Commonwealth Railways

Last updated

Commonwealth Railways
IndustryRailway operator
Founded1917
DefunctJune 1975
Successor Australian National Railways Commission, branded as Australian National and subsequently AN
Headquarters
Area served
Northern Territory
South Australia
Western Australia
Parent Australian Government, termed Commonwealth Government when the Commonwealth Railways were extant

The Commonwealth Railways were established in 1917 by the Government of Australia with the Commonwealth Railways Act to administer the Trans-Australia and Port Augusta to Darwin railways. In 1975, all assets were acquired by the Australian National Railways Commission, branded as Australian National Railways and subsequently Australian National, trademarked as AN.

Contents

Operated railways

Trans-Australian Railway

Construction of the standard-gauge Trans-Australian Railway between Port Augusta and Kalgoorlie commenced in 1912. Despite the inhospitable nature of the terrain [1] and wartime supply problems, satisfactory progress was made, and the two tracklaying machines, one working from each end, met near Ooldea on 17 October 1917.

The promise to construct the Trans-Australian Railway had been one of the principal inducements to Western Australia to join the Commonwealth of Australia during federation, and it was for the purpose of surveying and constructing this railway that the Commonwealth Railways Department was initially formed. It was a matter of misfortune that its two termini were break-of-gauge stations connecting with narrow-gauge lines that formed part of the transcontinental link.

In 1937, the eastern end was extended south to Port Pirie, enabling one less break of gauge in the trip across Australia, but at the same time establishing a three-gauge junction at Port Pirie with the 1,600 mm (5 ft 3 in) broad gauge South Australian Railways line to Adelaide.

The Trans-Australian Railway remained an isolated stretch of standard-gauge track between two narrow-gauge railways until 1968, when the Kalgoorlie to Perth standard-gauge line replaced the line at the western end, and 1970 when a standard-gauge line from Port Pirie to Broken Hill replaced a narrow-gauge line, completing the long-delayed project to connect Perth to Sydney with one standard gauge.

The Trans-Australian Railway remained fundamentally a single-track main line, the only branch line being a short section from Pimba to Woomera (officially known as a stores siding, though a passenger service operated when Woomera was the base of a large rocket testing range). There are two junctions: one on the outskirts of Port Augusta is the line to Whyalla, which opened for traffic in 1972; and one at Tarcoola is the Central Australia Railway, which opened in 1980.

North Australia Railway

Preserved NSU class narrow-gauge diesel-electric locomotive at the Old Ghan Heritage Railway and Museum, Alice Springs, in 2006. As with the NT class, these locomotives operated on both the North Australia Railway and the Central Australia Railway. Commonwealth Railways NSU class diesel-electric locomotive at the Old Ghan Heritage Railway and Museum, 2006.jpg
Preserved NSU class narrow-gauge diesel-electric locomotive at the Old Ghan Heritage Railway and Museum, Alice Springs, in 2006. As with the NT class, these locomotives operated on both the North Australia Railway and the Central Australia Railway.

The North Australia Railway was the name given to the Northern Territory narrow-gauge railway that extended south from Darwin to Birdum. Construction of this line was commenced by the Government of South Australia, being known then as the Palmerston & Pine Creek Railway, it opened in 1889. [1]

When the administration of the Northern Territory passed from South Australia to the Commonwealth Government on 1 January 1911, the railway was transferred to Commonwealth ownership. The railway was initially placed under the control of the Administrator of the Northern Territory. At this time, it was known as the Northern Territory Railway, but was transferred to the control of the Commonwealth Railways Commissioner in 1918. [2] [3] [4] [5] [6]

It was renamed the North Australia Railway in 1926. Extensions to Birdum were completed in 1929, but during and following World War II, the effective railhead was Larrimah, a few miles north.

The railway gained increased importance in the 1960s and early 1970s through the mining of iron ore from the Frances Creek deposits, about 230 kilometres south of Darwin. Ore traffic exceeded one million tons per annum, but after the mine closed, other traffic was not enough to justify keeping the railway open and it closed in 1976. [7]

Australian Capital Territory Railway

In March 1913, work began on an 8.5 kilometre standard-gauge line from Canberra to Queanbeyan on the Bombala line. The line was constructed by the New South Wales Public Works Department on behalf of the Federal Government. [8] [ page needed ] Canberra station along with the line to Queanbeyan was owned and staffed by Commonwealth Railways even though all services on the line were operated by the New South Wales Government Railways. [9]

Central Australia Railway

Ex-Commonwealth Railways NT class locomotives NT67 and NT76 loading a bulk wheat train at Wirrabara in 1987 on the now-abandoned Gladstone-Wilmington narrow-gauge railway line of the former South Australian Railways. The locomotives are badged as Australian National Railways, the entity that took over the operations of both the Commonwealth Railways and the South Australian Railways in 1975. NTswirrabarra.jpg
Ex-Commonwealth Railways NT class locomotives NT67 and NT76 loading a bulk wheat train at Wirrabara in 1987 on the now-abandoned GladstoneWilmington narrow-gauge railway line of the former South Australian Railways. The locomotives are badged as Australian National Railways, the entity that took over the operations of both the Commonwealth Railways and the South Australian Railways in 1975.

The Central Australia Railway extended from Port Augusta to Alice Springs. Work on the first section of this railway was commenced by the South Australian Railways in 1878. [1]

Under South Australian ownership, the railway, known as the Great Northern Railway, [10] was extended in stages and reached Oodnadatta in 1891. The South Australian Government subsequently made offers to several syndicates to construct a line north from Oodnadatta to Pine Creek on the land grant system, however negotiations were unsuccessful and Oodnadatta remained the railhead.

Like the North Australia Railway, this railway passed to Commonwealth ownership on 1 January 1911, but continued to be operated by the South Australian Railways until the Commonwealth Railways took over operations on 1 January 1926. An extension of the railway to Alice Springs was completed in 1929.

In the years following World War II, large tonnages of coal were railed from Leigh Creek and heavy demands were placed on the railway. In many ways, the original line was inadequate; sharp curves and heavy gradients limited train loads, whilst light track and bridges restricted speeds and axle loads. Consequently, a new standard-gauge Stirling North to Marree line was constructed and extended from Stirling North, via Telford to Marree. During the construction stages, and after washaways on the old line, but with the new standard-gauge line available to that point, complete trains of narrow-gauge wagons were carried (Piggyback) style to Brachina, 140 kilometres from Stirling North. [11] [12] Completed in 1957, the new line enabled much larger quantities of coal to be carried. [13]

The old narrow-gauge line between Marree and Hawker was closed, but between Stirling North and Hawker it was retained and used to a limited extent for some years. The line between Stirling North and Hawker was closed in 1972 and the section between Stirling North and Quorn handed over to the operations of the Pichi Richi Railway.

Gauges

Narrow gauge

The Commonwealth Railways owned and operated 1,067 mm (3 ft 6 in) narrow-gauge lines on the Central Australia Railway (Port Augusta via Quorn and Marree to Alice Springs); and the North Australia Railway.

Standard gauge

The Commonwealth Railways owned and operated 1,435 mm (4 ft 8+12 in) standard-gauge lines on the Trans-Australian Railway; the Central Australia Railway (both Tarcoola to Alice Springs and Port Augusta via Leigh Creek to Marree); and Whyalla to Port Augusta.

Named trains

The Ghan

Preserved carriage from the narrow-gauge Ghan in Alice Springs in February 2009 Restaurant car old Ghan-train.jpg
Preserved carriage from the narrow-gauge Ghan in Alice Springs in February 2009

The Ghan train commenced operation for the Commonwealth Railways when they took over the narrow-gauge Central Australia Railway from the South Australian Railways in 1926. It ran between Port Augusta and Oodnadatta initially, being extended to Alice Springs in 1929. When the new standard gauge to Marree line opened in 1957 the journey was broken into two. A standard-gauge run from Port Pirie Junction to Marree, with the rest of the journey remaining on narrow gauge.

Indian Pacific

The Indian Pacific commenced operating in February 1970 between Sydney and Perth following completion of the standard gauge line. Commonwealth Railways were responsible for the train from Port Pirie to Kalgoorlie.

Tea & Sugar

The Tea & Sugar was a train that serviced isolated Australian towns between Port Augusta and Kalgoorlie. The train provided all the supplies for remote towns in South and Western Australia that were mainly inhabited by railway workers who maintained the line.

Trans-Australian

GM class on the Trans-Australian at Rawlinna in May 1986 GM29 Rawlinna, 1986.JPG
GM class on the Trans-Australian at Rawlinna in May 1986

The Trans-Australian Passenger train ran between Port Augusta and Kalgoorlie that commenced in 1917 and was still being operated by Australian National when it ceased in 1991.

Fleet

For its standard gauge operations, Commonwealth Railways purchased G, K, KA, C, CA, CN and L class steam locomotives. From 1951, it purchased Clyde Engineering built GM and CL class diesel locomotives. It also purchased three CB railcars.

For its narrow gauge operations, NC, NSU, NT and NJ diesels were purchased to replace steam locomotives inherited from the South Australian Railways in 1911.

In 1936, the company owned 105 locomotives, 2 railcars, 67 coaches, 14 brake vans and over 1000 freight wagons. [14]

Commissioners

Demise

Australian National Railways was established by the Whitlam Federal Government following a commitment made in the 1972 election to invite the states to hand over their railway systems to the federal government. In July 1975, Australian National Railways was formed taking over the operations of Commonwealth Railways.

During the next two years, discussions between the state governments of South Australia and Tasmania and the federal government resulted in all South Australian Railways services (except the Adelaide metropolitan passenger network) and all Tasmanian Government Railways services transferring to Australian National Railway in March 1978, the latter being rebranded AN Tasrail.

Related Research Articles

<i>The Ghan</i> Passenger train on the Adelaide–Darwin route

The Ghan is an experiential tourism-oriented passenger train service that operates between the northern and southern coasts of Australia, through the cities of Adelaide, Alice Springs and Darwin on the Adelaide–Darwin rail corridor. Operated by Journey Beyond Rail Expeditions, its scheduled travelling time, including extended stops for passengers to do off-train tours, is 53 hours 15 minutes to travel the 2,979 kilometres (1,851 mi). The Ghan has been described as one of the world's great passenger trains.

<span class="mw-page-title-main">Adelaide–Darwin railway line</span> Railway line in Australia

The Adelaide–Darwin railway line is a railway line in Australia, between the South Australian town of Tarcoola and the Northern Territory city of Darwin. Preceded by a number of other shorter railways, a line through to Darwin was fully realised in 2004 when the final link from Alice Springs to Darwin was opened. Forming the main section of the 2,975 kilometres (1,849 mi) rail corridor between the cities of Adelaide and Darwin, the line is used by The Ghan passenger train and interstate freight trains operated by Aurizon.

<span class="mw-page-title-main">Marree, South Australia</span> Town in South Australia

Marree is a small town located in the north of South Australia. It lies 589 kilometres (366 mi) North of Adelaide at the junction of the Oodnadatta Track and the Birdsville Track, 49 metres (161 ft) above sea level. Marree is an important service centre for the large sheep and cattle stations in northeast South Australia as well as a stopover destination for tourists traveling along the Birdsville or Oodnadatta Tracks.

<span class="mw-page-title-main">Quorn, South Australia</span> Town in South Australia

Quorn is a small town and railhead in the Flinders Ranges in the north of South Australia, 39 kilometres (24 mi) northeast of Port Augusta.

<span class="mw-page-title-main">Pichi Richi Railway</span> Heritage railway in South Australia

Pichi Richi Railway is a 39 kilometres narrow-gauge heritage railway in the southern Flinders Ranges of South Australia between Quorn and Port Augusta. For much of its length the line lies in the picturesque Pichi Richi Pass, where the line was completed in 1879 as work proceeded north to build a railway to the "Red Centre" of Australia – the Central Australia Railway.

<span class="mw-page-title-main">Central Australia Railway</span> Former narrow-gauge railway line in the north of South Australia and in the Northern Territory

The former Central Australia Railway, which was built between 1878 and 1929 and closed in 1980, was a 1241 km (771 mi) 1067 mm narrow gauge railway between Port Augusta and Alice Springs. A standard gauge line duplicated the southern section from Port Augusta to Maree in 1957 on a new nearby alignment. The entire Central Australia Railway was superseded in 1980 after the standard gauge Tarcoola–Alice Springs Railway was opened, using a new route up to 200 km to the west. A small southern section of the original line between Port Augusta and Quorn has been preserved as the Pichi Richi Tourist Railway.

Australians generally assumed in the 1850s that railways would be built by the private sector. Private companies built railways in the then colonies of Victoria, opened in 1854, and New South Wales, where the company was taken over by the government before completion in 1855, due to bankruptcy. South Australia's railways were government owned from the beginning, including a horse-drawn line opened in 1854 and a steam-powered line opened in 1856. In Victoria, the private railways were soon found not to be financially viable, and existing rail networks and their expansion were taken over by the colony. Government ownership also enabled railways to be built to promote development, even if not apparently viable in strictly financial terms. The railway systems spread from the colonial capitals, except for a few lines that hauled commodities to a rural port.

<span class="mw-page-title-main">Rail transport in South Australia</span> Rail transport in South Australia

The first railway in colonial South Australia was a line from the port of Goolwa on the River Murray to an ocean harbour at Port Elliot, which first operated in December 1853, before its completion in May 1854.

<span class="mw-page-title-main">Trans-Australian Railway</span> Railway between Port Augusta, South Australia and Kalgoorlie, Western Australia

The Trans-Australian Railway, opened in 1917, runs from Port Augusta in South Australia to Kalgoorlie in Western Australia, crossing the Nullarbor Plain in the process. As the only rail freight corridor between Western Australia and the eastern states, the line is economically and strategically important. The railway includes the world's longest section of completely straight track.

<span class="mw-page-title-main">Eastern Goldfields Railway</span> Railway line in Western Australia

The Eastern Goldfields Railway was built in the 1890s by the Western Australian Government Railways to connect Perth with the Eastern Goldfields at Coolgardie and Kalgoorlie.

<span class="mw-page-title-main">Rail gauge in Australia</span> Narrow, standard and broad gauges of Australia

Rail gauges in Australia display significant variations, which has presented an extremely difficult problem for rail transport on the Australian continent since the 19th century. As of 2022, there are 11,914 kilometres (7,403 mi) of narrow-gauge railways, 18,007 kilometres (11,189 mi) of standard gauge railways and 2,685 kilometres (1,668 mi) of broad gauge railways. In the 19th century, each of the colonies of Australia adopted their own gauges.

<span class="mw-page-title-main">Sydney–Perth rail corridor</span> Australias east–west transcontinental railway route

The Sydney–Perth rail corridor is a 1435 mmstandard gauge railway route that runs for 4352 kilometres (2704 mi) across Australia from Sydney, New South Wales, to Perth, Western Australia. Most of the route is under the control of the Australian Rail Track Corporation.

<span class="mw-page-title-main">Commonwealth Railways NSU class</span> Narrow-gauge diesel-electric locomotive class of the former Commonwealth Railways, Australia

The Commonwealth Railways NSU class was a class of diesel-electric locomotives built in 1954 and 1955 by the Birmingham Railway Carriage and Wagon Company, England, for the Commonwealth Railways to be deployed on the narrow-gauge Central Australia Railway and North Australia Railway.

Telford Cut was an open-cut coal mine, now closed, in the Leigh Creek Coalfield in South Australia. For the 72 years between its opening in 1943 and its closure, the mine supplied sub-bituminous coal to fire power stations first in Adelaide then, from 1954, Port Augusta. Production ceased in November 2015 but stockpiled product was transported to Port Augusta until the last power station closed down in May 2016.

<i>Trans-Australian</i>

The Trans-Australian was an Australian passenger train operated by the Commonwealth Railways initially between Port Augusta and Kalgoorlie on the Trans-Australian Railway line, and later extended west to Perth, and east to Port Pirie and Adelaide.

<span class="mw-page-title-main">Port Augusta railway station</span> Railway station in South Australia

Port Augusta railway station is a rail station located on the Adelaide-Port Augusta railway line in Port Augusta, South Australia.

<span class="mw-page-title-main">Quorn railway station</span> Railway station in South Australia

Quorn railway station was located on the Central Australia Railway, and also the Peterborough-Quorn railway line serving the South Australian town of Quorn.

<span class="mw-page-title-main">Marree railway station</span> Railway station in Marree, Australia

Marree railway station was located on the Central Australia Railway, and later the Marree railway line serving the small South Australian outback town of Marree.

The Marree railway line is located in the Australian state of South Australia.

<span class="mw-page-title-main">Commonwealth Railways NDH class railcar</span>

The NDH class railcars are a class of self propelled diesel-hydraulic railcars designed by Commonwealth Engineering and built by the Gloucester Railway Carriage & Wagon Company in England for the Commonwealth Railways, Australia in 1954. They were known as Gloucester railcars.

References

  1. 1 2 3 Gigney, M.E. (November 1956). "Ways in the Wastelands". Australian Railway Historical Society Bulletin . pp. 149–160.
  2. Harvey, J.L. (August 1970). "The North Australia Railway, 1911–1939". Australian Railway Historical Society Bulletin. pp. 169–192.
  3. Harvey, J.L. (November 1970). "The North Australia Railway, 1911–1939". Australian Railway Historical Society Bulletin. pp. 241–259.
  4. Harvey, J.L. (February 1971). "The North Australia Railway, 1911–1939". Australian Railway Historical Society Bulletin. pp. 39–47.
  5. Harvey, J.L. (March 1971). "The North Australia Railway, 1911–1939". Australian Railway Historical Society Bulletin. pp. 58–65.
  6. Harvey, J.L. (April 1971). "The North Australia Railway, 1911–1939". Australian Railway Historical Society Bulletin. pp. 73–88.
  7. Bayley, William A. (June 1977). "The Closure of the North Australia Railway". Australian Railway Historical Society Bulletin. pp. 121–127.
  8. Stokes, H.J.W. (1984). Railways of the Canberra and Monaro Districts. Canberra: Australian Railway Historical Society, ACT Division.
  9. "Canberra Line Handover". Railway Digest. May 1985. p. 136.
  10. Starting point of the Great Northern Railway, South Australia, Alfred May and Alfred Martin Ebsworth, 1881, retrieved 25 November 2023
  11. Buckland, J.L. (December 1955). "The 'Pick-a-Back' Train". Australian Railway Historical Society Bulletin. pp. 157–162.
  12. Smith, Keith A. (March 2006). "Carpe Diem – Seize the Day". Australian Railway History. pp. 103–112.
  13. Castle, B.J. (February 1958). "The Stirling North-Marree Standard Gauge Railway". Australian Railway Historical Society Bulletin. pp. 17–22.
  14. World Survey of Foreign Railways. Transportation Division, Bureau of foreign and domestic commerce, Washington D.C. 1936. p. 15.
  15. "Alice to Darwin railway construction begins (transcript)". ABC 7:30 Report. 17 July 2001. Archived from the original on 6 November 2012.

Further reading