Exclusion zone (physics)

Last updated

The exclusion zone is a large stratum (typically on the order of a few microns to a millimeter) observed in pure liquid water, from which particles of other materials in suspension are repelled. It is observed next to the surface of solid materials, e.g. the walls of the container in which the liquid water is held, or solid specimens immersed in it, and also at the water/air interface. Several independent research groups have reported observations of the exclusion zone next to hydrophilic surfaces. [1] [2] [3] [4] Some research groups have reported the observation of the exclusion zone next to metal surfaces. [5] [6] The Exclusion zone has been observed using different techniques, e.g. birefringence, neutron radiography, nuclear magnetic resonance, and others, [4] and it has potentially high importance in biology, and in engineering applications such as filtration and microfluidics.

Contents

Historical background

The first observations of a different behavior of water molecules, close to the walls of its container, date back to late 1960s and early 1970s, when Drost-Hansen, upon reviewing many experimental articles, came to the conclusion that interfacial water shows structural difference. [7] [8]

In 1986 Deryagin and his colleagues observed an exclusion zone next to the walls of cells. [9]

In 2006 the group of Gerald Pollack reported their observation of what they called an exclusion zone. They observed that the particles of colloidal and molecular solutes suspended in aqueous solution are profoundly and extensively excluded from the vicinity of various hydrophilic surfaces. [1] The exclusion zone has been observed and characterized by several independent groups since those early observations. [10] [11] [4]

Theoretical models

Since the early observations, several theoretical models have been proposed, to explain the experimental observation of the exclusion zone.

Mechanical model: Change in geometrical structure

Some researchers suggest that the exclusion zone is due to a change in the geometrical structure of water, induced by the surface of the hydrophilic (or metal) solid water's structure. [1] [12] In this model, the water in the exclusion zone has a structure of hexagonal sheets, where the hydrogen atoms are positioned between oxygen atoms. Moreover, hydrogen atoms bond to the oxygens atoms lying in the layer above and below so that in total each hydrogen forms three bonds. This structure can be considered as an intermediate between ice and water. However, the hexagonal sheet hypothesis does not account for all aspects of the exclusion zone, and it is not supported by the majority of physicists.

Quantum Electrodynamical model: quantum confinement

Another calculation performed describes the molecules of the exclusion zone using Quantum Mechanics and Quantum Electrodynamics. In this model the liquid bulk water is in a gaseous state. Then, above a certain density threshold and below a specific critical temperature, those molecules go to another quantum state, with lower energy. In this lower energy, coherent state, the cloud of electrons oscillate between two quantum states: a ground state, and an excited state where one electron per molecule is almost free (the binding energy is about 0.5 eV). In this coherent state the quantum superposition has a component with coefficient 0.9 of the ground state, and a component with 0.1 of the excited state. The electrons in this quantum state oscillate between the ground state and the excited state with a certain frequency, and this oscillation creates an electromagnetic field, which is confined within the super-molecular structure, so that no radiation is observed. The molecules of the structure, together with the confined electromagnetic field, constitute in this model the exclusion zone. [13]

Related Research Articles

<span class="mw-page-title-main">Hydrophobe</span> Molecule or surface that has no attraction to water

In chemistry, hydrophobicity is the physical property of a molecule that is seemingly repelled from a mass of water. In contrast, hydrophiles are attracted to water.

<span class="mw-page-title-main">Liquid crystal</span> State of matter with properties of both conventional liquids and crystals

Liquid crystal (LC) is a state of matter whose properties are between those of conventional liquids and those of solid crystals. For example, a liquid crystal may flow like a liquid, but its molecules may be oriented in a crystal-like way. There are many types of LC phases, which can be distinguished by their optical properties. The contrasting textures arise due to molecules within one area of material ("domain") being oriented in the same direction but different areas having different orientations. An LC material may not always be in an LC state of matter.

<span class="mw-page-title-main">Nanotechnology</span> Field of applied science involving control of matter on atomic and (supra)molecular scales

Nanotechnology, often shortened to nanotech, is the use of matter on atomic, molecular, and supramolecular scales for industrial purposes. The earliest, widespread description of nanotechnology referred to the particular technological goal of precisely manipulating atoms and molecules for fabrication of macroscale products, also now referred to as molecular nanotechnology. A more generalized description of nanotechnology was subsequently established by the National Nanotechnology Initiative, which defined nanotechnology as the manipulation of matter with at least one dimension sized from 1 to 100 nanometers (nm). This definition reflects the fact that quantum mechanical effects are important at this quantum-realm scale, and so the definition shifted from a particular technological goal to a research category inclusive of all types of research and technologies that deal with the special properties of matter which occur below the given size threshold. It is therefore common to see the plural form "nanotechnologies" as well as "nanoscale technologies" to refer to the broad range of research and applications whose common trait is size.

<span class="mw-page-title-main">State of matter</span> Distinct forms that matter take on

In physics, a state of matter is one of the distinct forms in which matter can exist. Four states of matter are observable in everyday life: solid, liquid, gas, and plasma. Many intermediate states are known to exist, such as liquid crystal, and some states only exist under extreme conditions, such as Bose–Einstein condensates and Fermionic condensates, neutron-degenerate matter, and quark–gluon plasma. For a complete list of all exotic states of matter, see the list of states of matter.

van der Waals force Interactions between groups of atoms that do not arise from chemical bonds

In molecular physics and chemistry, the van der Waals force is a distance-dependent interaction between atoms or molecules. Unlike ionic or covalent bonds, these attractions do not result from a chemical electronic bond; they are comparatively weak and therefore more susceptible to disturbance. The van der Waals force quickly vanishes at longer distances between interacting molecules.

<span class="mw-page-title-main">Surfactant</span> Substance that lowers the surface tension between a liquid and another material

Surfactants are chemical compounds that decrease the surface tension or interfacial tension between two liquids, a liquid and a gas, or a liquid and a solid. Surfactants may function as emulsifiers, wetting agents, detergents, foaming agents, or dispersants. The word "surfactant" is a blend of surface-active agent, coined c. 1950.

<span class="mw-page-title-main">Molecular dynamics</span> Computer simulations to discover and understand chemical properties

Molecular dynamics (MD) is a computer simulation method for analyzing the physical movements of atoms and molecules. The atoms and molecules are allowed to interact for a fixed period of time, giving a view of the dynamic "evolution" of the system. In the most common version, the trajectories of atoms and molecules are determined by numerically solving Newton's equations of motion for a system of interacting particles, where forces between the particles and their potential energies are often calculated using interatomic potentials or molecular mechanical force fields. The method is applied mostly in chemical physics, materials science, and biophysics.

<span class="mw-page-title-main">Self-assembly</span> Process in which disordered components form an organized structure or pattern

Self-assembly is a process in which a disordered system of pre-existing components forms an organized structure or pattern as a consequence of specific, local interactions among the components themselves, without external direction. When the constitutive components are molecules, the process is termed molecular self-assembly.

<span class="mw-page-title-main">Hydrophobic effect</span> Aggregation of non-polar molecules in aqueous solutions

The hydrophobic effect is the observed tendency of nonpolar substances to aggregate in an aqueous solution and exclude water molecules. The word hydrophobic literally means "water-fearing", and it describes the segregation of water and nonpolar substances, which maximizes hydrogen bonding between molecules of water and minimizes the area of contact between water and nonpolar molecules. In terms of thermodynamics, the hydrophobic effect is the free energy change of water surrounding a solute. A positive free energy change of the surrounding solvent indicates hydrophobicity, whereas a negative free energy change implies hydrophilicity.

A thin film is a layer of material ranging from fractions of a nanometer (monolayer) to several micrometers in thickness. The controlled synthesis of materials as thin films is a fundamental step in many applications. A familiar example is the household mirror, which typically has a thin metal coating on the back of a sheet of glass to form a reflective interface. The process of silvering was once commonly used to produce mirrors, while more recently the metal layer is deposited using techniques such as sputtering. Advances in thin film deposition techniques during the 20th century have enabled a wide range of technological breakthroughs in areas such as magnetic recording media, electronic semiconductor devices, integrated passive devices, LEDs, optical coatings, hard coatings on cutting tools, and for both energy generation and storage. It is also being applied to pharmaceuticals, via thin-film drug delivery. A stack of thin films is called a multilayer.

<span class="mw-page-title-main">Langmuir–Blodgett film</span> Thin film obtained by depositing multiple monolayers onto a surface

A Langmuir–Blodgett (LB) film is a nanostructured system formed when Langmuir films—or Langmuir monolayers (LM)—are transferred from the liquid-gas interface to solid supports during the vertical passage of the support through the monolayers. LB films can contain one or more monolayers of an organic material, deposited from the surface of a liquid onto a solid by immersing the solid substrate into the liquid. A monolayer is adsorbed homogeneously with each immersion or emersion step, thus films with very accurate thickness can be formed. This thickness is accurate because the thickness of each monolayer is known and can therefore be added to find the total thickness of a Langmuir–Blodgett film.

In chemistry, a non-covalent interaction differs from a covalent bond in that it does not involve the sharing of electrons, but rather involves more dispersed variations of electromagnetic interactions between molecules or within a molecule. The chemical energy released in the formation of non-covalent interactions is typically on the order of 1–5 kcal/mol. Non-covalent interactions can be classified into different categories, such as electrostatic, π-effects, van der Waals forces, and hydrophobic effects.

<span class="mw-page-title-main">Force field (chemistry)</span> Concept on molecular modeling

In the context of chemistry and molecular modelling, a force field is a computational method that is used to estimate the forces between atoms within molecules and also between molecules. More precisely, the force field refers to the functional form and parameter sets used to calculate the potential energy of a system of atoms or coarse-grained particles in molecular mechanics, molecular dynamics, or Monte Carlo simulations. The parameters for a chosen energy function may be derived from experiments in physics and chemistry, calculations in quantum mechanics, or both. Force fields are interatomic potentials and utilize the same concept as force fields in classical physics, with the difference that the force field parameters in chemistry describe the energy landscape, from which the acting forces on every particle are derived as a gradient of the potential energy with respect to the particle coordinates.

<span class="mw-page-title-main">Plasma cleaning</span>

Plasma cleaning is the removal of impurities and contaminants from surfaces through the use of an energetic plasma or dielectric barrier discharge (DBD) plasma created from gaseous species. Gases such as argon and oxygen, as well as mixtures such as air and hydrogen/nitrogen are used. The plasma is created by using high frequency voltages to ionise the low pressure gas, although atmospheric pressure plasmas are now also common.

<span class="mw-page-title-main">Properties of water</span> Physical and chemical properties of pure water

Water is a polar inorganic compound that is at room temperature a tasteless and odorless liquid, which is nearly colorless apart from an inherent hint of blue. It is by far the most studied chemical compound and is described as the "universal solvent" and the "solvent of life". It is the most abundant substance on the surface of Earth and the only common substance to exist as a solid, liquid, and gas on Earth's surface. It is also the third most abundant molecule in the universe.

<span class="mw-page-title-main">Hydrogen polyoxide</span> Chemical compound

Hydrogen polyoxides are chemical compounds that consist only of hydrogen and oxygen atoms, are bonded exclusively by single bonds, and are acyclic. They can, therefore, be classed as hydrogen chalcogenides.

The behavior of quantum dots (QDs) in solution and their interaction with other surfaces is of great importance to biological and industrial applications, such as optical displays, animal tagging, anti-counterfeiting dyes and paints, chemical sensing, and fluorescent tagging. However, unmodified quantum dots tend to be hydrophobic, which precludes their use in stable, water-based colloids. Furthermore, because the ratio of surface area to volume in a quantum dot is much higher than for larger particles, the thermodynamic free energy associated with dangling bonds on the surface is sufficient to impede the quantum confinement of excitons. Once solubilized by encapsulation in either a hydrophobic interior micelle or a hydrophilic exterior micelle, the QDs can be successfully introduced into an aqueous medium, in which they form an extended hydrogel network. In this form, quantum dots can be utilized in several applications that benefit from their unique properties, such as medical imaging and thermal destruction of malignant cancers.

<span class="mw-page-title-main">Self-assembly of nanoparticles</span>

Nanoparticles are classified as having at least one of its dimensions in the range of 1-100 nanometers (nm). The small size of nanoparticles allows them to have unique characteristics which may not be possible on the macro-scale. Self-assembly is the spontaneous organization of smaller subunits to form larger, well-organized patterns. For nanoparticles, this spontaneous assembly is a consequence of interactions between the particles aimed at achieving a thermodynamic equilibrium and reducing the system’s free energy. The thermodynamics definition of self-assembly was introduced by Professor Nicholas A. Kotov. He describes self-assembly as a process where components of the system acquire non-random spatial distribution with respect to each other and the boundaries of the system. This definition allows one to account for mass and energy fluxes taking place in the self-assembly processes.

<span class="mw-page-title-main">Nanocluster</span> Collection of bound atoms or molecules ≤3 nm in diameter

Nanoclusters are atomically precise, crystalline materials most often existing on the 0-2 nanometer scale. They are often considered kinetically stable intermediates that form during the synthesis of comparatively larger materials such as semiconductor and metallic nanocrystals. The majority of research conducted to study nanoclusters has focused on characterizing their crystal structures and understanding their role in the nucleation and growth mechanisms of larger materials. These nanoclusters can be composed either of a single or of multiple elements, and exhibit interesting electronic, optical, and chemical properties compared to their larger counterparts.

The oxhydroelectric effect consists in the generation of voltage and electric current in pure liquid water, without any electrolyte, upon exposure to electromagnetic radiation in the infrared range, after creating a physical asymmetry in liquid water e.g. thanks to a strongly hydrophile polymer, such as Nafion. The system can be described as a photovoltaic cell operating in the infrared electromagnetic range, based on liquid water instead of a semiconductor.

References

  1. 1 2 3 Zheng, Jian-ming; Chin, Wei-Chun; Khijniak, Eugene; Pollack, Gerald H. (2006). "Surfaces and interfacial water: Evidence that hydrophilic surfaces have long-range impact". Advances in Colloid and Interface Science. 127 (1): 19–27. doi:10.1016/j.cis.2006.07.002. PMID   16952332.
  2. ↑ Chen, Chi-Shuo; Chung, Wei-Ju; Hsu, Ian C.; Wu, Chien-Ming; Chin, Wei-Chun (2011). "Force field measurements within the exclusion zone of water". Journal of Biological Physics. 38 (1): 113–120. doi:10.1007/s10867-011-9237-5. PMC   3285724 . PMID   23277674.
  3. ↑ Bischof, Marco; Del Giudice, Emilio (2013). "Communication and the Emergence and of Collective and Behavior in and Living Organisms: A Quantum and Approach". Molecular Biology International. 2013: 987549. doi: 10.1155/2013/987549 . PMC   3833029 . PMID   24288611.
  4. 1 2 3 Elton, Daniel C.; Spencer, Peter D.; Riches, James D.; Williams, Elizabeth D. (2020-07-17). "Exclusion Zone Phenomena in Water - A Critical Review of Experimental Findings and Theories". International Journal of Molecular Sciences. 21 (14): 5041. doi: 10.3390/ijms21145041 . PMC   7404113 . PMID   32708867.
  5. ↑ Pedroza, Luana S.; Poissier, Adrien; Fernández-Serra, M.-V. (2015). "Local order of liquid water at metallic electrode surfaces". The Journal of Chemical Physics. 142 (3): 034706. Bibcode:2015JChPh.142c4706P. doi:10.1063/1.4905493. PMID   25612724. Archived from the original on 2022-03-19. Retrieved 2022-03-19.
  6. ↑ Chai, B; Mahtani, AG; Pollack, GH (2012). "Unexpected presence of solute-free zones at metal-water interfaces". Contemporary Materials. 3 (1): 1–12. doi:10.7251/COM1201001C. PMC   3692373 . PMID   23807904.
  7. ↑ Drost-Hansen, Walter (1969). "Structure of water near solid interfaces". Industrial & Engineering Chemistry. 61 (11): 10–47. doi:10.1021/ie50719a005.
  8. ↑ Drost-Hansen, Walter (1973). "Phase transitions in biological systems: manifestations of cooperative processes in vicinal water". Annals of the Lyceum of Natural History of New York. 204 (1): 100–112. Bibcode:1973NYASA.204..100D. doi:10.1111/j.1749-6632.1973.tb30773.x. PMID   4513148. S2CID   35243683.
  9. ↑ Deryagin, BV; Golovanov, MV (1986). "Electromagnetic nature of forces of repulsion forming aureoles around cells". Colloid Journal of the USSR. 48 (2): 209–211.
  10. ↑ Chen, Chi-Shuo; Chung, Wei-Ju; Hsu, Ian C; Wu, Chien-Ming; Chin, Wei-Chun (2012). "Force field measurements within the exclusion zone of water". Journal of Biological Physics. 38 (1): 113–120. doi:10.1007/s10867-011-9237-5. PMC   3285724 . PMID   23277674.
  11. ↑ Huszár, István N; Mártonfalvi, Zsolt; Laki, András József; Iván, Kristóf; Kellermayer, Miklós (2014). "Exclusion-zone dynamics explored with microfluidics and optical tweezers". Entropy. 16 (8): 4322–4337. Bibcode:2014Entrp..16.4322H. doi: 10.3390/e16084322 .
  12. ↑ Oehr, Klaus; LeMay, Paul (2014). "The Case for Tetrahedral Oxy-subhydride (TOSH) Structures in the Exclusion Zones of Anchored Polar Solvents Including Water". Entropy. 16 (11): 5712–5720. Bibcode:2014Entrp..16.5712O. doi: 10.3390/e16115712 .
  13. ↑ V. Elia, R. Germano; C. Hison, E. Del Giudice (2013). "Oxhydroelectric Effect in bi-distilled water". Key Engineering Materials. 543: 455–459. doi:10.4028/www.scientific.net/KEM.543.455. S2CID   94391774. Archived from the original on 2022-03-19. Retrieved 2022-03-19.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.