Diathermal wall

Last updated

In thermodynamics, a diathermal wall between two thermodynamic systems allows heat transfer but does not allow transfer of matter across it. [1]

Contents

The diathermal wall is important because, in thermodynamics, it is customary to assume a priori, for a closed system, the physical existence of transfer of energy across a wall that is impermeable to matter but is not adiabatic, transfer which is called transfer of energy as heat, though it is not customary to label this assumption separately as an axiom or numbered law. [2]

Definitions of transfer of heat

In theoretical thermodynamics, respected authors vary in their approaches to the definition of quantity of heat transferred. There are two main streams of thinking. One is from a primarily empirical viewpoint (which will here be referred to as the thermodynamic stream), to define heat transfer as occurring only by specified macroscopic mechanisms; loosely speaking, this approach is historically older. The other (which will here be referred to as the mechanical stream) is from a primarily theoretical viewpoint, to define it as a residual quantity calculated after transfers of energy as macroscopic work, between two bodies or closed systems, have been determined for a process, so as to conform with the principle of conservation of energy or the first law of thermodynamics for closed systems; this approach grew in the twentieth century, though was partly manifest in the nineteenth. [3]

Thermodynamic stream of thinking

In the thermodynamic stream of thinking, the specified mechanisms of heat transfer are conduction and radiation. These mechanisms presuppose recognition of temperature; empirical temperature is enough for this purpose, though absolute temperature can also serve. In this stream of thinking, quantity of heat is defined primarily through calorimetry. [4] [5] [6] [7]

Though its definition of them differs from that of the mechanical stream of thinking, the empirical stream of thinking nevertheless presupposes the existence of adiabatic enclosures. It defines them through the concepts of heat and temperature. These two concepts are coordinately coherent in the sense that they arise jointly in the description of experiments of transfer of energy as heat. [8]

Mechanical stream of thinking

In the mechanical stream of thinking about closed systems, heat transferred is defined as a calculated residual amount of energy transferred after the energy transferred as work has been determined, assuming for the calculation the law of conservation of energy, without reference to the concept of temperature. [9] [2] [10] [11] [12] [13] There are five main elements of the underlying theory.

Axiomatic presentations of this stream of thinking vary slightly, but they intend to avoid the notions of heat and of temperature in their axioms. It is essential to this stream of thinking that heat is not presupposed as being measurable by calorimetry. It is essential to this stream of thinking that, for the specification of the thermodynamic state of a body or closed system, in addition to the variables of state called deformation variables, there be precisely one extra real-number-valued variable of state, called the non-deformation variable, though it should not be axiomatically recognized as an empirical temperature, even though it satisfies the criteria for one.

Accounts of the diathermal wall

As mentioned above, a diathermal wall may pass energy as heat by thermal conduction, but not the matter. A diathermal wall can move and thus be a part of a transfer of energy as work. Amongst walls that are impermeable to matter, diathermal and adiabatic walls are contraries.

For radiation, some further comments may be useful.

In classical thermodynamics, one-way radiation, from one system to another, is not considered. Two-way radiation between two systems is one of the two mechanisms of transfer of energy as heat. It may occur across a vacuum, with the two systems separated from the intervening vacuum by walls that are permeable only to radiation; such an arrangement fits the definition of a diathermal wall. The balance of radiative transfer is transfer of heat.

In thermodynamics, it is not necessary that the radiative transfer of heat be of pure black-body radiation, nor of incoherent radiation. Of course black-body radiation is incoherent. Thus laser radiation counts in thermodynamics as a one-way component of two-way radiation that is heat transfer. Also, by the [Helmholtz reciprocity] principle, the target system radiates into the laser source system, though of course relatively weakly compared with the laser light. According to Planck, an incoherent monochromatic beam of light transfers entropy and has a temperature. [14] For a transfer to qualify as work, it must be reversible in the surroundings, for example in the concept of a reversible work reservoir. Laser light is not reversible in the surroundings and is therefore a component of transfer of energy as heat, not work.

In radiative transfer theory, one-way radiation is considered. For investigation of Kirchhoff's law of thermal radiation the notions of absorptivity and emissivity are necessary, and they rest on the idea of one-way radiation. These things are important for the study of the Einstein coefficients, which relies partly on the notion of thermodynamic equilibrium.

For the thermodynamic stream of thinking, the notion of empirical temperature is coordinately presupposed in the notion of heat transfer for the definition of an adiabatic wall. [8]

For the mechanical stream of thinking, the exact way in which the walls are defined is important.

In the presentation of Carathéodory, it is essential that the definition of the adiabatic wall should in no way depend upon the notions of heat or temperature. [2] This is achieved by careful wording and reference to transfer of energy only as work. Buchdahl is careful in the same way. [12] Nevertheless, Carathéodory explicitly postulates the existence of walls that are permeable only to heat, that is to say impermeable to work and to matter, but still permeable to energy in some unspecified way; they are called diathermal walls. One might be forgiven for inferring from this that heat is energy in transfer across walls permeable only to heat, and that such are admitted to exist unlabeled as postulated primitives.

The mechanical stream of thinking thus regards the adiabatic enclosure's property of not allowing the transfer of heat across itself as a deduction from the Carathéodory axioms of thermodynamics, and regards transfer as heat as a residual rather than a primary concept.

Related Research Articles

<span class="mw-page-title-main">Adiabatic process</span> Thermodynamic process in which no mass or heat is exchanged with surroundings

In thermodynamics, an adiabatic process is a type of thermodynamic process that occurs without transferring heat or mass between the thermodynamic system and its environment. Unlike an isothermal process, an adiabatic process transfers energy to the surroundings only as work. As a key concept in thermodynamics, the adiabatic process supports the theory that explains the first law of thermodynamics.

<span class="mw-page-title-main">Thermodynamics</span> Physics of heat, work, and temperature

Thermodynamics is a branch of physics that deals with heat, work, and temperature, and their relation to energy, entropy, and the physical properties of matter and radiation. The behavior of these quantities is governed by the four laws of thermodynamics which convey a quantitative description using measurable macroscopic physical quantities, but may be explained in terms of microscopic constituents by statistical mechanics. Thermodynamics applies to a wide variety of topics in science and engineering, especially physical chemistry, biochemistry, chemical engineering and mechanical engineering, but also in other complex fields such as meteorology.

<span class="mw-page-title-main">Second law of thermodynamics</span> Physical law for entropy and heat

The second law of thermodynamics is a physical law based on universal experience concerning heat and energy interconversions. One simple statement of the law is that heat always moves from hotter objects to colder objects, unless energy in some form is supplied to reverse the direction of heat flow. Another definition is: "Not all heat energy can be converted into work in a cyclic process."

<span class="mw-page-title-main">First law of thermodynamics</span> Law of thermodynamics distinguishing heat, work, and matter transfers

The first law of thermodynamics is a formulation of the law of conservation of energy, adapted for thermodynamic processes. A simple formulation is: "The total energy in a system remains constant, although it may be converted from one form to another." Another common phrasing is that "energy can neither be created nor destroyed". While there are many subtleties and implications that may be more precisely captured in more complex formulations, this is the essential principle of the First Law.

<span class="mw-page-title-main">Planck's law</span> Spectral density of light emitted by a black body

In physics, Planck's law describes the spectral density of electromagnetic radiation emitted by a black body in thermal equilibrium at a given temperature T, when there is no net flow of matter or energy between the body and its environment.

<span class="mw-page-title-main">Zeroth law of thermodynamics</span> Physical law for definition of temperature

The zeroth law of thermodynamics is one of the four principal laws of thermodynamics. It provides an independent definition of temperature without reference to entropy, which is defined in the second law. The law was established by Ralph H. Fowler in the 1930s, long after the first, second, and third laws were widely recognized.

Thermodynamic equilibrium is an axiomatic concept of thermodynamics. It is an internal state of a single thermodynamic system, or a relation between several thermodynamic systems connected by more or less permeable or impermeable walls. In thermodynamic equilibrium, there are no net macroscopic flows of matter nor of energy within a system or between systems. In a system that is in its own state of internal thermodynamic equilibrium, no macroscopic change occurs.

<span class="mw-page-title-main">Thermodynamic system</span> Body of matter in a state of internal equilibrium

A thermodynamic system is a body of matter and/or radiation, considered as separate from its surroundings, and studied using the laws of thermodynamics. Thermodynamic systems may be isolated, closed, or open. An isolated system exchanges no matter or energy with its surroundings, whereas a closed system does not exchange matter but may exchange heat and experience and exert forces. An open system can interact with its surroundings by exchanging both matter and energy. The physical condition of a thermodynamic system at a given time is described by its state, which can be specified by the values of a set of thermodynamic state variables. A thermodynamic system is in thermodynamic equilibrium when there are no macroscopically apparent flows of matter or energy within it or between it and other systems.

<span class="mw-page-title-main">Thermal equilibrium</span> State of no net thermal energy flow between two connected systems

Two physical systems are in thermal equilibrium if there is no net flow of thermal energy between them when they are connected by a path permeable to heat. Thermal equilibrium obeys the zeroth law of thermodynamics. A system is said to be in thermal equilibrium with itself if the temperature within the system is spatially uniform and temporally constant.

<span class="mw-page-title-main">Non-equilibrium thermodynamics</span> Branch of thermodynamics

Non-equilibrium thermodynamics is a branch of thermodynamics that deals with physical systems that are not in thermodynamic equilibrium but can be described in terms of macroscopic quantities that represent an extrapolation of the variables used to specify the system in thermodynamic equilibrium. Non-equilibrium thermodynamics is concerned with transport processes and with the rates of chemical reactions.

<span class="mw-page-title-main">Laws of thermodynamics</span> Observational basis of thermodynamics

The laws of thermodynamics are a set of scientific laws which define a group of physical quantities, such as temperature, energy, and entropy, that characterize thermodynamic systems in thermodynamic equilibrium. The laws also use various parameters for thermodynamic processes, such as thermodynamic work and heat, and establish relationships between them. They state empirical facts that form a basis of precluding the possibility of certain phenomena, such as perpetual motion. In addition to their use in thermodynamics, they are important fundamental laws of physics in general, and are applicable in other natural sciences.

A property of a physical system, such as the entropy of a gas, that stays approximately constant when changes occur slowly is called an adiabatic invariant. By this it is meant that if a system is varied between two end points, as the time for the variation between the end points is increased to infinity, the variation of an adiabatic invariant between the two end points goes to zero.

<span class="mw-page-title-main">Isolated system</span> Physical systems that dont interact with other parts of the universe

In physical science, an isolated system is either of the following:

  1. a physical system so far removed from other systems that it does not interact with them.
  2. a thermodynamic system enclosed by rigid immovable walls through which neither mass nor energy can pass.
<span class="mw-page-title-main">Thermodynamic state</span> Quantifiable conditions of a thermodynamic system at a specific time

In thermodynamics, a thermodynamic state of a system is its condition at a specific time; that is, fully identified by values of a suitable set of parameters known as state variables, state parameters or thermodynamic variables. Once such a set of values of thermodynamic variables has been specified for a system, the values of all thermodynamic properties of the system are uniquely determined. Usually, by default, a thermodynamic state is taken to be one of thermodynamic equilibrium. This means that the state is not merely the condition of the system at a specific time, but that the condition is the same, unchanging, over an indefinitely long duration of time.

<span class="mw-page-title-main">Thermodynamic process</span> Passage of a system from an initial to a final state of thermodynamic equilibrium

Classical thermodynamics considers three main kinds of thermodynamic process: (1) changes in a system, (2) cycles in a system, and (3) flow processes.

<span class="mw-page-title-main">Work (thermodynamics)</span> Type of energy transfer

In thermodynamics, work is one of the principal processes by which a thermodynamic system can interact with its surroundings and exchange energy. An exchange of energy is facilitated by a mechanism through which the system can spontaneously exert macroscopic forces on its surroundings, or vice versa. In the surroundings, this mechanical work can lift a weight, for example.

<span class="mw-page-title-main">Heat</span> Type of energy transfer

In thermodynamics, heat is defined as the form of energy crossing the boundary of a thermodynamic system by virtue of a temperature difference across the boundary. A thermodynamic system does not contain heat. Nevertheless, the term is also often used to refer to the thermal energy contained in a system as a component of its internal energy and that is reflected in the temperature of the system. For both uses of the term, heat is a form of energy.

<span class="mw-page-title-main">Temperature</span> Physical quantity that expresses hot and cold

Temperature is a physical quantity that expresses quantitatively the perceptions of hotness and coldness. Temperature is measured with a thermometer.

In thermodynamics, an adiabatic wall between two thermodynamic systems does not allow heat or chemical substances to pass across it, in other words there is no heat transfer or mass transfer.

A thermodynamic operation is an externally imposed manipulation that affects a thermodynamic system. The change can be either in the connection or wall between a thermodynamic system and its surroundings, or in the value of some variable in the surroundings that is in contact with a wall of the system that allows transfer of the extensive quantity belonging that variable. It is assumed in thermodynamics that the operation is conducted in ignorance of any pertinent microscopic information.

References

  1. ↑ "What are Diathermal walls, Diabatic Walls, and Adiabatic Walls?". BYJUS. Retrieved 2021-03-06.
  2. 1 2 3 Carathéodory, C. (1909).
  3. ↑ Bailyn, M. (1994), p. 79.
  4. ↑ Maxwell, J.C. (1871), Chapter III.
  5. ↑ Planck, M. (1897/1903), p. 33.
  6. ↑ Kirkwood & Oppenheim (1961), p. 16.
  7. ↑ Beattie & Oppenheim (1979), Section 3.13.
  8. 1 2 Planck. M. (1897/1903).
  9. ↑ Bryan, G.H. (1907), p. 47.
  10. ↑ Born, M. (1921).
  11. ↑ Guggenheim, E.A. (1965), p. 10.
  12. 1 2 Buchdahl, H.A. (1966), p. 43.
  13. ↑ Haase, R. (1971), p. 25.
  14. ↑ Planck. M. (1914), Chapter IV.

Bibliography

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.