Franchi SPAS-12 | |
---|---|
Type | Combat shotgun |
Place of origin | Italy |
Service history | |
In service | 1979–present |
Used by | See Users |
Wars | |
Production history | |
Designer | Franchi |
Designed | 1979 |
Manufacturer | Franchi |
Produced | 1979–2000 |
No. built | 37,000 |
Variants |
|
Specifications | |
Mass |
|
Length |
|
Barrel length |
|
Cartridge | 12 gauge 23⁄4 inch shells only |
Action | Pump-action/gas-operated |
Rate of fire | Semi-automatic (200-350 rounds/min) or pump-action |
Effective firing range | Dependent on ammunition used |
Feed system | Tube extension 5+1, 6+1, 7+1 and 8+1 rounds, internal tube magazine |
Sights | Iron sights |
The Franchi SPAS-12 is a combat shotgun manufactured by Italian firearms company Franchi from 1979 to 2000. The SPAS-12 is a dual-mode shotgun, adjustable for semi-automatic or pump-action operation. The SPAS-12 was sold to military and police users worldwide, as well as on the civilian market.
The appearance and intended purpose of the SPAS-12 initially led to its "military" designation as a combat shotgun. The SPAS-12 was designed from the ground up as a rugged military shotgun, and it was named the Special Purpose Automatic Shotgun. In 1990, Franchi renamed the shotgun the Sporting Purpose Automatic Shotgun, which allowed continued sales to the United States as a limited-magazine-capacity, fixed-stock model until 1994. Following the United States Federal Assault Weapons Ban, imports of SPAS-12 shotguns to the United States were stopped. In September 2004 the ban expired, but Franchi ended production of the SPAS-12 in 2000 to focus on the manufacturing of the SPAS-15 model.[ citation needed ] The SPAS-12's factory retail price in its final year was US$1,500 averaged for its final sales outside the United States to non-restricted countries. [1]
The SPAS-12 was designed to function primarily in semi-automatic mode, with the pump-action mode used to reliably fire low-pressure ammunition such as tear gas rounds or less-lethal bean bags. The firing mode is switched by depressing the button under the fore-grip and also sliding it forwards or backwards until it clicks into position allowing the rotating sleeve to open or close the two gas ports.
The semi-automatic mode functions with a short-stroke gas piston system. When a shell is fired, the pressure makes the bolt move rearward but the bolt will stop before opening as it deploys a single top locking lug. The gas vents into the barrel and the gas port is located towards the end of the barrel. From the gas port, the gas vents downwards into the gas block where it pushes the piston rearward. Because of the presence of the magazine tube and to avoid the use of a top-mounted gas system, the gas block and the piston are annular, along with the piston spring they enclose the magazine tube. Once operated, the piston drives 2 symmetrical thin sprung operating rods located in the corners formed by the barrel and the magazine tube. As the rods push the bolt carrier rearward, it disengages the locking lug and drives the bolt rearward, allowing the system to cycle.
The SPAS-12 has a magazine cut-off feature, which prevents the magazine from releasing a new round when the action is cycled. This allows the operator to load a different type of round into the chamber without first unloading the chambered round, and the second that would otherwise subsequently be released from the magazine.
A unique feature of the folding-stock variants is the butt hook. With the stock extended, the hook can be pushed in and turned 90 degrees to the left or right, to fit under the user's forearm. This is to enable the shotgun to be fired with one hand; e.g. while abseiling/rappelling, or from a vehicle window while driving. The hook can be released from the buttplate completely by turning 180 degrees.
SPAS-12 models feature two safeties: (i) a lever style or push button style safety, and (ii) a "quick employment safety". Lever safeties were recalled by Franchi and were replaced through the importer American Arms in the early 1990s. [a] There are two types of push-button safeties. The earliest version would release the hammer on a safe up to 1/4in. of travel when the trigger was depressed; this would cause a lockup of the action that would require the user to re-lock the bolt assembly to the rear to reset the hammer and then reload the chamber. The later version installed a detent and machined hole in the trigger group frame to prevent an action lock; the detent would prevent the hammer from engaging when the trigger was depressed and would prevent an action lock from occurring. The quick employment safety, which is on the left side of the trigger guard, disconnects the trigger when put into safe mode. The quick employment safety can be disengaged with the trigger finger when ready to fire and is intended for competition or tactical use. A third safety type, a pistol grip safety similar to the later-developed SPAS-15, is known to have been developed by Franchi for the SPAS-12, however, the pistol grip safety was not offered for sale to the general public.
A B-Square rail mount for optics was available for a short time in the 1990s as an aftermarket accessory.
The barrel of the SPAS-12 was externally threaded to accept a variety of attachments. The barrel is cylinder bored and spreads a normal shot charge to about 900mm at 40 meters.
There are four different magazine extension tubes manufactured for the SPAS-12:
Many choke types original and aftermarket exist for the SPAS-12. [2] A 44 mm grenade launcher was used by France for explosive grenades capable of a range of 150 meters. [3] A factory shot diverter that spreads shot vertically or horizontally was originally included with earlier model SPAS-12s. There are many known reproduction diverters. [4]
Four different stock styles exist. The first version of the SPAS-12 was manufactured with a wooden detachable stock and a standard grip. Later models included the folding metal stock with a hook. After the United States imposed import restrictions on the SPAS-12 in 1989, a version was released in 1990 with the synthetic hollow fixed stock and a six-shell capacity to comply with federal regulations for sporting purposes.
Four different factory barrels were manufactured for the SPAS-12.
The Franchi SPAS-12 came equipped with a non-adjustable circular aperture rear sight and a large, non-adjustable blade foresight integrated into the barrel. The LAW-12 was semi-automatic only and the SAS-12 was a pump-action only. These three "sister" shotguns accepted all SPAS-12 components, notably trigger groups, barrel threaded attachments and stocks. The various magazine extension tubes of the LAW-12 and SAS-12 were never designed to be interchangeable with the SPAS-12 as this would cause issues with the gas selector switch moving from auto to pump-action on the SPAS-12 model. [7] The extensions have been known to spin off the front of the SPAS-12 during cycling if the extension was not tapered for the SPAS-12 retaining pin.
The pump-action Franchi SAS-12 could accept 3" shells but it did not have a bolt handle cut in the bolt body. The SPAS and LAW could only accept 23⁄4" shells. The SAS-12 has a barrel length of 21+1⁄2 in (55 cm), an overall length of 41+1⁄2 in (105 cm), a weight of 7 lb 4 oz (3.3 kg) and a capacity of 8 rounds in the magazine + 1 in the chamber.
The semi-automatic-only Franchi LAW-12 Model was also restricted by importation in 1989 and banned in 1994 with the Federal Assault Weapons Ban. The LAW-12 has a barrel length of 21+1⁄2 in (55 cm), a weight of 7 lb 4 oz (3.3 kg) and a capacity of 8 rounds in the magazine + 1 in the chamber. The model was known to have been imported with all stock styles used on the Franchi SPAS-12. The LAW-12 models were more common with police sales as an alternative to the more expensive SPAS-12 for departments throughout the United States. The LAW-12 model was notably lighter – 1.35 lb (0.61 kg) – than the SPAS-12 and still maintained the same tube capacity of 8+1 shells. LAW-12 gas pistons were designed as two pieces; unlike the one-piece design of the SPAS-12, they are not interchangeable. The LAW-12 was discontinued by Franchi shortly before the SPAS-12 was discontinued in 2000.
In the United States, there were two importers of SPAS-12 shotguns. Importation of the SPAS-12 into the United States began in 1982 and ended in 1989 under F.I.E. Corp. In 1989, F.I.E. suffered from major losses in sales due to the president's importation ban, which was a reinterpretation of 18 U.S.C. 925(d)(3) that required firearms to have a "sporting purpose" in order to be imported.
In 1990 American Arms incorporated purchased all remaining inventories of parts and SPAS-12 shotguns from the now-bankrupt F.I.E Corp and began the re-importation of the Franchi SPAS-12 as the (Sporting Purpose Automatic Shotgun) under newly approved restrictions until 1994. The ATF allowed the importation of a SPAS-12 variant from American Arms because its size, weight, bulk and modified configuration were such that it was particularly suitable for traditional shooting sports. [8]
The SPAS-12 was tested by the U.S. Coast Guard and showed promising results but again was not considered cost-effective for a contract over other available suppliers. The Assault Weapons Ban of September 1994 caused American Arms to stop the importation of the SPAS-12 with major losses of sales due to the legal restrictions invoked by the U.S. Assault Weapons Ban. [9]
Both importers placed numerous additional orders for the SPAS-12 that were never complete due to U.S. restrictions throughout importation. This was the reason for such few numbers of shotguns imported into the United States. [10]
In the United States, between September 1994 and September 2004, the Federal Assault Weapons Ban prohibited the transfer and possession of SPAS-12 shotguns manufactured after 13 September 1994. The ban sunset on 13 September 2004 and is no longer in force. [11] However, some U.S. States and territories currently maintain similar bans, including California, [12] Connecticut, [13] District of Columbia, [14] Maryland, [15] Massachusetts, [16] New Jersey, [17] and New York. [18]
A firearm is any type of gun that uses an explosive charge and is designed to be readily carried and operated by an individual. The term is legally defined further in different countries.
A shotgun is a long-barreled firearm designed to shoot a straight-walled cartridge known as a shotshell, which discharges numerous small spherical projectiles called shot, or a single solid projectile called a slug. Shotguns are most commonly used as smoothbore firearms, meaning that their gun barrels have no rifling on the inner wall, but rifled barrels for shooting sabot slugs are also available.
In firearms terminology, an action is the functional mechanism of a breechloading firearm that handles the ammunition cartridges, or the method by which that mechanism works. Actions are technically not present on muzzleloaders, as all those are single-shot firearms with a closed off breech with the powder and projectile manually loaded from the muzzle. Instead, the muzzleloader ignition mechanism is referred to as the lock.
The Benelli M4 is a semi-automatic shotgun produced by Italian firearm manufacturer Benelli Armi SpA, and the fourth and last model of the Benelli Super 90 line of semi-automatic shotguns. The M4 uses a proprietary action design called the "auto-regulating gas-operated" (ARGO) system, which was created specifically for the weapon. Designed in 1998, the M4 was adopted by the armed forces of Italy, the United States, and United Kingdom, among others, and has been used in a variety of conflicts.
The Mossberg 500 is a series of pump-action shotguns manufactured by O.F. Mossberg & Sons. The 500 series comprises widely varying models of hammerless repeaters, all of which share the same basic receiver and action, but differ in bore size, barrel length, choke options, magazine capacity, stock and forearm materials. Model numbers included in the 500 series are the 500, 505, 510, 535, and 590. The Revelation 310 and the New Haven 600 were also variations of the 500 series produced by Mossberg under different names. By 2021, about 11 million M500s had been produced, making it the most-produced shotgun of all time.
Pump action is a type of manual firearm action that is operated by moving a sliding handguard on the gun's forestock. When shooting, the sliding forend is pulled rearward to eject any expended cartridge and typically to cock the hammer or striker, and then pushed forward to load a new cartridge into the chamber. Most pump-action firearms use an integral tubular magazine, although some do use detachable box magazines. Pump-action firearms are typically associated with shotguns, although it has also been used in rifles, grenade launchers, and other types of firearms. A firearm using this operating mechanism is colloquially referred to as a pumpgun.
The Franchi SPAS-15 is a dual-mode 12 gauge combat shotgun manufactured by the Italian company Luigi Franchi S.P.A.
The Type 81 is a Chinese-designed selective-fire, gas-operated 7.62×39mm assault rifle. It replaced the semi-automatic Type 56 carbine as the standard service rifle of the People's Liberation Army during the 1980s. It was also designed as a replacement to both the Type 56 assault rifle, as well as the Type 63 assault rifle, mostly being a further development and design improvement over the Type 63. Later, the Type 81 would be used under the designation Type 87 as testing for the PLA's new 5.8x42mm firearms, namely the QBZ-95.
The Saiga-12 is a shotgun available in a wide range of configurations, patterned after the Kalashnikov series of rifles and named after the Saiga antelope native to Russia. Like the Kalashnikov rifle variants, it is a rotating bolt, long-stroke gas piston operated firearm that feeds from a square magazine. All Saiga-12 configurations are recognizable as Kalashnikov-pattern guns by the large lever-safety on the right side of the receiver, the optic mounting rail on the left side of the receiver and the large top-mounted dust cover held in place by the rear of the recoil spring assembly. Saiga firearms are meant for civilian domestic sale in Russia, and export to international markets.
Wassenaar Arrangement Semi-automatic Rifles are a line of Romanian-designed gas-operated semi-automatic rifles sold in the United States by Century International Arms. The rifles are manufactured in Romania by the Cugir Arms Factory and are a semi-automatic variant of the Pistol Mitralieră model 1963/1965, a Romanian licensed derivative of the Soviet AKM assault rifle. Century imports them and modifies them in order to comply with national legislation before sale to the general public via licensed traders. The WASR series takes its name from the 1996 Wassenaar Arrangement, a multilateral export control regime to monitor and limit the proliferation of certain conventional weapons and dual-use technologies.
The Leader T2 MK5 Series firearms were chambered for the 5.56×45mm NATO cartridge and manufactured by Leader Dynamics of Smithfield, NSW, Australia (1978-1982/1983). The Leader was the brainchild of British weapons designer Charles St. George. It was originally a contender for a 5.56 mm Australian military service rifle to replace the then-issued Lithgow L1A1 SLR and Colt M16A1 rifles. What was unique about this endeavor was that Australia had never designed or manufactured its own commercial gas-operated semi-automatic rifle. The rifle was abandoned when the Steyr AUG was adopted for use by the Australian military.
The SG 550 is an assault rifle manufactured by SIG Sauer AG in Switzerland. "SG" is an abbreviation for Sturmgewehr. The rifle is based on the earlier 5.56×45mm NATO SIG SG 540.
The Volkssturmgewehr is the name of several rifle designs developed by Nazi Germany during the final months of World War II. They share the common characteristic of being greatly simplified as to adapt with the severe lack of resources and industrial capacity in Germany during the final stages of the war. The Volkspistole was a partner program, almost identical, but for pistols instead.
The following are terms related to firearms and ammunition topics.
The Saiga semi-automatic rifles are a family of Russian semi-automatic rifles manufactured by Kalashnikov Concern, which also manufactures the original AK-47 and its variants, Saiga-12 shotguns and Dragunov sniper rifle. Saiga rifles are a sport version of the Kalashnikov rifle, and are marketed for hunting and civilian use. They are sometimes referred to as Saiga Sporters.
An AR-15–style rifle is a lightweight semi-automatic rifle based on or similar to the Colt AR-15 design. The Colt model removed the selective fire feature of its predecessor, the original ArmaLite AR-15, which is a scaled-down derivative of the AR-10 design. It is closely related to the military M16 rifle.
The Vepr-12 is a multipurpose semi-automatic detachable-magazine shotgun, produced by Molot-Oruzhie Ltd. It is patterned after the original Kalashnikov rifle and built on the heavier RPK light machine gun receiver.
Assault weapons legislation in the United States refers to bills and laws that define and restrict or make illegal the manufacture, transfer, and possession of assault weapons. How these firearms are defined and regulated varies from jurisdiction to jurisdiction; generally, this constitutes a list of specific firearms and combinations of features on semiautomatic firearms.
The Heckler & Koch HK 512 is a semi-automatic shotgun of Italian origin. It was developed and produced by Franchi at the request of Heckler & Koch, which took care of marketing and sales.
The Beretta 1301 is a gas-operated semi-automatic shotgun produced by Beretta, and imported by Beretta USA in the United States. The firearm has two distinct models: The 1301 Tactical is intended for tactical self-defense and law enforcement applications whereas the 1301 Competition is designed for practical shooting sports such as Multigun or IPSC Shotgun. Despite its intended applications, it is often used by a minority of hunters and clay pigeon shooters.