The Denso MapCode system is a spatial reference system (not to be confused with the international mapcode system, a different spatial reference system). Denso MapCodes are 7- to 10-digit codes identifying specific 900-square-meter areas in Japan.
The Denso MapCode system is a spatial reference system (not to be confused with the international mapcode system, a different spatial reference system). Denso MapCodes are 7- to 10-digit codes identifying specific 900-square-meter areas in Japan.
The Denso MapCode system was developed in 1997 by Denso Corporation for easy identification of any location in Japan by Japanese navigation systems. Car navigation systems are unable to identify locations for which addresses or telephone numbers are not available or house numbers, like in Japan, are not sequential. The Denso MapCode system enables accurate pinpointing by number, predetermined according to latitude and longitude. [1]
The use of MapCodes is free to end users but corporations wanting to commercialise it will need to sign a contract with Denso and pay a fee. In Japan, car navigation system suppliers such as Denso itself, Clarion, Kenwood, Fujitsu Ten, Sony, Panasonic, Pioneer and Alpine Electronics have adopted the system and Toyota, Honda, Nissan, Fuji Heavy Industries, BMW Japan, General Motors Japan, Jaguar Japan and Land Rover Japan have introduced it in their vehicles. [2]
The Denso MapCode system divided Japan into 1162 zones, each zone into 900 blocks, and each block into 900 areas. A Denso MapCode number consists of the zone number (up to 4 digits), the block number (always 3 digits) and the area number (always 3 digits), a numeric code of up to 10 digits.
As the MapCode numbers proved too coarse for certain situations (this first version identified an area with a radius of about 100 meters [3] ), the system was extended in 2004: by adding an asterisk and two extra digits, a specific cell of 9 square meters can be identified within an area. The design of the division in blocks is graphically explained on the website of Denso. [4]
Unfortunately, neither Garmin nor TomTom publish their own car navigation maps for Japan, [5] although a third-party map for Garmin is available from UUD. [6] Nowadays Japanese car rental companies offer on request at the time of reservation a rental car with a multi-language car navigation system. Navigation is not usually done by entering the destination street address, but by entering the telephone number or the Denso MapCode of the destination address. [7]
Before August 2016, finding a Denso MapCode of a Japanese address involved 6 steps on the website http://mapion.co.jp in the Japanese language. [8] [9] Luckily, the new alternative http://japanmapcode.com/en works pretty much like Google maps and displays the mapcode for any address or GPS-coordinate entered. You can even point at a location on the map and the website displays the address and mapcode.
Furthermore, on October 18th 2016, Denso has launched the free smartphone app Drive! Nippon, for iOS and Android. [10] This app, bilingual in Japanese and English, will show the MapCode if you know the street address of GPS-coordinate. If you point at a location on the map, it will show the street address and GPS-coordinate and produces the MapCode. Internet connection is required.
A postal code is a series of letters or digits or both, sometimes including spaces or punctuation, included in a postal address for the purpose of sorting mail.
A waypoint is an intermediate point or place on a route or line of travel, a stopping point or point at which course is changed, the first use of the term tracing to 1880. In modern terms, it most often refers to coordinates which specify one's position on the globe at the end of each "leg" (stage) of an air flight or sea passage, the generation and checking of which are generally done computationally.
A projected coordinate system, also known as a projected coordinate reference system, a planar coordinate system, or grid reference system, is a type of spatial reference system that represents locations on the Earth using cartesian coordinates (x,y) on a planar surface created by a particular map projection. Each projected coordinate system, such as "Universal Transverse Mercator WGS 84 Zone 26N," is defined by a choice of map projection, a choice of geodetic datum to bind the coordinate system to real locations on the earth, an origin point, and a choice of unit of measure. Hundreds of projected coordinate systems have been specified for various purposes in various regions.
A geocode is a code that represents a geographic entity. It is a unique identifier of the entity, to distinguish it from others in a finite set of geographic entities. In general the geocode is a human-readable and short identifier.
A telephone numbering plan is a type of numbering scheme used in telecommunication to assign telephone numbers to subscriber telephones or other telephony endpoints. Telephone numbers are the addresses of participants in a telephone network, reachable by a system of destination code routing. Telephone numbering plans are defined in each of the administrative regions of the public switched telephone network (PSTN) and in private telephone networks.
Traffic Message Channel (TMC) is a technology for delivering traffic and travel information to motor vehicle drivers. It is digitally coded using the ALERT C or TPEG protocol into Radio Data System (RDS) carried via conventional FM radio broadcasts. It can also be transmitted on Digital Audio Broadcasting or satellite radio. TMC allows silent delivery of dynamic information suitable for reproduction or display in the user's language without interrupting audio broadcast services. Both public and commercial services are operational in many countries. When data is integrated directly into a navigation system, traffic information can be used in the system's route calculation.
An address is a collection of information, presented in a mostly fixed format, used to give the location of a building, apartment, or other structure or a plot of land, generally using political boundaries and street names as references, along with other identifiers such as house or apartment numbers and organization name. Some addresses also contain special codes, such as a postal code, to make identification easier and aid in the routing of mail.
An automotive navigation system is part of the automobile controls or a third party add-on used to find direction in an automobile. It typically uses a satellite navigation device to get its position data which is then correlated to a position on a road. When directions are needed routing can be calculated. On the fly traffic information can be used to adjust the route.
The Military Grid Reference System (MGRS) is the geocoordinate standard used by NATO militaries for locating points on Earth. The MGRS is derived from the Universal Transverse Mercator (UTM) grid system and the Universal Polar Stereographic (UPS) grid system, but uses a different labeling convention. The MGRS is used as geocode for the entire Earth.
Address geocoding, or simply geocoding, is the process of taking a text-based description of a location, such as an address or the name of a place, and returning geographic coordinates, frequently latitude/longitude pair, to identify a location on the Earth's surface. Reverse geocoding, on the other hand, converts geographic coordinates to a description of a location, usually the name of a place or an addressable location. Geocoding relies on a computer representation of address points, the street / road network, together with postal and administrative boundaries.
DENSO Corporation is a global automotive components manufacturer headquartered in the city of Kariya, Aichi Prefecture, Japan.
A point of interest (POI) is a specific point location that someone may find useful or interesting. An example is a point on the Earth representing the location of the Eiffel Tower, or a point on Mars representing the location of its highest mountain, Olympus Mons. Most consumers use the term when referring to hotels, campsites, fuel stations or any other categories used in modern automotive navigation systems.
The United States National Grid (USNG) is a multi-purpose location system of grid references used in the United States. It provides a nationally consistent "language of location", optimized for local applications, in a compact, user friendly format. It is similar in design to the national grid reference systems used in other countries. The USNG was adopted as a national standard by the Federal Geographic Data Committee (FGDC) of the US Government in 2001.
Magellan Navigation, Inc. is an American producer of consumer and professional grade global positioning system receivers, named after Ferdinand Magellan, the first explorer to circumnavigate the globe. Headquartered in San Dimas, California, with European sales and engineering centers in Nantes, France and Moscow, Russia, Magellan also produces aftermarket automotive GPS units, including the Hertz Neverlost system found in Hertz rental cars. The Maestro, RoadMate, Triton, and eXplorist lines are Magellan's current consumer offerings. The company also produces proprietary road maps (DirectRoute), topographic maps (Topo), and marine charts (BlueNav) for use with its consumer GPS receivers.
Map database management systems are software programs designed to efficiently store and recall spatial information. They are widely used in localization and navigation, especially in automotive applications. Moreover, they are playing an increasingly important role in the emerging areas of location-based services, active safety functions and advanced driver-assistance systems. Common to these functions is the requirement for an on-board map database that contains information describing the road network.
A satellite navigation device, colloquially called a GPS receiver, or simply a GPS, is a device that is capable of receiving information from GNSS satellites and then calculate the device's geographical position. Using suitable software, the device may display the position on a map, and it may offer routing directions. The Global Positioning System (GPS) is one of a handful of global navigation satellite systems (GNSS) made up of a network of a minimum of 24, but currently 30, satellites placed into orbit by the U.S. Department of Defense.
Digital mapping is the process by which a collection of data is compiled and formatted into a virtual image. The primary function of this technology is to produce maps that give accurate representations of a particular area, detailing major road arteries and other points of interest. The technology also allows the calculation of distances from one place to another.
The mapcode system is an open-source geocode system consisting of two groups of letters and digits, separated by a dot. It represents a location on the surface of the Earth, within the context of a separately specified country or territory. For example, the entrance to the elevator of the Eiffel Tower in Paris is “France 4J.Q2”. As with postal addresses, it is often unnecessary to explicitly mention the country.
What3words is a proprietary geocode system designed to identify any location with a resolution of about 3 metres (9.8 ft). It is owned by What3words Limited, based in London, England. The system encodes geographic coordinates into three permanently fixed dictionary words. For example, the front door of 10 Downing Street in London is identified by ///slurs.this.shark.
The Open Location Code (OLC) is a geocode system for identifying an area anywhere on the Earth. It was developed at Google's Zürich engineering office, and released late October 2014. Location codes created by the OLC system are referred to as "plus codes".