Filtered Containment Venting System

Last updated

A Filtered Containment Venting System (FCVS) is an accident management system designed to minimize the release of fission products when releasing the pressure of the containment building in the case of a severe nuclear accident. As a Severe Accident Management Measure (SAMM), containment venting cannot prevent a meltdown but can help alleviate its consequences on the environment.

Contents

Principle

Most nuclear power plants feature a containment building whose role is to be the ultimate barrier, as per the defense-in-depth principle, against the release of radionuclides in the environment during accidents involving partial or total reactor core damage, that is, in which the integrity of the nuclear fuel (first barrier) is lost. In the most severe of such scenarios, if the fuel remains insufficiently cooled for prolonged periods of time, the integrity of the primary system (second barrier) can be threatened as well, for example if a substantial mass of molten fuel (corium) reaches the bottom of the reactor pressure vessel and melts through it. At this point most of the cooling water of the primary circuit will have been released into the containment atmosphere if it had not already been released through a pipe rupture (LOCA), along with volatile fission products such as Cesium and Iodine from the molten fuel, thereby increasing containment pressure. Although nuclear power plants are equipped with systems designed to cool the containment atmosphere (such as containment spray systems), these may be unavailable in the case of a severe accident (for example a Station Blackout in which all power is lost). In this case, uncontrolled releases of radionuclides due to containment failure can be avoided by venting its atmosphere to decrease pressure.

There are two main types of FCVS:

  1. Dry, using a gravel or sand-bed filter
  2. Wet, using a scrubber in a liquid solution

Both allow the removal of most of the aerosols (including cesium, >99.9%) and iodine ( >99% in elemental form) contained in the vented atmosphere.

Historical usage

Historically in terms of accident usage, a primitive scrubber on a first generation gas cooled reactor, reduced the emission of radioisotopes from the Windscale fire in 1957. The scrubber, which prior to its scrubbing services being called upon, was derisively known as Cockcroft's Folly after the scientist John Cockcroft, who had insisted on its incorporation with the facility. Following the fire and Cockcroft's scrubber reducing the quantity of material that escaped into the greater environment, "the word folly did not seem appropriate after the accident". [1]

The modern concept of FCVS was born from the conclusions of the WASH-1400 report and the consequences of the Three Mile Island accident in the late 1970s, and its implementation in Western Europe was accelerated by the occurrence of the Chernobyl nuclear disaster in 1986. It was realized that some accident scenarios would lead to substantial releases of radionuclides in the environment that were deemed unacceptable especially in countries in which nuclear power plants are close to population centers, such as Western Europe.

During the late 1980s and early 1990s, FCVS were back-fitted to existing nuclear power plants in France, Germany, Sweden, Switzerland and Finland (except for the VVER at Loviisa). In Germany, the device is nicknamed Wallmann-Ventil after then environment minister Walter Wallmann who was in charge of nuclear safety at the time. By the 2010s, FCVS had been installed in Bulgaria, Canada, and the Netherlands. However, the Fukushima Daiichi Nuclear Power Plant involved in the 2011 Fukushima Daiichi nuclear disaster was not equipped with FCVS. Had the plant had a FCVS, the amount of radionuclides released during the accident would almost certainly have been lower. After this accident many other countries decided to upgrade their power plants with FCVS, including Belgium, China, Japan, South Korea, Spain and Romania. Furthermore, by 2014 such upgrades were being discussion in the Czech Republic, Slovakia, and Russia (for some plants). [2]

Suppliers

AREVA [3] and Westinghouse Electric Company [4] deliver FCVS.

Related Research Articles

<span class="mw-page-title-main">Boiling water reactor</span> Type of nuclear reactor that directly boils water

A boiling water reactor (BWR) is a type of light water nuclear reactor used for the generation of electrical power. It is a design different from a Soviet graphite-moderated RBMK. It is the second most common type of electricity-generating nuclear reactor after the pressurized water reactor (PWR), which is also a type of light water nuclear reactor. The main difference between a BWR and PWR is that in a BWR, the reactor core heats water, which turns to steam and then drives a steam turbine. In a PWR, the reactor core heats water, which does not boil. This hot water then exchanges heat with a lower pressure system, which turns water into steam that drives the turbine. The BWR was developed by the Argonne National Laboratory and General Electric (GE) in the mid-1950s. The main present manufacturer is GE Hitachi Nuclear Energy, which specializes in the design and construction of this type of reactor.

<span class="mw-page-title-main">Nuclear meltdown</span> Severe nuclear reactor accident that results in core damage from overheating

A nuclear meltdown is a severe nuclear reactor accident that results in core damage from overheating. The term nuclear meltdown is not officially defined by the International Atomic Energy Agency or by the United States Nuclear Regulatory Commission. It has been defined to mean the accidental melting of the core of a nuclear reactor, however, and is in common usage a reference to the core's either complete or partial collapse.

<span class="mw-page-title-main">Windscale fire</span> 1957 nuclear accident in the UK

The Windscale fire of 10 October 1957 was the worst nuclear accident in the United Kingdom's history, and one of the worst in the world, ranked in severity at level 5 out of a possible 7 on the International Nuclear Event Scale. The fire was in Unit 1 of the two-pile Windscale site on the north-west coast of England in Cumberland. The two graphite-moderated reactors, referred to at the time as "piles," had been built as part of the British post-war atomic bomb project. Windscale Pile No. 1 was operational in October 1950, followed by Pile No. 2 in June 1951.

<span class="mw-page-title-main">Ringhals Nuclear Power Plant</span> Nuclear power plant in Sweden

Ringhals is a nuclear power plant in Sweden. It is situated on the Värö Peninsula in Varberg Municipality approximately 65 km south of Gothenburg. With a total power rating of 2,190 MWe, it is the second largest power plant in Sweden. It is owned 70% by Vattenfall and 30% by Uniper SE.

<span class="mw-page-title-main">Containment building</span> Structure surrounding a nuclear reactor to prevent radioactive releases

A containment building is a reinforced steel, concrete or lead structure enclosing a nuclear reactor. It is designed, in any emergency, to contain the escape of radioactive steam or gas to a maximum pressure in the range of 275 to 550 kPa. The containment is the fourth and final barrier to radioactive release, the first being the fuel ceramic itself, the second being the metal fuel cladding tubes, the third being the reactor vessel and coolant system.

<span class="mw-page-title-main">Economic Simplified Boiling Water Reactor</span> Nuclear reactor design

The Economic Simplified Boiling Water Reactor (ESBWR) is a passively safe generation III+ reactor design derived from its predecessor, the Simplified Boiling Water Reactor (SBWR) and from the Advanced Boiling Water Reactor (ABWR). All are designs by GE Hitachi Nuclear Energy (GEH), and are based on previous Boiling Water Reactor designs.

<span class="mw-page-title-main">Nuclear safety in the United States</span> US safety regulations for nuclear power and weapons

Nuclear safety in the United States is governed by federal regulations issued by the Nuclear Regulatory Commission (NRC). The NRC regulates all nuclear plants and materials in the United States except for nuclear plants and materials controlled by the U.S. government, as well those powering naval vessels.

<span class="mw-page-title-main">Fukushima Daiichi Nuclear Power Plant</span> Disabled nuclear power plant in Japan

The Fukushima Daiichi Nuclear Power Plant is a disabled nuclear power plant located on a 3.5-square-kilometre (860-acre) site in the towns of Ōkuma and Futaba in Fukushima Prefecture, Japan. The plant suffered major damage from the magnitude 9.0 earthquake and tsunami that hit Japan on March 11, 2011. The chain of events caused radiation leaks and permanently damaged several of its American-designed reactors, making them impossible to restart. By political decision, the remaining reactors were not restarted.

<span class="mw-page-title-main">Environmental impact of nuclear power</span> Overview of the impact of nuclear power on the environment

Nuclear power has various environmental impacts, including the construction and operation of the plant, the nuclear fuel cycle, and the effects of nuclear accidents. Nuclear power plants do not burn fossil fuels and so do not directly emit carbon dioxide. The carbon dioxide emitted during mining, enrichment, fabrication and transport of fuel is small when compared with the carbon dioxide emitted by fossil fuels of similar energy yield, however, these plants still produce other environmentally damaging wastes.

<span class="mw-page-title-main">Tihange Nuclear Power Station</span>

The Tihange Nuclear Power Station is one of two nuclear energy production sites in Belgium and contains 3 nuclear power plants. The site is located on the bank of the Meuse river, near the village of Tihange in the Walloon province of Liège. The station is operated and majority-owned by vertically-integrated Belgian energy corporation Electrabel. EDF Luminus has a 50% stake in the oldest unit and a 10% stake in the two newest units. It employs 1074 workers and covers an area of 75 hectares. The plant represents about 15% of Belgium's total electricity production capacity. Nuclear energy typically provides half of Belgium's domestically-generated electricity and is the country's lowest-cost source of power.

The three primary objectives of nuclear reactor safety systems as defined by the U.S. Nuclear Regulatory Commission are to shut down the reactor, maintain it in a shutdown condition and prevent the release of radioactive material.

A nuclear reactor coolant is a coolant in a nuclear reactor used to remove heat from the nuclear reactor core and transfer it to electrical generators and the environment. Frequently, a chain of two coolant loops are used because the primary coolant loop takes on short-term radioactivity from the reactor.

Boiling water reactor safety systems are nuclear safety systems constructed within boiling water reactors in order to prevent or mitigate environmental and health hazards in the event of accident or natural disaster.

<span class="mw-page-title-main">Fukushima nuclear disaster</span> 2011 nuclear disaster in Japan

The Fukushima nuclear disaster was a nuclear accident in 2011 at the Fukushima Daiichi Nuclear Power Plant in Ōkuma, Fukushima, Japan. The proximate cause of the disaster was the 2011 Tōhoku earthquake and tsunami, which occurred on the afternoon of 11 March 2011 and remains the most powerful earthquake ever recorded in Japan. The earthquake triggered a powerful tsunami, with 13–14-meter-high waves damaging the nuclear power plant's emergency diesel generators, leading to a loss of electric power. The result was the most severe nuclear accident since the Chernobyl disaster in 1986, classified as level seven on the International Nuclear Event Scale (INES) after initially being classified as level five, and thus joining Chernobyl as the only other accident to receive such classification. While the 1957 explosion at the Mayak facility was the second worst by radioactivity released, the INES ranks incidents by impact on population, so Chernobyl and Fukushima rank higher than the 10,000 evacuated from the Mayak site in the rural southern Urals.

<span class="mw-page-title-main">Timeline of the Fukushima Daiichi nuclear disaster</span> Chronology of events following the 2011 Fukushima nuclear disaster

Fukushima Daiichi is a multi-reactor nuclear power site in the Fukushima Prefecture of Japan. A nuclear disaster occurred there after a 9.0 magnitude earthquake and subsequent tsunami on 11 March 2011. The earthquake triggered a scram shut down of the three active reactors, and the ensuing tsunami crippled the site, stopped the backup diesel generators, and caused a station blackout. The subsequent lack of cooling led to explosions and meltdowns, with problems at three of the six reactors and in one of the six spent-fuel pools.

The Fukushima disaster cleanup is an ongoing attempt to limit radioactive contamination from the three nuclear reactors involved in the Fukushima Daiichi nuclear disaster that followed the earthquake and tsunami on 11 March 2011. The affected reactors were adjacent to one another and accident management was made much more difficult because of the number of simultaneous hazards concentrated in a small area. Failure of emergency power following the tsunami resulted in loss of coolant from each reactor, hydrogen explosions damaging the reactor buildings, and water draining from open-air spent fuel pools. Plant workers were put in the position of trying to cope simultaneously with core meltdowns at three reactors and exposed fuel pools at three units.

<span class="mw-page-title-main">Fukushima Daiichi nuclear disaster (Unit 2 Reactor)</span> One of the reactors involved in the Fukushima nuclear accident

The Fukushima Daiichi nuclear disaster was a series of equipment failures, nuclear meltdowns, and releases of radioactive materials at the Fukushima I Nuclear Power Plant, following the Tōhoku earthquake and tsunami on 11 March 2011. It is the largest nuclear disaster since the Chernobyl disaster of 1986.

<span class="mw-page-title-main">Fukushima Daiichi nuclear disaster (Unit 1 Reactor)</span> One of the reactors involved in the Fukushima nuclear accident

The Fukushima Daiichi nuclear disaster was a series of equipment failures, nuclear meltdowns, and releases of radioactive materials at the Fukushima I Nuclear Power Plant, following the Tōhoku earthquake and tsunami on 11 March 2011. It is the largest nuclear disaster since the Chernobyl disaster of 1986.

<span class="mw-page-title-main">Fukushima Daiichi nuclear disaster (Unit 3 Reactor)</span> One of the reactors involved in the Fukushima nuclear accident

Unit 3 of the Fukushima Daiichi Nuclear Power Plant was one of the reactors in operation on 11 March 2011, when the plant was struck by the tsunami produced by the Tohoku earthquake. In the aftermath, the reactor experienced hydrogen gas explosions and suffered a partial meltdown, along with the other two reactors in operation at the time the tsunami struck, unit 1 and unit 2. Efforts to remove debris and coolant water contaminated with radiation are ongoing and expected to last several decades.

<span class="mw-page-title-main">Integral Molten Salt Reactor</span>

The Integral Molten Salt Reactor (IMSR) is a nuclear power plant design targeted at developing a commercial product for the small modular reactor (SMR) market. It employs molten salt reactor technology which is being developed by the Canadian company Terrestrial Energy. It is based closely on the denatured molten salt reactor (DMSR), a reactor design from Oak Ridge National Laboratory. It also incorporates elements found in the SmAHTR, a later design from the same laboratory. The IMSR belongs to the DMSR class of molten salt reactors (MSR) and hence is a "burner" reactor that employs a liquid fuel rather than a conventional solid fuel; this liquid contains the nuclear fuel and also serves as primary coolant.

References

  1. Leatherdale, Duncan (2014-11-04). "'Folly' prevented nuclear disaster". BBC News. Retrieved 2018-08-09.
  2. OECD/NEA (2014). "Status Report on Filtered Containment Venting" (PDF). www.oecd-nea.org.
  3. "Orano | Accueil" (PDF). www.areva.com (in French). Retrieved 2018-08-09.
  4. www.westinghousenuclear.com(PDF) https://web.archive.org/web/20130326103439/http://www.westinghousenuclear.com/Products_%26_Services/docs/flysheets/NS-ES-0207.pdf. Archived from the original (PDF) on 2013-03-26.{{cite web}}: Missing or empty |title= (help)