Currituck-class seaplane tender

Last updated
USS Salisburs Sound (AV-13) at San Diego Bay c1957.jpeg
USS Salisbury Sound at San Diego Bay, ca. 1957
Class overview
NameCurrituck class
Builders
OperatorsFlag of the United States.svg  United States Navy
Built1942–1944
In commission1943–1987
Planned4
Completed4
Retired4
General characteristics as built
Type Seaplane tender
Displacement15,092 long tons (15,334  t) (full load)
Length540 ft 5 in (164.72 m) oa
Beam69 ft 3 in (21.11 m)
Draft22 ft 3 in (6.78 m)
Propulsion
  • Steam turbines
  • 4 × boilers
  • 2 × shafts
  • 12,000  shp (8,900  kW)
Speed18 knots (33 km/h; 21 mph)
Complement1,247
Armament
Aviation facilities Hangar and catapult

The Currituck-class seaplane tenders were four ships built for the United States Navy during World War II. The role of a seaplane tender was to provide base facilities for squadrons of seaplanes in a similar way that an aircraft carrier does for its squadrons. While three members of the class were removed from active service in the 1960s, Norton Sound was modified to serve as a testbed for advanced radar and combat management systems, such as the Aegis Combat System.

Contents

Design and description

Currituck in 1944 USS Currituck (AV-7) off Philadelphia Navy Yard 1944.jpg
Currituck in 1944

In the interwar period, the United States Navy sought to find a cheaper alternative to the construction of airstrips on land for its air fleet. The distances required for air support, primarily in the Pacific Theater, were long and interwar naval treaties limited the size of aircraft carriers. The seaplane carrier was developed during interwar planning, with two versions being designed for use. The first design, designated AV, operated two full squadrons of patrol aircraft, provided quarters for the aircrew and repair functions. The second, designated AVP, was smaller, only capable of operating one squadron and was intended for use in shallow harbors due to their shallower draft. The Currituck class were of the first design and were also well armed as the ships were expected to provide shore defence too. The primary role of the Currituck class was reconnaissance as their mobility gave them an advantage of land-based aircraft. They also had a secondary role of bombing and torpedo attacks. [1]

As the designs developed, alternative uses for the Currituck class was envisaged, with the United States Marine Corps planning to use them for advanced base operations, flying Marine Corps dive bomber aircraft and another one saw the ships used to transport aircraft to the front lines. Both of these were rejected, with escort carriers considered a more adequate ship type for the second role. During World War II, the Currituck class were used as conventional seaplane tenders. [2]

The Currituck-class ships measured 540 feet 5 inches (164.72 m) long overall and 520 ft (160 m) at the waterline with a beam of 69 ft 3 in (21.11 m) and a maximum draft of 22 ft 3 in (6.78 m). The Curritucks had a trial displacement of 14,000 long tons (14,000  t ) and a full load displacement of 15,092 long tons (15,334 t). [3] [lower-alpha 1] The lead ship, Currituck, was powered by Parsons geared turbines, while the three others of the class were given Allis-Chalmers geared turbines. These were powered by steam created by four Babcock & Wilcox Express boilers turning two shafts creating 12,000 shaft horsepower (8,900  kW ). [5] [4] This gave the seaplane tenders a maximum speed of 19.2 knots (35.6 km/h; 22.1 mph). [3] [5] [lower-alpha 2]

The vessels had a wartime complement of 1,247 including 162 officers. During peacetime, the ship's had a complement of 553 including 30 officers. [6] The vessels had a hangar for seaplanes and could operate up to two full squadrons. They also had a flush-decked catapult, that along with a larger hangar, resulted from those alternative uses put forth for the design. [3] During World War II, the vessels were armed with four single-mounted 5-inch (127 mm)/38-caliber dual-purpose guns, three quad-mounted and four twin-mounted 1.6 in (40 mm) guns. The 1.6-inch guns were removed postwar. [6] [lower-alpha 3]

Ships in class

Pine Island in the late 1940s USS Pine Island (AV-12) late 1940s.jpg
Pine Island in the late 1940s
Currituck class construction data
Hull number NameBuilder Laid down Launched Commissioned Fate
AV-7 Currituck Philadelphia Naval Shipyard, Philadelphia, Pennsylvania11 September 1943 [7] 26 June 1944 [7] Stricken 1 April 1971 [3]
AV-11 Norton Sound Todd Shipyard, San Pedro, California 7 September 1942 [8] 28 November 1943 [8] 8 January 1945 [8] Converted to guided missile trial ship (AVM-11) 1948 [8]
AV-12 Pine Island 16 November 1942 [9] 26 February 1944 [9] 26 April 1945 [9] Stricken 1 February 1971 [3]
AV-13 Salisbury Sound (ex-Puget Sound)10 April 1943 [10] 5 June 1944 [10] 26 November 1945 [10] Sold 7 February 1972 [10]

Construction and career

Norton Sound in 1980 after conversion to trial ship USS Norton Sound (AVM-1) underway at sea, circa in 1980.jpg
Norton Sound in 1980 after conversion to trial ship

The lead ship, Currituck, was constructed at the Philadelphia Navy Yard and entered service in 1944. [7] The ship was modernized under the 1957 conversions program at the Philadelphia Naval Shipyard and re-entered service on 20 August 1960. [6] The ship was taken out of service and assigned to the Maritime Administration Reserve Fleet in 1968 after the Martin P5M Marlin aircraft were retired from naval service. [11] [6] Norton Sound, Pine Island and Salisbury Sound were all built by Todd Shipyard on the west coast and entered service by mid-1945. In 1948 Norton Sound was selected to be converted to a guided missile trials ship. The ship had its two forward 5-inch guns removed and a helicopter platform installed and also had its stern crane removed. Norton Sound was assigned to the Operation Test and Evaluation Force. The vessel carried out tests with American versions of the German V-1 flying bomb and the US Navy's Aerobee rocket, [5] the RIM-24 Tartar missile system [6] and the RIM-50 Typhon missile system. [11] In 1958 Norton Sound would be the launch platform for the Operation Argus nuclear tests in the south Atlantic. [12] Pine Island and Salisbury Sound were placed in reserve in 1967. [11] Currituck, Pine Island and Salisbury Sound were all stricken from the Naval Vessel Register in the 1970s. [3]

See also

Notes

  1. Jane's Fighting Ships of World War II has the standard displacement as 9,090 long tons (9,240 t) [4] and Blackman has it as 9,106 long tons (9,252 t). [5]
  2. Jane's Fighting Ships of World War II has the vessel's speed at just 18.5 knots (34.3 km/h; 21.3 mph). [4]
  3. The 38 caliber denotes the length of the gun. This means that the length of the gun barrel is 38 times the bore diameter.

Citations

  1. Friedman 1980, p. 156.
  2. Friedman 1980, pp. 156–157.
  3. 1 2 3 4 5 6 Friedman 1980, p. 157.
  4. 1 2 3 Jane's Fighting Ships of World War II 1995, p. 296.
  5. 1 2 3 4 Blackman 1953, p. 428.
  6. 1 2 3 4 5 Blackman 1969, p. 500.
  7. 1 2 3 Currituck II.
  8. 1 2 3 4 Norton Sound.
  9. 1 2 3 Pine Island.
  10. 1 2 3 4 Salisbury Sound.
  11. 1 2 3 Blackman 1967, p. 411.
  12. Lawson, Cliff (2017). The Station Comes of Age: Satellites, Submarines, and Special Operations in the Final Years of the Naval Ordnance Test Station, 1959–1967. Naval Air Warfare Center Weapons Division. p. 43.

Related Research Articles

The United States Navy, United States Coast Guard, and United States National Oceanic and Atmospheric Administration (NOAA) use a hull classification symbol to identify their ships by type and by individual ship within a type. The system is analogous to the pennant number system that the Royal Navy and other European and Commonwealth navies use.

<span class="mw-page-title-main">Seaplane tender</span> Boat that services aircraft landing on water

A seaplane tender is a boat or ship that supports the operation of seaplanes. Some of these vessels, known as seaplane carriers, could not only carry seaplanes but also provided all the facilities needed for their operation; these ships are regarded by some as the first aircraft carriers and appeared just before the First World War.

USS <i>Puget Sound</i> (CVE-113) Commencement Bay-class escort carrier of the US Navy

USS Puget Sound was a Commencement Bay-class escort carrier of the United States Navy. The Commencement Bay class were built during World War II, and were an improvement over the earlier Sangamon class, which were converted from oil tankers. They were capable of carrying an air group of 33 planes and were armed with an anti-aircraft battery of 5 in (127 mm), 40 mm (1.6 in), and 20 mm (0.8 in) guns. The ships were capable of a top speed of 19 knots, and due to their origin as tankers, had extensive fuel storage.

<i>Bogue</i>-class escort carrier Aircraft carrier class of the US Navy

The Bogue class were a class of 45 escort carriers built in the United States for service with the US Navy and the Royal Navy, through the Lend-Lease program, during World War II. Following the war, ten Bogue-class ships were kept in service by the US Navy and were reclassified for helicopter and aircraft transport operations.

<i>Salisbury</i>-class frigate Class of frigate of the Royal Navy

The Type 61 Salisbury class was a class of the Royal Navy aircraft direction (AD) frigate, built in the 1950s. The purpose of the aircraft direction ships was to provide radar picket duties at some distance from a carrier task force and offer interception guidance to aircraft operating in their area.

USS <i>Currituck</i> (AV-7) Currituck class seaplane tender

USS Currituck (AV-7) was the first of four Currituck class seaplane tenders, and was nicknamed the Wild Goose. She was built during World War II and served during the Cold War.

<span class="mw-page-title-main">3-inch/50-caliber gun</span> Naval gun

The 3-inch/50-caliber gun in United States naval gun terminology indicates the gun fired a projectile 3 inches (76 mm) in diameter, and the barrel was 50 calibers long. Different guns of this caliber were used by the U.S. Navy and U.S. Coast Guard from 1900 through to 1990 on a variety of combatant and transport ship classes.

HMS <i>Salisbury</i> (F32) 1957 Type 61 or Salisbury class frigate of the Royal Navy

HMS Salisbury was a Salisbury-class or Type 61 aircraft direction frigate of the British Royal Navy. Completed in the late 1950s, Salisbury served through the 1960s and 1970s, participating in the Beira Patrol, blockading against Rhodesia and the confrontation with Iceland over fishing rights that was known as the Cod Wars. Salisbury became a harbour training ship in 1980, before being sunk as a target in 1985.

<i>Highflyer</i>-class cruiser

The Highflyer-class cruisers were a group of three second-class protected cruisers built for the Royal Navy in the late 1890s.

HMCS <i>Saguenay</i> (DDH 206) Destroyer of the Royal Canadian Navy

HMCS Saguenay was a St. Laurent-class destroyer that served in the Royal Canadian Navy and later the Canadian Forces from 1956–1990. She was the second vessel in her class and the second Canadian naval unit to carry the name HMCS Saguenay. After being discarded by the Canadian Forces, the ship was sunk as an artificial reef off the coast of Nova Scotia.

<span class="mw-page-title-main">Aircraft cruiser</span> Type of warship

The aircraft cruiser is a warship that combines the features of the aircraft carrier and a surface warship such as a cruiser or battleship.

HMS <i>Empress</i> (1914) Seaplane carrier for the Royal Navy

HMS Empress was a seaplane carrier of the Royal Navy (RN) that served during the First World War. Converted from the Cross-Channel packet ship Empress, the ship's aircraft conducted aerial reconnaissance, observation and bombing missions in the North Sea and Eastern Mediterranean. During the last year of the war, she conducted anti-submarine patrols in the Mediterranean. Empress was returned to her owners in 1919 and was then sold to a French company in 1923. She was scrapped in 1933.

USS <i>Barataria</i> (AVP-33) Tender of the United States Navy

The second USS Barataria (AVP-33) was a United States Navy Barnegat-class seaplane tender in commission from 1944 to 1946. She saw service in the later stages of World War II and was decommissioned postwar. She then was transferred to the United States Coast Guard and was in commission as the Coast Guard cutter USCGC Barataria (WAVP-381), later WHEC-381 from 1949 to 1969, serving in the Cuban Missile Crisis and the Vietnam War during her lengthy Coast Guard career.

Japanese seaplane tender <i>Akitsushima</i> Ship of the Imperial Japanese Navy

Akitsushima (秋津洲) was a seaplane tender of the Imperial Japanese Navy (IJN), serving during World War II from 1942 until being sunk in September 1944.

<i>Ashland</i>-class dock landing ship

The Ashland-class dock landing ship were the first class of dock landing ship of the United States Navy. They were built during World War II. A dock landing ship is a form of auxiliary warship designed to support amphibious operations. Eight ships were built for the United States Navy and they remained in US service until the 1960s. Two of the class were sold for export overseas, with one joining the Republic of China Navy and the other the Argentinian Navy. The two transferred ships stayed in service until the 1980s. All eight ships were scrapped.

<i>Hamul</i>-class destroyer tender

The Hamul class were a class of destroyer tenders that were initially constructed as attack cargo ships for the United States Navy during World War II. They operated from 1941 to 1969.

<span class="mw-page-title-main">Flight deck cruiser</span> Proposed American aircraft cruiser

The flight-deck cruiser was a proposed type of aircraft cruiser,, designed by the United States Navy during the Interwar period. Several designs were proposed for the type, but none was approved for construction. The final design was developed just before World War II, and the entry of the United States into the war saw the project come to an end.

<span class="mw-page-title-main">Aircraft repair ship</span> Ship used to provide maintenance support to aircraft

Aircraft repair ship is a naval auxiliary ship designed to provide maintenance support to aircraft. Aircraft repair ships provide similar services to seaplane tenders, that also cared for the crew. Aircraft repair ships had their own stores of spare parts, like a depot ship. Aircraft repair ships had repair personnel and equipment to repair failures or battle damage on aircraft. Aircraft repair ships also did regular aircraft maintenance.

References