercules transport entering production in 1954. It has been a Rolls-Royce product since 1995 when Allison was acquired by Rolls-Royce. The commercial version is designated 501-D. Over 18,000 engines have been produced since 1954, logging over 200 million flying hours.

<span class="mw-page-title-main">Honeywell TPE331</span> Turboprop aircraft engine

The Honeywell TPE331 is a turboprop engine. It was designed in the 1950s by Garrett AiResearch, and produced since 1999 by successor Honeywell Aerospace. The engine's power output ranges from 575 to 1,650 shaft horsepower.

<span class="mw-page-title-main">General Electric GE38</span> Gas turbine

The General Electric GE38 is a gas turbine developed by GE Aviation for turboprop and turboshaft applications. It powers the Sikorsky CH-53K King Stallion as the T408.

<span class="mw-page-title-main">Westinghouse J34</span> Turbojet engine

The Westinghouse J34, company designation Westinghouse 24C, was a turbojet engine developed by Westinghouse Aviation Gas Turbine Division in the late 1940s. Essentially an enlarged version of the earlier Westinghouse J30, the J34 produced 3,000 pounds of thrust, twice as much as the J30. Later models produced as much as 4,900 lb with the addition of an afterburner. It first flew in 1947. The J46 engine was developed as a larger, more powerful version of Westinghouse's J34 engine, about 50% larger.

<span class="mw-page-title-main">Garrett AiResearch</span> Former American manufacturer of aircraft engines

Garrett AiResearch was a manufacturer of turboprop engines and turbochargers, and a pioneer in numerous aerospace technologies. It was previously known as Aircraft Tool and Supply Company, Garrett Supply Company, AiResearch Manufacturing Company, or simply AiResearch. In 1964, Garrett AiResearch merged with Signal Oil & Gas, to form a company renamed in 1968 to Signal Companies. In 1985, it merged with Allied Corporation, forming AlliedSignal. In 1999 AlliedSignal acquired Honeywell and adopted the Honeywell name.

<span class="mw-page-title-main">Garrett TPF351</span> 1980s American turboprop engine

The Garrett TPF351 is a turboprop engine designed by Garrett Engine Division of AlliedSignal Aerospace Company. Initiated by Garrett in October 1987, the TPF351-20 engine was selected by Embraer to power the Embraer/FMA CBA 123 Vector, a high-speed commuter "pusher" aircraft. It was first tested on May 19, 1989 and then ground tested and flight tested on a Boeing 720 on July 9, 1990. The first prototype CBA 123 was tested on July 18, 1990, followed by a flight to the Farnborough Air Show in September of the same year. Both programs were cancelled in 1992, when the TPF351 was nine months from engine certification.

The Boeing T60 was a family of small turboshaft/turboprop engines produced by Boeing, based on Boeing's earlier Model 500 gas generator and Model 502 (T50) turboshaft engines.

John Clifford Garrett was an American entrepreneur who founded a company in Los Angeles in 1936 which came to be known as Garrett AiResearch. The company was first named Aircraft Tool and Supply Company, then by early 1937 was renamed as Garrett Supply Company, and by 1939, AiResearch and shortly thereafter AiResearch Manufacturing Company, which then became a division within the Garrett Corporation.

<span class="mw-page-title-main">Solar T62</span> Type of aircraft

The Solar T62 Titan is an American gas turbine engine used mainly as a aircraft auxiliary power unit (APU), conventional power generator, turboprop engine for fixed-wing aircraft or turboshaft engine for helicopters. A new turbine version was developed as the Solar T66.

The Flader J55, also known as the 124 within the company, was a small turbojet engine notable for its use of a supersonic axial-flow compressor. Development started at Fredric Flader Inc. in 1947, with the first examples being delivered in 1949. However, these delivered far lower power than predicted. Improved models followed in early 1952 that met the performance requirements, but demonstrated very poor reliability. When small engines from other companies became available, the J55 project was cancelled in 1952.

<span class="mw-page-title-main">George H. Prudden</span> American aircraft engineer

George Henry Prudden, Jr. was an American aircraft engineer. He was instrumental in designing the first all metal aircraft in America. He was president of the Early Birds of Aviation in 1961.

The West Engineering XJ38 was a small turbojet engine created by modifying World War II-surplus aircraft engine turbosuperchargers. Intended to be a cheap method of producing jet engines for target drones for the United States Navy, the latter lost interest in the project, which was soon discontinued because of lack of funding.

The Allison TF32 was a turbofan engine proposed by the Allison Division of General Motors in the 1960s. It was named as a finalist for the U.S. Navy's VSX aircraft for anti-submarine warfare (ASW) in January 1967, but lost the competition to the General Electric TF34 in early 1968.

References

Notes

  1. Caterpillar Inc 2010.
  2. 1 2 3 4 5 6 7 Solar Turbines 2006.
  3. 1 2 Solar Turbines 2006a.
  4. SolarTurbines 2006b.
  5. Leyes & Fleming 1999, pp. 83–84.
  6. 1 2 Leyes & Fleming 1999, p. 77.
  7. Cunningham, Frank (November 1939). "Pots and Pans but No Airplanes". Flying. Vol. 25, no. 5. pp. 36–37, 68, 86, 88. Retrieved 1 August 2021.
  8. "Business Reports". Aero Digest. Vol. 30, no. 1. January 1937. p. 88. Retrieved 1 August 2021.
  9. 1 2 3 4 5 Leyes & Fleming 1999, p. 78.
  10. Missiles and Rockets, March, 1957, v. 2, no. 3, p. 11.
  11. 1 2 3 4 5 Leyes & Fleming 1999, p. 83.
  12. "jet nozzle | variable-area jet | microjet pressure-ratio | 1955 | 1728 | Flight Archive". www.flightglobal.com. Archived from the original on 2013-01-22.
  13. 1 2 Leyes & Fleming 1999, p. 79.
  14. Leyes & Fleming 1999, p. 81.
  15. Ansley 1985.
  16. "Caterpillar buys Turbomach S.A." Equipment World. June 28, 2004. Retrieved 2020-06-01.
  17. "Turbomachinery International: Handbook 2024". Turbomachinery Magazine. 64 (6). 2023-10-23.
  18. International Turbomachinery Handbook 2017 p. 98

Bibliography