DB Class VT 24

Last updated
DB class 624 / 634
Db-624668-01.jpg
A class 624 at Oldenburg main station
Type and origin
Power typeDiesel-hydraulic
Builder MAN AG, Waggonfabrik Uerdingen
Build date1961 (prototypes)
1964-1968 (regular)
Specifications
Configuration:
   AAR B'2' + 2'2' + 2'B'
(standard configuration)
Gauge 1,435 mm (4 ft 8+12 in)
Axle load 12 t (12 long tons; 13 short tons)
Prime mover MAN
Engine type Diesel engine
Performance figures
Maximum speed120 km/h (75 mph) (class 624)
140 km/h (87 mph) (class 634)
Power output2x 331 kW (450 PS; 444 hp)
Career
Operators Deutsche Bahn, PKP, Transferoviar Calatori
Locale Germany
Poland Romania
Retired2005

Class 624 and class 634 are types of diesel multiple unit, originally operated by Deutsche Bahn.

Contents

Development

Whereas during the first years after World War II the focus of the Deutsche Bundesbahn was on repairs of rolling stock, lines and buildings, with the beginning of the 1950s attention shifted to renewal of the trains. For passenger services on not electrified lines, the first prototypes of main line diesel locomotives such as the class 220 were commissioned in 1953. Subsequently, DB ordered the rail industry to develop new DMUs in order to replace pre-war classes and steam traction.

In 1961 MAN and Waggonfabrik Uerdingen both delivered two prototypes each. Even though they were quite similar, they can be distinguished easily by the different front design. DB put the prototypes into service as class VT 23.5 (MAN) and class VT 24.5 (Uerdingen). After the new numbering scheme the prototypes were listed as class 624 together with the regular units. The prototypes underwent intensive tests, including comparison to conventional push/pull trains with DB Class V 100.

The regular trainsets were delivered from 1964 to 1968 and were produced jointly by both manufacturers. Only minor changes were made to the prototype design. A total of 80 front cars and 55 middle cars were delivered, allowing the use of 40 three-part or two-part trainsets. Starting in 1968, a number of units were equipped with pneumatic shock absorption and passive tilting systems. These units were listed as class 634 and approved for a higher speed of 140 km/h. As the tilting system turned out to be of limited use, clearance allowing only very limited tilting, in 1979 the tilting system was removed. [1]

In 1970 a number of trainsets derived from class 624 were delivered to Yugoslavia (Slovenia) as SŽ series 711. They are still in use by Slovenian Railways.

Service

Upon entering service the new class 624 units were often used for fast regional and express trains in various parts of Germany. This changed gradually and by 1980 nearly all of the units were based in Osnabrück and Braunschweig, employed on regional and local lines. Regional and local passenger traffic in the Harz region was carried out almost exclusively by these trainsets.

Whereas the successor class 614 units supplemented DB's DMU fleet, the class 628.2 regular types coming into service after 1986 began to displace class 624 into subordinate services. Retirement of class 624/634 trainsets started in 2003, when DB lost a couple of tender procedures to private companies and modern light-weight DMUs came into service in large numbers. The last class 624/634 units were retired in 2005.

Fourteen trainsets were sold to Poland's PKP as Class SA110 and had been in use in regional and local service. [2]

In Romania, several class 624 units are in service with Transferoviar Grup.

Technical information

Only the front cars were motorised, therefore the trainsets could be assembled either with or without up to two middle cars. Up to three trainsets (i.e. six engines) could be operated as multiple traction, connected by Scharfenberg couplers, which were also used to connect front and middle cars. Each front car was equipped with a 331 kW MAN diesel engine, the power being transferred hydro-dynamically to the front-end bogie.

The passenger compartment's layout was derived from the so-called Silberling (silverling) polished stainless steel short-line passenger coaches, with open-plan compartments. The trains had oil heating.

The Class 624/634 was compatible with its successor DB Class 614, so all units could be in mixed plans, including mixed use of middle cars.

Related Research Articles

<span class="mw-page-title-main">Diesel multiple unit</span> Diesel-powered railcar designed to be used in formations of 2 or more cars

A diesel multiple unit or DMU is a multiple-unit train powered by on-board diesel engines. A DMU requires no separate locomotive, as the engines are incorporated into one or more of the carriages. Diesel-powered single-unit railcars are also generally classed as DMUs. Diesel-powered units may be further classified by their transmission type: diesel–mechanical DMMU, diesel–hydraulic DHMU, or diesel–electric DEMU.

<span class="mw-page-title-main">Multiple unit</span> Self-propelled train

A multiple-unit train or simply multiple unit (MU) is a self-propelled train composed of one or more carriages joined, which when coupled to another multiple unit can be controlled by a single driver, with multiple-unit train control.

<span class="mw-page-title-main">Tilting train</span> Type of train that can tilt in curves

A tilting train is a train that has a mechanism enabling increased speed on regular rail tracks. As a train rounds a curve at speed, objects inside the train experience centrifugal force. This can cause packages to slide about or seated passengers to feel squashed by the outboard armrest, and standing passengers to lose their balance, or in such excessive speeds, could even cause the train to derail. Tilting trains are designed to counteract this by tilting the carriages towards the inside of the curve, thus compensating for the g-force. The train may be constructed such that inertial forces cause the tilting, or it may have a computer-controlled powered mechanism.

<span class="mw-page-title-main">Siemens Desiro</span> Family of diesel and electric multiple units from Siemens

The Siemens Desiro is a family of diesel or electric multiple unit passenger trains developed by Siemens Mobility, a division of the German Siemens AG conglomerate. The main variants are the Desiro Classic, Desiro ML, Desiro UK and the later Desiro City, Desiro HC and Desiro RUS. The trains are mostly used for commuter and regional services, and their rapid acceleration makes them suitable for services with short distances between stations. The design is flexible, and has become common in many European countries.

<span class="mw-page-title-main">Power car</span> Type of rail vehicle

In rail transport, the expression power car may refer to either of two distinct types of rail vehicle:

<span class="mw-page-title-main">ICE 1</span> German high-speed train type

The ICE 1 is the first batch-produced German high-speed train and one of six in the Intercity Express family. Revenue service at speeds up to 250 km/h (155 mph) started in 1991. It was raised to 280 km/h (175 mph) in May 1995 and temporary reduced to 250 km/h (155 mph) again, as a result of the Eschede accident.

<span class="mw-page-title-main">Stadler GTW</span> Articulated railcar

The Stadler GTW is an articulated railcar for local transport made by Stadler Rail of Switzerland. GTW stands for Gelenktriebwagen.

<span class="mw-page-title-main">Control car</span> Unpowered railway or tramway car with a drivers cab

A control car, cab car, control trailer, or driving trailer is a non-powered rail vehicle from which a train can be operated. As dedicated vehicles or regular passenger cars, they have one or two driver compartments with all the controls and gauges required to remotely operate the locomotive, including exterior locomotive equipment such as horns, bells, ploughs, and lights. They also have communications and safety systems such as GSM-R or European Train Control System (ETCS). Control cars enable push-pull operation when located on the end of a train opposite its locomotive by allowing the train to reverse direction at a terminus without moving the locomotive or turning the train around.

<span class="mw-page-title-main">DB Class VT 12.5</span>

The VT 125 is a former diesel multiple unit commissioned by the Deutsche Bundesbahn from 1953 onwards. It was commonly used with either two or three car configurations, using the VM 12 middle car and VS 12 driving van trailer. Three-car trains were usually made up of two motor units and one unpowered middle car. The trainsets were routinely made up from twelve driving cars, four control cars and 13 middle cars and used in city express services. The VT 125 was used in regional traffic, with first and second class saloon seating. From 1968 the VT 125 bore the EDV class number 612, the VT 126 was redesignated as the Class 613. After initially operating from Cologne and Dortmund the DMUs were based for many years at the Hamburg-Altona railway depot and, from 1982, stationed at the Brunswick depot.

<span class="mw-page-title-main">DRG Class SVT 137</span>

The DRG Class SVT 137 was a class of streamlined diesel railcars of the Deutsche Reichsbahn-Gesellschaft and later of the Deutsche Bundesbahn and the Deutsche Reichsbahn. With a regular maximum speed of 160 km/h (99 mph) and average speeds of up to 132 km/h (82 mph) they were the first high speed trains in central Europe.

<span class="mw-page-title-main">Bombardier RegioSwinger</span>

The RegioSwinger is a tilting diesel multiple unit (DMU) passenger train used for fast regional traffic on unelectrified lines.

<span class="mw-page-title-main">Alstom Coradia</span> Family of diesel and electric multiple units

The Alstom Coradia is a family of diesel and electric multiple units for intercity and regional service manufactured by Alstom, with variants operating in Europe, North America, and Africa.

<span class="mw-page-title-main">Stadler FLIRT</span> Swiss built multiple unit passenger trainset

Stadler FLIRT is a passenger multiple unit trainset made by Stadler Rail of Switzerland. The baseline design of FLIRT is an electric multiple unit articulated trainset that can come in units of two to twelve cars with two to six motorized axles. The maximum speed is 200 km/h (125 mph). Standard floor height is 57 cm, but 78 cm high floors are also available for platform heights of 76 cm.

<span class="mw-page-title-main">Uerdingen railbus</span> German diesel multiple unit railcar

The Uerdingen railbus is the common term for the multiple units which were developed by the German firm of Waggonfabrik Uerdingen for the Deutsche Bundesbahn and private railways after the Second World War. These vehicles were diesel-powered, twin-axle railbuses of light construction. The diesel motors were built into the chassis underneath the vehicle. The VT 95 and VT 98 of the former Deutsche Bundesbahn in particular, are associated with this concept. These vehicles were employed in passenger train duties on branch lines where steam or diesel train operations were less profitable. Including the units built under licence, a total of 1,492 power cars were built from 1950 to 1971; and the total number of units, including trailer and driving cars, was 3,306.

<span class="mw-page-title-main">ICE T</span> High-speed German tilting train

DBAG Class 411 and Class 415 are German tilting electric multiple-unit high-speed trains in service with DB Fernverkehr, commonly known as ICE T.

<span class="mw-page-title-main">ICE TD</span> Diesel multiple unit train type

The DBAG Class 605, commonly known as the ICE TD is a high-speed diesel multiple unit (DMU) train, formerly in service with Deutsche Bahn and DSB.

<span class="mw-page-title-main">DB Class 614</span>

The DB Class 614s are German diesel multiple units operated by the Deutsche Bundesbahn, comprising two Class 614 driving units and up to two Class 914 centre cars. On 1 January 1994 the ownership of these vehicles was transferred to the DB's legal successor Deutsche Bahn and its subsidiaries or business areas.

<span class="mw-page-title-main">British railcars and diesel multiple units</span> Network_Rail

Diesel multiple units and railcars are trains, usually with passenger accommodation, that do not require a locomotive. Railcars can be single cars, while in multiple units cars are marshalled together with a driving position either end. As of December 2010, 23 percent of the rail passenger cars used on Network Rail are part of a diesel multiple unit.

<span class="mw-page-title-main">DSB class MR</span>

The class MR and class MRD are classes of diesel multiple units (DMUs) built for the Danish State Railways (DSB). Delivered between 1978 and 1985, they have seen use primarily in regional passenger service. A total of 97 trainsets were built, initially by Waggonfabrik Uerdingen and later Scandia.

References

  1. Private Website with detailed information [ permanent dead link ]
  2. Local newspaper on transfer to Poland