Fraunhofer diffraction equation

Last updated

In optics, the Fraunhofer diffraction equation is used to model the diffraction of waves when the diffraction pattern is viewed at a long distance from the diffracting object, and also when it is viewed at the focal plane of an imaging lens. [1] [2]

Contents

The equation was named in honour of Joseph von Fraunhofer although he was not actually involved in the development of the theory. [3]

This article gives the equation in various mathematical forms, and provides detailed calculations of the Fraunhofer diffraction pattern for several different forms of diffracting apertures, specially for normally incident monochromatic plane wave. A qualitative discussion of Fraunhofer diffraction can be found elsewhere.

Definition

When a beam of light is partly blocked by an obstacle, some of the light is scattered around the object, and light and dark bands are often seen at the edge of the shadow – this effect is known as diffraction. [4] The Kirchhoff diffraction equation provides an expression, derived from the wave equation, which describes the wave diffracted by an aperture; analytical solutions to this equation are not available for most configurations. [5]

The Fraunhofer diffraction equation is an approximation which can be applied when the diffracted wave is observed in the far field, and also when a lens is used to focus the diffracted light; in many instances, a simple analytical solution is available to the Fraunhofer equation – several of these are derived below.

In Cartesian coordinates

Diffraction geometry, showing aperture (or diffracting object) plane and image plane, with coordinate system. Diffraction geometry 2.svg
Diffraction geometry, showing aperture (or diffracting object) plane and image plane, with coordinate system.

If the aperture is in xy plane, with the origin in the aperture and is illuminated by a monochromatic wave, of wavelength λ, wavenumber k with complex amplitude A(x,y), and the diffracted wave is observed in the unprimed x,y-plane along the positive -axis, where l,m are the direction cosines of the point x,y with respect to the origin. The complex amplitude U(x,y) of the diffracted wave is given by the Fraunhofer diffraction equation as: [6]

It can be seen from this equation that the form of the diffraction pattern depends only on the direction of viewing, so the diffraction pattern changes in size but not in form with change of viewing distance.

Explicitly, the Fraunhofer diffraction equation is [7] where .

It can be seen that the integral in the above equations is the Fourier transform of the aperture function evaluated at frequencies. [8]

Thus, we can also write the equation in terms of a Fourier transform as: where  is the Fourier transform of A. The Fourier transform formulation can be very useful in solving diffraction problems.

Another form is:

where r and r' represent the observation point and a point in the aperture respectively, k0 and k represent the wave vectors of the disturbance at the aperture and of the diffracted waves respectively, and a0(r' ) represents the magnitude of the disturbance at the aperture.

In polar coordinates

When the diffracting aperture has circular symmetry, it is useful to use polar rather than Cartesian coordinates. [9]

A point in the aperture has coordinates ρ,ω giving: and

The complex amplitude at ρ' is given by A(ρ), and the area dx dy converts to ρ dρ dω, giving

Using the integral representation of the Bessel function: [10] we have

where the integration over ω gives 2π since the equation is circularly symmetric, i.e. there is no dependence on ω.

In this case, we have U(ρ,z) equal to the Fourier–Bessel or Hankel transform of the aperture function, A(ρ)

Example

Here are given examples of Fraunhofer diffraction with a normally incident monochromatic plane wave.

In each case, the diffracting object is located in the z = 0 plane, and the complex amplitude of the incident plane wave is given by where

and the phase is zero at time t = 0.

The time dependent factor is omitted throughout the calculations, as it remains constant, and is averaged out when the intensity is calculated. The intensity at r is proportional to the amplitude times its complex conjugate

These derivations can be found in most standard optics books, in slightly different forms using varying notations. A reference is given for each of the systems modelled here. The Fourier transforms used can be found here.

Narrow rectangular slit

Graph and image of single-slit diffraction Single Slit Diffraction (english).svg
Graph and image of single-slit diffraction

The aperture is a slit of width W which is located along the y-axis,

Solution by integration

Assuming the centre of the slit is located at x = 0, the first equation above, for all values of y, is: [11]

Using Euler's formula, this can be simplified to:

where sinc(p) = sin(p)/p. The sinc function is sometimes defined as sin(πp)/πp and this may cause confusion when looking at derivations in different texts.

This can also be written as: where θ is the angle between z-axis and the line joining x to the origin and sin θx/z when θ << 1.

Fourier transform solution

The slit can be represented by the rect function as: [12]

The Fourier transform of this function is given by where ξ is the Fourier transform frequency, and the sinc function is here defined as sin(πx)/(πx)

The Fourier transform frequency here is x/λz, giving

Note that the sinc function is here defined as sin(x)/(x) to maintain consistency.

Intensity

The intensity is proportional to the square of the amplitude, and is therefore [13]

Apertures

Rectangular aperture

Computer simulation of Fraunhofer diffraction by a rectangular aperture Rectangular diffraction.jpg
Computer simulation of Fraunhofer diffraction by a rectangular aperture

When a rectangular slit of width W and height H is illuminated normally (the slit illuminated at the normal angle) by a monochromatic plane wave of wavelength λ, the complex amplitude can be found using similar analyses to those in the previous section, applied over two independent orthogonal dimensions as: [14] [15] [16]

The intensity is given by

where the x and y axes define the transverse directions on the plane of observation or the image plane (described in the above figure), and R is the distance between the slit center and the point of observation on the image plane.

In practice, all slits are of finite size so produce diffraction on the both transverse directions, along the x (width W defined) and y (height H defined) axes. If the height H of the slit is much greater than its width W, then the spacing of the vertical (along the height or the y axis) diffraction fringes is much less than the spacing of the horizontal (along the width or x axis) fringes. If the vertical fringe spacing is so less by a relatively so large H, then the observation of the vertical fringes is so hard that a person observing the diffracted wave intensity pattern on the plane of observation or the image plane recognizes only the horizontal fringes with their narrow height. This is the reason why a height-long slit or slit array such as a diffraction grating is typically analyzed only in the dimension along the width. If the illuminating beam does not illuminate the whole height of the slit, then the spacing of the vertical fringes is determined by the dimension of the laser beam along the slit height. Close examination of the two-slit pattern below shows that there are very fine vertical diffraction fringes above and below the main spots, as well as the more obvious horizontal fringes.

Circular aperture

Airy diffraction pattern Airy-pattern.svg
Airy diffraction pattern

The aperture has diameter W. The complex amplitude in the observation plane is given by

Solution by integration

Using the recurrence relationship [17] to give

If we substitute and the limits of the integration become 0 and πρW/λz, we get

Putting ρ/z = sin θ, we get

Solution using Fourier–Bessel transform

We can write the aperture function as a step function

The Fourier–Bessel transform for this function is given by the relationship where q/2π is the transform frequency which is equal to ρ/λz and a = W/2.

Thus, we get

Intensity

The intensity is given by: [18]

Form of the diffraction pattern

This known as the Airy diffraction pattern

The diffracted pattern is symmetric about the normal axis.

Aperture with a Gaussian profile

Intensity of a plane wave diffracted through an aperture with a Gaussian profile Gaussian profile.svg
Intensity of a plane wave diffracted through an aperture with a Gaussian profile

An aperture with a Gaussian profile, for example, a photographic slide whose transmission has a Gaussian variation, so that the amplitude at a point in the aperture located at a distance r' from the origin is given by

giving

Solution using Fourier–Bessel transform

The Fourier–Bessel or Hankel transform is defined as where Jν is the Bessel function of the first kind of order ν with ν −1/2.

The Hankel transform is giving and

Intensity

The intensity is given by: [19]

This function is plotted on the right, and it can be seen that, unlike the diffraction patterns produced by rectangular or circular apertures, it has no secondary rings. This can be used in a process called apodization - the aperture is covered by a filter whose transmission varies as a Gaussian function, giving a diffraction pattern with no secondary rings. [20] [21]

Slits

Two slits

The pattern which occurs when light diffracted from two slits overlaps is of considerable interest in physics, firstly for its importance in establishing the wave theory of light through Young's interference experiment, and secondly because of its role as a thought experiment in double-slit experiment in quantum mechanics.

Narrow slits

Geometry of two slit diffraction Two slit diagram3.svg
Geometry of two slit diffraction
Two slit interference using a red laser Laserdiffraction.jpg
Two slit interference using a red laser

Assume we have two long slits illuminated by a plane wave of wavelength λ. The slits are in the z = 0 plane, parallel to the y axis, separated by a distance S and are symmetrical about the origin. The width of the slits is small compared with the wavelength.

Solution by integration

The incident light is diffracted by the slits into uniform spherical waves. The waves travelling in a given direction θ from the two slits have differing phases. The phase of the waves from the upper and lower slits relative to the origin is given by (2π/λ)(S/2)sin θ and −(2π/λ)(S/2)sin θ

The complex amplitude of the summed waves is given by: [22]

Solution using Fourier transform

The aperture can be represented by the function: [23] where δ is the delta function.

We have and giving

This is the same expression as that derived above by integration.

Intensity

This gives the intensity of the combined waves as: [24]

Slits of finite width

Single and double slit diffraction - slit separation is 0.7mm and the slit width is 0.1mm Single slit and double slit3.jpg
Single and double slit diffraction – slit separation is 0.7mm and the slit width is 0.1mm

The width of the slits, W is finite.

Solution by integration

The diffracted pattern is given by: [25]

Solution using Fourier transform

The aperture function is given by: [26]

The Fourier transform of this function is given by where ξ is the Fourier transform frequency, and the sinc function is here defined as sin(πx)/(πx) and

We have or

This is the same expression as was derived by integration.

Intensity

The intensity is given by: [27]

It can be seen that the form of the intensity pattern is the product of the individual slit diffraction pattern, and the interference pattern which would be obtained with slits of negligible width. This is illustrated in the image at the right which shows single slit diffraction by a laser beam, and also the diffraction/interference pattern given by two identical slits.

Gratings

A grating is defined in Principles of Optics by Born and Wolf as "any arrangement which imposes on an incident wave a periodic variation of amplitude or phase, or both". [28]

Narrow slit grating

A simple grating consists of a screen with N slits whose width is significantly less than the wavelength of the incident light with slit separation of S.

Solution by integration

The complex amplitude of the diffracted wave at an angle θ is given by: [29]

since this is the sum of a geometric series.

Solution using Fourier transform

The aperture is given by

The Fourier transform of this function is: [30]

Intensity

Diffraction pattern for 50 narrow-slit grating Grating50.svg
Diffraction pattern for 50 narrow-slit grating
Detail of main maximum in 20 and 50 narrow slit grating diffraction patterns Grating20and 50.svg
Detail of main maximum in 20 and 50 narrow slit grating diffraction patterns

The intensity is given by: [31]

This function has a series of maxima and minima. There are regularly spaced "principal maxima", and a number of much smaller maxima in between the principal maxima. The principal maxima occur when and the main diffracted beams therefore occur at angles:

This is the grating equation for normally incident light.

The number of small intermediate maxima is equal to the number of slits, N 1 and their size and shape is also determined by N.

The form of the pattern for N=50 is shown in the first figure .

The detailed structure for 20 and 50 slits gratings are illustrated in the second diagram.

Finite width slit grating

Diffraction pattern from grating with finite width slits Gratingwide.svg
Diffraction pattern from grating with finite width slits

The grating now has N slits of width W and spacing S

Solution using integration

The amplitude is given by: [32]

Solution using Fourier transform

The aperture function can be written as: [33]

Using the convolution theorem, which says that if we have two functions f(x) and g(x), and we have where denotes the convolution operation, then we also have we can write the aperture function as

The amplitude is then given by the Fourier transform of this expression as:

Intensity

The intensity is given by: [34]

The diagram shows the diffraction pattern for a grating with 20 slits, where the width of the slits is 1/5th of the slit separation. The size of the main diffracted peaks is modulated with the diffraction pattern of the individual slits.

Other gratings

The Fourier transform method above can be used to find the form of the diffraction for any periodic structure where the Fourier transform of the structure is known. Goodman [35] uses this method to derive expressions for the diffraction pattern obtained with sinusoidal amplitude and phase modulation gratings. These are of particular interest in holography.

Extensions

Non-normal illumination

If the aperture is illuminated by a monochromatic plane wave incident in a direction (l0,m0, n0), the first version of the Fraunhofer equation above becomes: [36]

The equations used to model each of the systems above are altered only by changes in the constants multiplying x and y, so the diffracted light patterns will have the form, except that they will now be centred around the direction of the incident plane wave.

The grating equation becomes [37]

Non-monochromatic illumination

In all of the above examples of Fraunhofer diffraction, the effect of increasing the wavelength of the illuminating light is to reduce the size of the diffraction structure, and conversely, when the wavelength is reduced, the size of the pattern increases. If the light is not mono-chromatic, i.e. it consists of a range of different wavelengths, each wavelength is diffracted into a pattern of a slightly different size to its neighbours. If the spread of wavelengths is significantly smaller than the mean wavelength, the individual patterns will vary very little in size, and so the basic diffraction will still appear with slightly reduced contrast. As the spread of wavelengths is increased, the number of "fringes" which can be observed is reduced.

See also

Related Research Articles

<span class="mw-page-title-main">Diffraction</span> Phenomenon of the motion of waves

Diffraction is the interference or bending of waves around the corners of an obstacle or through an aperture into the region of geometrical shadow of the obstacle/aperture. The diffracting object or aperture effectively becomes a secondary source of the propagating wave. Italian scientist Francesco Maria Grimaldi coined the word diffraction and was the first to record accurate observations of the phenomenon in 1660.

<span class="mw-page-title-main">Laplace's equation</span> Second-order partial differential equation

In mathematics and physics, Laplace's equation is a second-order partial differential equation named after Pierre-Simon Laplace, who first studied its properties. This is often written as or where is the Laplace operator, is the divergence operator, is the gradient operator, and is a twice-differentiable real-valued function. The Laplace operator therefore maps a scalar function to another scalar function.

<span class="mw-page-title-main">Ellipsoid</span> Quadric surface that looks like a deformed sphere

An ellipsoid is a surface that can be obtained from a sphere by deforming it by means of directional scalings, or more generally, of an affine transformation.

In physics, the CHSH inequality can be used in the proof of Bell's theorem, which states that certain consequences of entanglement in quantum mechanics cannot be reproduced by local hidden-variable theories. Experimental verification of the inequality being violated is seen as confirmation that nature cannot be described by such theories. CHSH stands for John Clauser, Michael Horne, Abner Shimony, and Richard Holt, who described it in a much-cited paper published in 1969. They derived the CHSH inequality, which, as with John Stewart Bell's original inequality, is a constraint—on the statistical occurrence of "coincidences" in a Bell test—which is necessarily true if an underlying local hidden-variable theory exists. In practice, the inequality is routinely violated by modern experiments in quantum mechanics.

Fourier optics is the study of classical optics using Fourier transforms (FTs), in which the waveform being considered is regarded as made up of a combination, or superposition, of plane waves. It has some parallels to the Huygens–Fresnel principle, in which the wavefront is regarded as being made up of a combination of spherical wavefronts whose sum is the wavefront being studied. A key difference is that Fourier optics considers the plane waves to be natural modes of the propagation medium, as opposed to Huygens–Fresnel, where the spherical waves originate in the physical medium.

In probability theory, the Borel–Kolmogorov paradox is a paradox relating to conditional probability with respect to an event of probability zero. It is named after Émile Borel and Andrey Kolmogorov.

<span class="mw-page-title-main">Airy disk</span> Diffraction pattern in optics

In optics, the Airy disk and Airy pattern are descriptions of the best-focused spot of light that a perfect lens with a circular aperture can make, limited by the diffraction of light. The Airy disk is of importance in physics, optics, and astronomy.

<span class="mw-page-title-main">Sinc function</span> Special mathematical function defined as sin(x)/x

In mathematics, physics and engineering, the sinc function, denoted by sinc(x), has two forms, normalized and unnormalized.

<span class="mw-page-title-main">Bloch sphere</span> Geometrical representation of the pure state space of a two-level quantum mechanical system

In quantum mechanics and computing, the Bloch sphere is a geometrical representation of the pure state space of a two-level quantum mechanical system (qubit), named after the physicist Felix Bloch.

In optics, the Fraunhofer diffraction equation is used to model the diffraction of waves when plane waves are incident on a diffracting object, and the diffraction pattern is viewed at a sufficiently long distance from the object, and also when it is viewed at the focal plane of an imaging lens. In contrast, the diffraction pattern created near the diffracting object and is given by the Fresnel diffraction equation.

<span class="mw-page-title-main">Fresnel diffraction</span> Diffraction

In optics, the Fresnel diffraction equation for near-field diffraction is an approximation of the Kirchhoff–Fresnel diffraction that can be applied to the propagation of waves in the near field. It is used to calculate the diffraction pattern created by waves passing through an aperture or around an object, when viewed from relatively close to the object. In contrast the diffraction pattern in the far field region is given by the Fraunhofer diffraction equation.

<span class="mw-page-title-main">Multiple integral</span> Generalization of definite integrals to functions of multiple variables

In mathematics (specifically multivariable calculus), a multiple integral is a definite integral of a function of several real variables, for instance, f(x, y) or f(x, y, z).

<span class="mw-page-title-main">Directivity</span> Measure of how much of an antennas signal is transmitted in one direction

In electromagnetics, directivity is a parameter of an antenna or optical system which measures the degree to which the radiation emitted is concentrated in a single direction. It is the ratio of the radiation intensity in a given direction from the antenna to the radiation intensity averaged over all directions. Therefore, the directivity of a hypothetical isotropic radiator is 1, or 0 dBi.

Cylindrical multipole moments are the coefficients in a series expansion of a potential that varies logarithmically with the distance to a source, i.e., as . Such potentials arise in the electric potential of long line charges, and the analogous sources for the magnetic potential and gravitational potential.

In mathematics, the Weyl character formula in representation theory describes the characters of irreducible representations of compact Lie groups in terms of their highest weights. It was proved by Hermann Weyl. There is a closely related formula for the character of an irreducible representation of a semisimple Lie algebra. In Weyl's approach to the representation theory of connected compact Lie groups, the proof of the character formula is a key step in proving that every dominant integral element actually arises as the highest weight of some irreducible representation. Important consequences of the character formula are the Weyl dimension formula and the Kostant multiplicity formula.

A ratio distribution is a probability distribution constructed as the distribution of the ratio of random variables having two other known distributions. Given two random variables X and Y, the distribution of the random variable Z that is formed as the ratio Z = X/Y is a ratio distribution.

<span class="mw-page-title-main">Diffraction from slits</span>

Diffraction processes affecting waves are amenable to quantitative description and analysis. Such treatments are applied to a wave passing through one or more slits whose width is specified as a proportion of the wavelength. Numerical approximations may be used, including the Fresnel and Fraunhofer approximations.

In mathematics, the spectral theory of ordinary differential equations is the part of spectral theory concerned with the determination of the spectrum and eigenfunction expansion associated with a linear ordinary differential equation. In his dissertation, Hermann Weyl generalized the classical Sturm–Liouville theory on a finite closed interval to second order differential operators with singularities at the endpoints of the interval, possibly semi-infinite or infinite. Unlike the classical case, the spectrum may no longer consist of just a countable set of eigenvalues, but may also contain a continuous part. In this case the eigenfunction expansion involves an integral over the continuous part with respect to a spectral measure, given by the Titchmarsh–Kodaira formula. The theory was put in its final simplified form for singular differential equations of even degree by Kodaira and others, using von Neumann's spectral theorem. It has had important applications in quantum mechanics, operator theory and harmonic analysis on semisimple Lie groups.

In fluid dynamics, the Oseen equations describe the flow of a viscous and incompressible fluid at small Reynolds numbers, as formulated by Carl Wilhelm Oseen in 1910. Oseen flow is an improved description of these flows, as compared to Stokes flow, with the (partial) inclusion of convective acceleration.

References

  1. Born & Wolf 1999 , p. 427
  2. Jenkins & White 1957 , p. 288
  3. "Fraunhofer, Joseph von (1787-1826) -- from Eric Weisstein's World of Scientific Biography".
  4. Heavens & Ditchburn 1991 , p. 62
  5. Born & Wolf 1999 , p. 425
  6. Lipson, Lipson & Lipson 2011 , p. 231, eq(8.8)
  7. "Fresnel and Fraunhofer Approximations".
  8. Hecht 2002 , p. 540, eq(11.67)
  9. Born & Wolf 1999 , p. 439, Section 8.5.2, eqs (6–8)
  10. Abramowitz & Stegun 1965 , p. 360, Section 9.1.21
  11. Born & Wolf 1999 , p. 436, Section 8.5.1
  12. Hecht 2002 , p. 540
  13. Hecht 2002 , p. 453, eqs (10.17) (10.18)
  14. Hecht, Eugene (2017). "10.2.4 The Rectangular Aperture". Optics (5th ed.). Pearson. pp. 483–488. ISBN   978-1-292-09693-3.
  15. Longhurst 1967 , p. 217
  16. Goodman 2005 , p. 76, eq(4.28)
  17. Whittaker & Watson 1963 , p. 360, example 2
  18. Hecht 2002 , p. 469, eq (10.56)
  19. Hecht 2002 , p. 521, eq (11.2)
  20. Heavens & Ditchburn 1991 , p. 68
  21. Hecht 2002 , p. 543, Figure (11.33)
  22. Jenkins & White 1957 , p. 312, eq (16c)
  23. Hecht 2002 , p. 5, eq (11.4328)
  24. Lipson, Lipson & Lipson 2011 , p. 280, eq (9.3)
  25. Hecht 2002 , p. 451, Section 10.2.2
  26. Hecht 2002 , p. 541
  27. Jenkins & White 1957 , p. 313, eq (16c)
  28. Born & Wolf 1999 , p. 446, Section 8.6.1
  29. Jenkins & White 1957 , p. 330, eq (17a)
  30. Lipson, Lipson & Lipson 2011 , p. 106, eq(4.41)
  31. Born & Wolf 1999 , p. 448, eq(5a)
  32. Born & Wolf 1999 , p. 448, Section 8.6.1, eq (5)
  33. Hecht 2002 , p. 543, The array theorem
  34. Born & Wolf 1999 , p. 451, Section 8.6, eq (10)
  35. Goodman 2005 , p. 78, Sections 4.4.3 and 4.4.4
  36. Lipson, Lipson & Lipson 2011 , p. 232, Section 8.2.2
  37. Born & Wolf 1999 , p. 449, eq (8)