Chicago Card

Chicago Card
Location	Chicago
Launched	1997 ; (discontinued in 2014)
Technology	Smart Card ;
Manager	RFID
Currency	USD
Stored-value	Pay-Per-Ride
Validity	Chicago Transit Authority ; Pace Suburban Bus ;
Variants	Chicago Card Plus;
Website	www.chicago-card.com

Last updated October 06, 2024

The Chicago Card and the Chicago Card Plus were contactless smart cards used by riders of the Chicago Transit Authority (CTA) and Pace to electronically pay for bus and train fares in the city of Chicago, Illinois, USA and the surrounding suburbs. On June 1, 2014, CTA and Pace stopped accepting these cards as part of a transition to Ventra.^[1]

The blue Chicago Card was a stored value card. Users added value to the card at CTA vending machines or at select retail locations, and turnstiles or fareboxes deducted value from the card. Users usually registered cards with CTA and could receive a replacement in the event of theft, loss, or damage to the card.

The blue-and-gold Chicago Card Plus was an account-based card. Users linked the card to either a credit card, debit card, or employer-provided transit benefit program. The cards could be set up as monthly passes or on a pay-per-use basis. The account reloaded from the linked source either when the monthly pass expired or when a user-defined threshold was passed on a pay-per-use card. Because of this direct link to personal accounts, all Chicago Card Plus cards were registered by their users.

History

CTA's Automated Fare Collection (AFC) system was installed in 1997 by Cubic Transportation Systems, Inc., the largest provider of AFC systems in the USA. The AFC system replaced the CTA's tokens with magnetic-stripe stored-value cards printed on plastic or paper based on Cubic's earlier MetroCard implementation in New York City. All fare collection and payment equipment was designed to be retrofitted at a later date with smart card readers, a technology that was on the horizon. A small pilot program ("Chicago Gold") for reduced-fare disabled riders in 1999 led to a contract with Cubic to install smart card readers universally in 2000. In August 2000, a more extensive "Chicago Card" pilot program distributed stored-value smart cards to volunteer participants. The pilot program was expanded system-wide in November 2002. The Chicago Card Plus debuted in January 2004. "Go Lane" card readers were installed in the buses, starting in 2005, allowing Chicago Card users to bypass the line of passengers using the farebox; however, only one payment could be accepted at a time, eliminating this possible efficiency. The Go Lane card readers were removed starting in May 2010 and Chicago Card card readers were moved back to the main fare box.^[2]

In February 2007, CTA announced that it had settled a class action lawsuit alleging there were not enough Chicago Cards available to meet demand on January 1, 2006, when the cash fare increase went into effect, but Chicago Card users were charged the old fares.^[3]

Benefits

Benefits of the Chicago Card and the Chicago Card Plus included the following:

Because it was a contactless card, the card never needed to be removed from its holder, be it a wallet, purse, or backpack. (It may have needed to be removed if there was another smartcard nearby)
The Chicago Card could be reloaded at any L stop and many currency exchanges and supermarkets.
If registered, the card could be replaced.
The Chicago Card Plus was an account-based system that allowed customers to manage their account using the internet and a credit card for added convenience.
Until July 1, 2013, Chicago Card and Chicago Card Plus users paid only $2.25 at the O'Hare Blue Line station instead of the new $5 fare.

Disadvantages

A 30-day pass was only possible with the Chicago Card Plus.
Unlike many other transit "monthly passes" the Chicago Card Plus only offered a "30 day pass," meaning the pass was active for 30 days regardless of when the account is activated. This card had to be loaded twice in some months because of this feature.
In order to obtain a 30-day pass, users needed to link a credit or debit card account. Reloading at CTA/retail locations was not possible.
In order to postpone a 30-day pass (even for one day) the entire card had to be deactivated and could not be reactivated. (A new card had to be activated.)
The regular (blue-only) Chicago Card was only able to be loaded at specified CTA/retail locations.
Users were unable to transfer funds between Chicago Card and Chicago Card Plus.
The two cards had very little in common, making it difficult to choose which card to purchase. Some users found themselves possessing both cards depending on their commuting needs and financial situations. This caused riders to spend more money than necessary in order to maintain the two cards.
Because the cards were registered to discrete individuals, the CTA could track user movement through the system.
All cards expired four years from date of manufacture and had to be replaced when they expired. Though the replacement was free there was no expiry date printed on the card and recovering a balance could occasionally be difficult.^[4]
The card sometimes had to be taken out of the user's wallet if there was another smartcard close by.^[5]

Student Pass

In addition to the blue card, CTA also offered transit cards to students in both grammar schools and high schools. The passes included the phrase "STUDENT RIDING PERMIT", the year that the card was active, and the card's expiration date. The cards appeared in a variety of colors including pink, blue, and yellow. Student Passes could be bought at many schools and allowed students to pay $0.75 instead of the standard $2.25 fare. Disadvantages included the possibility that presentation of the passenger's student ID might be required in order for the pass to be honored and that the card was only valid on school days when school was in session (Monday through Friday, from 5:30 A.M. to 8:30 P.M., excluding holidays such as Thanksgiving Day, Labor Day, Memorial Day, and the two-week winter break period including Christmas Day and New Years).

Phase-Out

The CTA announced it would replace the Chicago Card and other fare media with a new electronic fare payment system named Ventra.^[6] There are also reports that the Regional Transportation Authority is planning to require that Pace and Metra adopt that system.^[7] The transition to Ventra was completed in the summer of 2014.

Related Research Articles

<span class="mw-page-title-main">MetroCard</span> Public transit payment system in the New York City area

The MetroCard is a magnetic stripe card used for fare payment on transportation in the New York City area. It is a payment method for the New York City Subway, New York City Transit buses and MTA buses. The MetroCard is also accepted by several partner agencies: Nassau Inter-County Express (NICE), the PATH train system, the Roosevelt Island Tramway, AirTrain JFK, and Westchester County's Bee-Line Bus System.

The Chicago Transit Authority (CTA) is the operator of mass transit in Chicago, Illinois, United States, and some of its suburbs, including the trains of the Chicago "L" and CTA bus service. In 2023, the system had a ridership of 279,146,200, or about 977,000 per weekday as of the second quarter of 2024.

<span class="mw-page-title-main">SmarTrip</span> Contactless transit card system used in the Washington, D.C. metro area

SmarTrip is a contactless stored-value smart card payment system managed by the Washington Metropolitan Area Transit Authority (WMATA). The Maryland Transit Administration (MTA) uses a compatible payment system called CharmCard. A reciprocity agreement between the MTA and WMATA allows either card to be used for travel on any of the participating transit systems in the Baltimore-Washington metropolitan area. Unlike traditional paper farecards or bus passes, SmarTrip/CharmCard is designed to be permanent and reloadable; the term "SmarTrip" may refer to both payment systems unless otherwise noted.

<span class="mw-page-title-main">EZ-Link</span> Contactless smart card used in Singapore

The EZ-Link card is a rechargeable contactless smart card and electronic money system that is primarily used as a payment method for public transport such as bus and rail lines in Singapore. A standard EZ-Link card is a credit-card-sized stored-value contact-less smart-card that comes in a variety of colours, as well as limited edition designs. It is sold by SimplyGo Pte Ltd, a merged entity of TransitLink and EZ-Link since 2020, a subsidiary of the Land Transport Authority (LTA), and can be used on travel modes across Singapore, including the Mass Rapid Transit (MRT), the Light Rail Transit (LRT), public buses which are operated by SBS Transit, SMRT Buses, Tower Transit Singapore and Go-Ahead Singapore, as well as the Sentosa Express.

The Go-To card is a contactless smart card used to pay fares for bus, light rail, and commuter rail lines operated by Metro Transit and other transit agencies in the Twin Cities area of Minnesota. The system has significantly sped up boardings on area buses while alleviating wear and tear on existing ticket machines and fare boxes. The old magnetic strip reading machines were weather sensitive and could not be placed out in the elements like at the Hiawatha Line light rail stations.

SmartRider is the contactless electronic ticketing system of the Public Transport Authority of Western Australia. The system uses RFID smartcard technology to process public transport fares across public bus, train, and ferry services.

The Clipper card is a reloadable contactless smart card used for automated fare collection in the San Francisco Bay Area. First introduced as TransLink in 2002 by the Metropolitan Transportation Commission (MTC) as a pilot program, it was rebranded in its current form on June 16, 2010. Like other transit smart cards such as the Oyster card, the Clipper card is a credit card-sized stored-value card capable of holding both cash value and transit passes for the participating transit agencies. In addition to the traditional plastic card, Clipper is available as a virtual card in Google Wallet and Apple Wallet. Clipper is accepted by nearly all public transit services in the Bay Area, including but not limited to Muni, BART, Caltrain, AC Transit, SamTrans, Golden Gate Transit, Golden Gate Ferry, San Francisco Bay Ferry, and VTA.

<span class="mw-page-title-main">CharlieCard</span> Public transit smart card used in Boston

The CharlieCard is a contactless smart card used for fare payment for transportation in the Boston area. It is the primary payment method for the Massachusetts Bay Transportation Authority (MBTA) and several regional public transport systems in the U.S. state of Massachusetts. It is used on the MBTA's subway and bus services, but is not currently accepted on the MBTA Commuter Rail and ferries.

Rail operators are government-assisted profit-based corporations, fares and ticketing on Singapore's Mass Rapid Transit (MRT) system are aimed to break-even or exceed operating expenses. Rail operators collect fares based on account-based (ABT) and card-based ticketing options, the prices of which are calculated based on the distances travelled between the origin and destination. These prices increase in stages for standard non-concessionary travel, according to the distances travelled. In account-based ticketing, the fare is automatically calculated in the back-end and charged to the passenger post journey. On the other hand, card-based ticketing is proprietary to the transport network and the fare is computed by the system based on the store values recorded in the cards. The public transit system is harmonising towards full ABT.

The Breeze Card is an American stored value smart card that passengers use as part of an automated fare collection system which the Metropolitan Atlanta Rapid Transit Authority (MARTA) introduced to the general public in early October 2006. The card automatically debits the cost of the passenger’s ride when placed on or near the Breeze Target at the fare gate. Transit riders are able to add value or time-based passes to the card at Breeze Vending Machines (BVM) located at all MARTA stations. The major phases of MARTA's Breeze transformation took place before July 1, 2007 when customers were still able to purchase TransCards from ridestores or their employers. They were also able to obtain paper transfers from bus drivers to access the train. As of July 1, 2007 the TransCard and the paper transfers were discontinued and patrons now use a Breeze Card or ticket to access the system, and all transfers are loaded on the card. Breeze Vending Machines (BVM) distribute regional transit provider passes The Breeze Card employs passive RFID technology currently in use in many transit systems around the world.

<span class="mw-page-title-main">SmartLink (smart card)</span> Public transit payment system in the New York City area

SmartLink is a RFID-enabled credit card-sized smartcard that is the primary fare payment method on the PATH transit system in Newark and Hudson County in New Jersey and Manhattan in New York City. It was designed to replace PATH's paper-based farecard, QuickCard, and there was plans to expand its usage throughout most transit agencies in the tri-state area. The SmartLink card has been available to the public since July 2, 2007. Although the MetroCard used on the Metropolitan Transportation Authority (MTA)'s transit system can also be used on the PATH, the reverse is not true for SmartLink, which cannot be used on the MTA's system.

The ORCA card is a contactless, stored-value smart card system for public transit in the Puget Sound region of Washington, United States. The card is valid on most transit systems in the Seattle metropolitan area, including Sound Transit, local bus agencies, Washington State Ferries, the King County Water Taxi, and Kitsap Fast Ferries. It was launched in 2009 and is managed by the Central Puget Sound Regional Fare Coordination Project, a board composed of local transit agencies.

A transit pass or travel card, often referred to as a bus pass or train pass etc., is a ticket that allows a passenger of the service to take either a certain number of pre-purchased trips or unlimited trips within a fixed period of time.

<span class="mw-page-title-main">Opus card</span> Public transit smart card in Quebec, Canada

Opus is a rechargeable, dual interface (contact/contactless) stored-value smart card using the Calypso Standard and is used by major public transit operators in Greater Montreal and Quebec City, Quebec, Canada. It complies with the ISO/IEC 14443 standard for smartcards and can be read by smartphones with an NFC antenna.

The go card is an electronic smartcard ticketing system developed by Cubic Corporation, which is currently used on the Translink public transport network in South East Queensland, Australia. To use the go card, users hold the card less than 10 cm away from the reader to "touch on" before starting a journey, and must do the same to "touch off" the service at the end of the journey. The cost of each journey is deducted from the go card balance.

<span class="mw-page-title-main">Transit Access Pass</span> Physical and electronic public transit smart card used in Los Angeles

The Transit Access Pass (TAP) is a contactless smart card used for automated fare collection on most public transport agencies within Los Angeles County, California. The card is also available in electronic form, free of charge, in Apple Wallet, thereby bypassing the need to purchase the plastic USD $2 card. It is administered by the Los Angeles County Metropolitan Transportation Authority (Metro), and the card and fare collection systems are manufactured by Cubic Transportation Systems.

The Easy Card is a contactless smartcard system for public transit fares in the Miami metropolitan area. The Easy Card is valid on Metrobus and Metrorail services in Miami-Dade County, and on Tri-Rail services throughout the region. Easy Card payments were introduced in 2009 on Miami-Dade Transit services, and expanded to Tri-Rail in 2011. The card functions as a stored-value card, and can also be loaded with unlimited-ride passes. Reduced-fare and zero-fare versions of the Easy Card are available for eligible customers, including seniors and individuals with disabilities.

Cubic Corporation is an American multinational defense and public transportation equipment manufacturer. It operates two business segments: Cubic Transportation Systems (CTS) and Cubic Mission and Performance Solutions (CMPS).

<span class="mw-page-title-main">Ventra</span> Public transit smart card used in Chicago

Ventra is an electronic fare payment system for Regional Transportation Authority (Illinois) which replaced the Chicago Card and the Transit Card automated fare collection systems. Ventra launched in August 2013, with a full system transition occurring in July 2014. The payment system includes several options for payment, including a contactless smart card powered by RFID, a single day or use ticket powered by RFID, any personal bank-issued credit card or debit card that has an RFID chip, or a compatible mobile phone. Ventra is operated by Cubic Transportation Systems. A smartphone app allows users to manage fares, buy passes, and also buy mobile tickets for Metra.

Hop Fastpass is a contactless smart card for public transit fare payment on most transit modes in the Portland, Oregon, metropolitan area including MAX Light Rail, WES commuter rail, Portland Streetcar, The Vine, and all TriMet and C-TRAN buses. An initial release to the general public began on July 5, 2017, with the official launch on July 17. The program is managed by TriMet.

References

↑ "Transitioning to Ventra". Press Releases. Chicago Transit Authority. Archived from the original on June 20, 2014. Retrieved June 14, 2014.
↑ "Keep Your Eye on the Target!". Press Releases. Chicago Transit Authority. Retrieved January 14, 2013.
↑ "CTA Settles Chicago Cards Lawsuit" (Press release). Chicago Transit Authority. February 16, 2007. Archived from the original on February 18, 2007.
↑ "Expiring/Expired Cards". Chicago Card - Frequently Asked Questions. Chicago Transit Authority. Archived from the original on March 13, 2010. Retrieved July 12, 2010.
↑ "Using a Chicago Card Plus". Chicago Card Plus - Frequently Asked Questions. Chicago Transit Authority. 2008. Archived from the original on September 8, 2008. Retrieved August 1, 2008.
↑ "Ventra Chicago". Chicago Transit Authority . Retrieved March 20, 2013.
↑ Richard Wronski (April 3, 2009). "RTA aims for 1 fare card for all transit". Chicago Tribune. Archived from the original on April 21, 2012. Retrieved December 26, 2009.

External links

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.

[1] "Transitioning to Ventra". Press Releases. Chicago Transit Authority. Archived from the original on June 20, 2014. Retrieved June 14, 2014.

[2] "Keep Your Eye on the Target!". Press Releases. Chicago Transit Authority. Retrieved January 14, 2013.

[3] "CTA Settles Chicago Cards Lawsuit" (Press release). Chicago Transit Authority. February 16, 2007. Archived from the original on February 18, 2007.

[4] "Expiring/Expired Cards". Chicago Card - Frequently Asked Questions. Chicago Transit Authority. Archived from the original on March 13, 2010. Retrieved July 12, 2010.

[5] "Using a Chicago Card Plus". Chicago Card Plus - Frequently Asked Questions. Chicago Transit Authority. 2008. Archived from the original on September 8, 2008. Retrieved August 1, 2008.

[Ventra-6] "Ventra Chicago". Chicago Transit Authority . Retrieved March 20, 2013.

[7] Richard Wronski (April 3, 2009). "RTA aims for 1 fare card for all transit". Chicago Tribune. Archived from the original on April 21, 2012. Retrieved December 26, 2009.

[1]

[2]

[3]

[4]

[5]

[6]

[7]