Evans balance

Last updated
136834 Evans-balance.jpg

An Evans balance, also referred to as a Johnson-Matthey Magnetic Susceptibility Balance, is a device to measure the magnetic susceptibility of solids and liquids. [1] [2] Magnetic susceptibility is related to the force experienced by a substance inside a magnetic field. Different types of devices can be used to measure this magnetic susceptibility, modifying both the shape of the magnetic field inside as well as the method by which the force is measured. [3]

Contents

The Evans balance measures the force on the magnet instead of the sample in the magnetic field. [4]

Mechanism

The Evan’s balance measures the change in current required to keep a set of suspended permanent magnets in balance after their magnetic fields interact with the sample. The magnets are located on one end of the balance beam and change the position of the beam by interacting with the sample. This change is registered by a pair of photodiodes set on the opposite side of the balance beam’s equilibrium position. These diodes send signals to an amplifier that supplies current to a coil that will exactly cancel the interaction force. A digital voltmeter, connected across a precision resistor, in series with the coil, measures the current directly and is displayed on the digital readout. [1]

Dennis F. Evans described the original Evans balance in 1973, based on a torsional balance developed by Alexander Rankine in 1937. Evans used Ticonal bars with cadmium-plated mild steel yokes as the magnets and a Johnson Matthey gold alloy (hence the other name of the balance) for the suspension strip, glued together with epoxy resin onto a phosphor brown spacer. The tubes were made from NMR tubes and the current came from CdS photocells. [5] This original was modified with help from the Johnson Matthey company. Two pairs of magnets were glued between the arms of an H-frame. The sample was placed into the gap between one pair of magnets and a small coil in the gap between the second pair of magnets. This entire construction pivoted horizontally around a torsion strip. When a sample tube was placed between the first pair of magnets, the torsional force was restored by the current passed through the coil between the second pair of magnets, giving a reading on a display instead of a Helipot potentiometer. [6]

Comparison to alternative magnetic balances

An Evans balance does not require a precision weighing device, a key advantage over alternative magnetic balances. Moreover, an Evans balance consumes less time than a Gouy balance or Faraday balance but offers less accuracy and less sensitivity. [5] An Evans balance has a range from 0.001 x 10−7 to 1.99 x 10−7 CGS volume susceptibility units. [7] The original Evans balance had an accuracy of within 1% of the literature values for diamagnetic solutions and within 2% of the literature values for paramagnetic solids. [5]

The system allows for measurements of solid, liquid, and gaseous forms of a wide range of paramagnetic and diamagnetic materials. For each measurement, around 250 mg of sample is required. [8]

Calibration

The Evans balance measures susceptibility indirectly by referring to a calibration standard of known susceptibility. The most convenient compound for this purpose is mercury cobalt thiocyanate, HgCo(NCS)4, which has a susceptibility of 16.44×10−6 (±0.5%) CGS at 20°C. [9] Another common calibration standard is [Ni(en)3]S2O3 which has a susceptibility of 1.104 x 10−5 erg G−2 cm−3. [10] Three readings of the meter are needed: of an empty tube, R0; of the tube filled with calibrant; and of the tube filled with the sample, Rs. Some balances have an auto-tare feature that eliminates the need for the R0 measurement. [11] Accuracy depends somewhat on the homogeneous packing of the sample. The first two provide a calibration constant, C. The mass susceptibility in grams is calculated as

where L is the length of the sample, C is the calibration constant (usually 1 if it has been calibrated), and m is its mass in grams. The reading for the empty tube is needed because the tube glass is diamagnetic. There is a V term multiplied by an A term in the most general form of the equation. These two terms (VA) are collectively added to the numerator in the above equation. The V term is the volume susceptibility of air (0.029 x 10−6 erg G−2 cm−3) and A is the cross-sectional area of the sample. These two terms can be ignored for solid samples, yielding the original equation written above. [10]

To calculate the volume magnetic susceptibility (χ) instead of the weight susceptibility (χg), such as in a liquid sample, the equation would have the extra V term added to the numerator and instead of being divided by m, the equation would be divided by d for the density of the solution. [5]

Related Research Articles

<span class="mw-page-title-main">Diamagnetism</span> Magnetic property of ordinary materials

Diamagnetism is the property of materials that are repelled by a magnetic field; an applied magnetic field creates an induced magnetic field in them in the opposite direction, causing a repulsive force. In contrast, paramagnetic and ferromagnetic materials are attracted by a magnetic field. Diamagnetism is a quantum mechanical effect that occurs in all materials; when it is the only contribution to the magnetism, the material is called diamagnetic. In paramagnetic and ferromagnetic substances, the weak diamagnetic force is overcome by the attractive force of magnetic dipoles in the material. The magnetic permeability of diamagnetic materials is less than the permeability of vacuum, μ0. In most materials, diamagnetism is a weak effect which can be detected only by sensitive laboratory instruments, but a superconductor acts as a strong diamagnet because it entirely expels any magnetic field from its interior.

<span class="mw-page-title-main">Magnetism</span> Class of physical phenomena

Magnetism is the class of physical attributes that occur through a magnetic field, which allows objects to attract or repel each other. Because both electric currents and magnetic moments of elementary particles give rise to a magnetic field, magnetism is one of two aspects of electromagnetism.

<span class="mw-page-title-main">Paramagnetism</span> Weak, attractive magnetism possessed by most elements and some compounds

Paramagnetism is a form of magnetism whereby some materials are weakly attracted by an externally applied magnetic field, and form internal, induced magnetic fields in the direction of the applied magnetic field. In contrast with this behavior, diamagnetic materials are repelled by magnetic fields and form induced magnetic fields in the direction opposite to that of the applied magnetic field. Paramagnetic materials include most chemical elements and some compounds; they have a relative magnetic permeability slightly greater than 1 and hence are attracted to magnetic fields. The magnetic moment induced by the applied field is linear in the field strength and rather weak. It typically requires a sensitive analytical balance to detect the effect and modern measurements on paramagnetic materials are often conducted with a SQUID magnetometer.

<span class="mw-page-title-main">Superparamagnetism</span>

Superparamagnetism is a form of magnetism which appears in small ferromagnetic or ferrimagnetic nanoparticles. In sufficiently small nanoparticles, magnetization can randomly flip direction under the influence of temperature. The typical time between two flips is called the Néel relaxation time. In the absence of an external magnetic field, when the time used to measure the magnetization of the nanoparticles is much longer than the Néel relaxation time, their magnetization appears to be in average zero; they are said to be in the superparamagnetic state. In this state, an external magnetic field is able to magnetize the nanoparticles, similarly to a paramagnet. However, their magnetic susceptibility is much larger than that of paramagnets.

A viscometer is an instrument used to measure the viscosity of a fluid. For liquids with viscosities which vary with flow conditions, an instrument called a rheometer is used. Thus, a rheometer can be considered as a special type of viscometer. Viscometers can measure only constant viscosity, that is, viscosity that does not change with flow conditions.

<span class="mw-page-title-main">Magnet</span> Object that has a magnetic field

A magnet is a material or object that produces a magnetic field. This magnetic field is invisible but is responsible for the most notable property of a magnet: a force that pulls on other ferromagnetic materials, such as iron, steel, nickel, cobalt, etc. and attracts or repels other magnets.

<span class="mw-page-title-main">Magnetometer</span> Device that measures magnetism

A magnetometer is a device that measures magnetic field or magnetic dipole moment. Different types of magnetometers measure the direction, strength, or relative change of a magnetic field at a particular location. A compass is one such device, one that measures the direction of an ambient magnetic field, in this case, the Earth's magnetic field. Other magnetometers measure the magnetic dipole moment of a magnetic material such as a ferromagnet, for example by recording the effect of this magnetic dipole on the induced current in a coil.

In electromagnetism, the magnetic susceptibility is a measure of how much a material will become magnetized in an applied magnetic field. It is the ratio of magnetization M to the applied magnetizing field intensity H. This allows a simple classification, into two categories, of most materials' responses to an applied magnetic field: an alignment with the magnetic field, χ > 0, called paramagnetism, or an alignment against the field, χ < 0, called diamagnetism.

<span class="mw-page-title-main">Ferrofluid</span> Special type of liquid which is attracted by poles of a magnet

Ferrofluid is a liquid that is attracted to the poles of a magnet. It is a colloidal liquid made of nanoscale ferromagnetic or ferrimagnetic particles suspended in a carrier fluid. Each magnetic particle is thoroughly coated with a surfactant to inhibit clumping. Large ferromagnetic particles can be ripped out of the homogeneous colloidal mixture, forming a separate clump of magnetic dust when exposed to strong magnetic fields. The magnetic attraction of tiny nanoparticles is weak enough that the surfactant's Van der Waals force is sufficient to prevent magnetic clumping or agglomeration. Ferrofluids usually do not retain magnetization in the absence of an externally applied field and thus are often classified as "superparamagnets" rather than ferromagnets.

<span class="mw-page-title-main">Kibble balance</span> Electromechanical weight measuring instrument

A Kibble balance is an electromechanical measuring instrument that measures the weight of a test object very precisely by the electric current and voltage needed to produce a compensating force. It is a metrological instrument that can realize the definition of the kilogram unit of mass based on fundamental constants.

In nuclear magnetic resonance (NMR) spectroscopy, the chemical shift is the resonant frequency of an atomic nucleus relative to a standard in a magnetic field. Often the position and number of chemical shifts are diagnostic of the structure of a molecule. Chemical shifts are also used to describe signals in other forms of spectroscopy such as photoemission spectroscopy.

<span class="mw-page-title-main">Electron paramagnetic resonance</span> Technique to study materials that have unpaired electrons

Electron paramagnetic resonance (EPR) or electron spin resonance (ESR) spectroscopy is a method for studying materials that have unpaired electrons. The basic concepts of EPR are analogous to those of nuclear magnetic resonance (NMR), but the spins excited are those of the electrons instead of the atomic nuclei. EPR spectroscopy is particularly useful for studying metal complexes and organic radicals. EPR was first observed in Kazan State University by Soviet physicist Yevgeny Zavoisky in 1944, and was developed independently at the same time by Brebis Bleaney at the University of Oxford.

<span class="mw-page-title-main">Gouy balance</span>

The Gouy balance, invented by the French physicist Louis Georges Gouy, is a device for measuring the magnetic susceptibility of a sample. The Gouy balance operates on magnetic torque, by placing the sample on a horizontal arm or beam suspended by a thin fiber, and placing either a permanent magnet or electromagnet on the other end of the arm, there is a magnetic field applied to the system, causing the coil to experience a torque causing the arm to twist or rotate. The angle of rotation can then be calculated.

In magnetism, Pascals’ constants are numbers used in the evaluation of the magnetic susceptibilities of coordination compounds. The magnetic susceptibility of a compound is the sum of the paramagnetic susceptibility associated with the unpaired electrons and the opposing diamagnetic susceptibility associated with electron pairs. Typically, the paramagnetic susceptibility greatly exceeds in magnitude the diamagnetic susceptibility. Thus, the diamagnetic correction is not considered for many purposes. For more precise analyses, however, the diamagnetic corrections are calculated by summing the contributions from the components of the molecule. These group contributions are Pascal’s constants. This analysis assumes that these group contributions are identical in all molecules. In general, the magnitude of Pascal’s constants correlates with the number of electrons in the groups. Groups with extended pi-delocalization have larger diamagnetic corrections compared to related saturated ligands.

Magnetochemistry is concerned with the magnetic properties of chemical compounds. Magnetic properties arise from the spin and orbital angular momentum of the electrons contained in a compound. Compounds are diamagnetic when they contain no unpaired electrons. Molecular compounds that contain one or more unpaired electrons are paramagnetic. The magnitude of the paramagnetism is expressed as an effective magnetic moment, μeff. For first-row transition metals the magnitude of μeff is, to a first approximation, a simple function of the number of unpaired electrons, the spin-only formula. In general, spin–orbit coupling causes μeff to deviate from the spin-only formula. For the heavier transition metals, lanthanides and actinides, spin–orbit coupling cannot be ignored. Exchange interaction can occur in clusters and infinite lattices, resulting in ferromagnetism, antiferromagnetism or ferrimagnetism depending on the relative orientations of the individual spins.

<span class="mw-page-title-main">Faraday balance</span> Device for measuring magnetism of an object

A Faraday balance is a device used to measure magnetic susceptibility, a property of matter is related to the force experienced by a substance in a magnetic field. Various practical devices are available for the measurement of susceptibility, with differences in the shape of the field and the way the force is measured.

<span class="mw-page-title-main">Magnetic levitation</span> Suspension of objects by magnetic force.

Magnetic levitation (maglev) or magnetic suspension is a method by which an object is suspended with no support other than magnetic fields. Magnetic force is used to counteract the effects of the gravitational force and any other forces.

<span class="mw-page-title-main">Paramagnetic nuclear magnetic resonance spectroscopy</span> Spectroscopy of paramagnetic compounds via NMR

Paramagnetic nuclear magnetic resonance spectroscopy refers to nuclear magnetic resonance (NMR) spectroscopy of paramagnetic compounds. Although most NMR measurements are conducted on diamagnetic compounds, paramagnetic samples are also amenable to analysis and give rise to special effects indicated by a wide chemical shift range and broadened signals. Paramagnetism diminishes the resolution of an NMR spectrum to the extent that coupling is rarely resolved. Nonetheless spectra of paramagnetic compounds provide insight into the bonding and structure of the sample. For example, the broadening of signals is compensated in part by the wide chemical shift range (often 200 ppm in 1H NMR). Since paramagnetism leads to shorter relaxation times (T1), the rate of spectral acquisition can be high.

Dennis Frederick Evans was an English chemist who made important contributions to nuclear magnetic resonance, magnetochemistry and other aspects of chemistry.

References

  1. 1 2 "Magnetic Susceptibility of Coordination Compounds" (PDF). www2.chemistry.msu.edu. April 26, 2024. Retrieved April 26, 2024.{{cite web}}: CS1 maint: url-status (link)
  2. "Magnetic Susceptibility Balances (MSB) : Johnson Matthey | PDF | Magnet | Physics". Scribd. Retrieved 2024-04-26.
  3. O'Connor, C.J. (1982). Lippard, S.J. (ed.). Magnetic susceptibility measurements. Progress in Inorganic Chemistry. Vol. 29. Wiley. p. 203. ISBN   978-0-470-16680-2.
  4. "Illustration of commercial Evans balance". Archived from the original on 2011-07-16. Retrieved 2011-02-19.
  5. 1 2 3 4 Evans, D.F. (1974). "A new type of magnetic balance". Journal of Physics E: Scientific Instruments. 7 (4): 247. Bibcode:1974JPhE....7..247E. doi:10.1088/0022-3735/7/4/007.
  6. "Classic Kit: The Evans balance" . Retrieved 5 September 2023.
  7. "Archived copy" (PDF). Archived from the original (PDF) on 2014-10-29. Retrieved 2014-10-29.{{cite web}}: CS1 maint: archived copy as title (link)
  8. "Archived copy" (PDF). Archived from the original (PDF) on 2014-10-29. Retrieved 2014-10-29.{{cite web}}: CS1 maint: archived copy as title (link)
  9. Figgis, B.N.; Lewis, J. (1960). "The Magnetochemistry of Complex Compounds". In Lewis. J. and Wilkins. R.G. (ed.). Modern Coordination Chemistry. New York: Wiley. p. 415
  10. 1 2 http://alpha.chem.umb.edu/chemistry/ch371/documents/MicroscaleDeterminationofMagneticSusceptibility_001.pdf [ bare URL PDF ]
  11. "Archived copy" (PDF). Archived from the original (PDF) on 2014-10-29. Retrieved 2014-10-29.{{cite web}}: CS1 maint: archived copy as title (link)