HMS Hermes (1835)

Last updated

H.M.S. Hermes grounded 5th Dec 1853 near Hu-tan-shan river, after chasing Pirates 1853 (cropped).png
History
Naval Ensign of the United Kingdom.svg United Kingdom
NameHMS Hermes
Ordered22 January 1834
Builder Royal Dockyard, Portsmouth
Cost£24,452
Laid downApril 1834
Launched26 June 1835
Completed25 November 1835
CommissionedNovember 1835
Honours and
awards
Second Burmese War 1852
FateSold for breaking October 1864
General characteristics
Class and type Paddle sloop
Displacement1,006 tons
Tons burthen
  • as built 720 49/94 bm
  • lengthened 1842 830 32/94 bm
Length
  • as built
  • 150 ft 0 in (45.72 m) gundeck
  • 128 ft 0 in (39.01 m) keel for tonnage
  • lengthened 1842
  • 170 ft 0 in (51.82 m) gundeck
  • 147 ft 9.5 in (45.047 m) keel for tonnage
Beam
  • 32 ft 9 in (9.98 m) Maximum
  • 32 ft 5 in (9.88 m) for tonnage
Draught
  • 11 ft 6 in (3.51 m) forward
  • 12 ft 0 in (3.66 m) aft
Depth of hold
  • as built
  • 17 ft 0 in (5.18 m)
  • lengthened 1842
  • 18 ft 2 in (5.54 m)
Installed power140 nominal horsepower
PropulsionTwo-cylinder VSE steam engine
Sail plan barque rigged
Speed10.75 kn (19.91 km/h) under power
Armament
  • As built:
  • 2 × 9-pounder (13 12 cwt) brass guns
  • From 1842:
  • 1 × 8-inch (52 cwt) pivot gun
  • 2 × 32-pounder (17 cwt) carronades

HMS Hermes was a Hermes-class wooden paddle sloop of the Royal Navy. She was built at Portsmouth Dockyard. Initially she was used as apackey vessel until her guns were upgraded. She was re-engined and lengthened in 1842 to 43. She spent time on various stations in the Empire. She participated in the storming of Rangoon during the Second Burmese War. She was sold for breaking in October 1864.

Contents

Hermes was the sixth named vessel since it was used for a 12-gun brig sloop, captured from the Dutch (Mercurius) by Sylph at Texel on 12 May 1596 and foundered in January 1797. [1]

Construction

She was ordered on 22 January 1834 from Portsmouth Dockyard. Her keel was laid in April 1834 and launch just over a year later on 25 June 1835. [2] She was initially fitted with Morgan type paddle wheels, however, these were changed in 1838 to cycloidal wheels at Woolwich. [3] She was completed for sea between September and 25 November 1835. Her first cost was £24,452. [4] [Note 1]

Commissioned Service

First Commission

She was commissioned in November 1835 under the command of Lieutenant William Simpson Blount, RN for the Mediterranean packet service. She was fitted with the Cycloidal paddle wheels at Woolwich between April and July 1838 then resumed her service on the Mediterranean packet service.

1840 to 43 Refit

In 1840 she returned to Home Waters for a refit on 30 March 1840. Her engines and boilers were removed between March and May at Woolwich. She was paid off at Woolwich on 5 October 1840. She was towed to Chatham to have her bow lengthened by twenty feet at a cost of £9,037. [5] This work was completed from November 1841 completing in November 1842. Her gundeck was now 170 feet 0 inches (51.82 metres) with the keel measurement for tonnage at 147 feet 9.5 inches (45.05 metres). Her breadth increased by one inch with her depth of hold increasing to 18 feet 2 inches (5.54 metres). Her builder's measure calculation increased to 827 88/94 tons. [6] Upon completion she was towed back to Woolwich to have her machinery fitted. Starting in December she has a 220 nominal horsepower Maudslay 4-cylinder 'Siamese' engine and new boilers installed at a cost of £11,225. Her speed under steam power increased to 8.5 knots. She was then moved to Chatham to finish completing for sea at a cost of £3,303. At this time her guns were changed. [7]

Second Commission

She commissioned on 30 May 1843 under the command of Lieutenant Washington Carr, RN for service on the North America and West Indies Station. [8] She returned to Home Waters, paying off at Chatham on 26 October 1847. [9]

Third Commission

Her third commission commenced on 7 January 1850 under the command of Commander Edmund Gardiner Fishbourne, RN for service on the Cape of Good Hope Station. [10] [11] She soon moved on to the East Indies and China Station. during 1852 she was involved with Second Burmese War, She was in action in May on the Bassein River. In April 1853 she was at Nanling. [12] She ran aground on 5 December 1853 near Hu-tan-shan river, after chasing Pirates. She returned to Home Waters paying off into the Steam Reserve at Woolwich on 10 June 1854. [13]

Fourth Commission

Her last commission started on 13 June 1855 under the command of Commander Henry Coryton, RN [14] for service on the North American and West Indies Station. [15] On 21 February 1856, Commander William E.A. Gordon, RN [16] took command and was assigned to the Cape of Good Hope Station. She returned to Home Waters paying off at Sheerness on 8 June 1860. [17]

Disposition

She was sold to Castle & Beech in October 1864 for breaking at Charlton. [18]

Notes

  1. A total cost accounting for inflation of approximately £2,342,200 in today's money.

Citations

  1. Colledge, Hermes
  2. Lyon Winfield, page 158
  3. Winfield
  4. Winfield
  5. Winfield
  6. Winfield
  7. Winfield
  8. Winfield
  9. Winfield
  10. The Navy List, April 1850, page 142
  11. Winfield
  12. Winfield
  13. Winfield
  14. The Navy List, July 1855, page 155
  15. Winfield
  16. The Navy List, April 1856, page 154
  17. Winfield
  18. Winfield

Related Research Articles

HMS <i>Rattler</i> (1843) Sloop of the Royal Navy

HMS Rattler was a 9-gun steam screw sloop of the Royal Navy, and one of the first British warships to be completed with screw propulsion. She was originally ordered as a paddle wheel 4-gun steam vessel from Sheerness Dockyard on 12 March 1841. She was reordered on 24 February 1842 as a propeller type 9-gun sloop from HM Royal Dockyard, Sheerness, as a new vessel. William Symonds had redesigned the ship as a screw propeller driven vessel.

HMS <i>Acheron</i> (1838) Sloop of the Royal Navy

HMS Acheron was the last Hermes-class wooden paddle sloop ordered for the Royal Navy. She was launched at Sheerness in 1838. She spent two commissions in the Mediterranean before being reclassed as a survey ship in 1847. Between 1848 and 1851 she made a coastal survey of New Zealand, the first such survey since Captain Cook. She was paid off at Sydney and was tender to HMS Calliope. She was sold at Sydney in 1855.

HMS <i>Niger</i> (1846) Sloop of the Royal Navy

HMS Niger was originally slated to be built as a Sampson designed sloop; however, she was ordered as a First-Class sloop with screw propulsion on 20 February 1845 to be built at Woolwich Dockyard, along the design developed by Oliver Lang and with a hull like the Basilisk designed paddle sloops. Her armament and engine were to be like the Encounter Design building at Pembroke. A second vessel (Florentia) was ordered on 26 March 1846 but after her keel was laid at Pembroke Dockyard, her construction was suspended on 6 October 1846 then cancelled three years later, on 22 May 1849. Niger She conducted important propulsion trials, finally proving the superiority of screw propulsion and served in West Africa, the Crimea, China, the East Indies and Australia. She took part in the New Zealand wars in 1860 and was sold for breaking in 1869.

HMS <i>Salamander</i> (1832) Sloop of the Royal Navy

HMS Salamander was one of the initial steam powered vessels built for the Royal Navy. On 10 January 1831 the First Sea Lord gave orders that four paddle vessels be built to competitive designs. The vessels were to be powered by Maudslay, Son & Field steam engines, carry a schooner rig and mount one or two 10-inch shell guns. Initially classed simply as a steam vessel (SV), she was re-classed as a second-class steam sloop when that categorization was introduced on 31 May 1844. Designed by Joseph Seaton, the Master Shipwright of Sheerness, she was initially slated to be built in Portsmouth, and was changed to Sheerness Dockyard. She was launched and completed in 1832, took part in the Second Anglo-Burmese War and was broken up in 1883.

<i>Hermes</i>-class sloop

The Hermes class were a group of four vessels designed by John Edye of the Surveyor's Department to specifications outlined by Captain William Symonds, the Surveyor of the Navy. The design was approved in 1834. The vessels would be powered by a 140 nominal horsepower engine and carry an armament of two brass 9-pounder guns. The ships would be built in three Royal Dockyards, however, the Chatham vessel was transferred to Sheerness in 1837 prior to being laid down. Hermes was re-engined and lengthen in 1842, Megaera was wrecked in Jamaica in 1843. the remaining vessels served on many different stations of the Empire. Acheron was sold in 1855, Hermes went to the Breakers in 1864 and Volcano lasted until 1894.

HMS <i>Dee</i> (1832) Sloop of the Royal Navy

HMS Dee was the first paddle steamer ordered for the Royal Navy, designed to carry a significant armament. She was ordered on 4 April 1827 from Woolwich Dockyard. She was designed by Sir Robert Seppings, Surveyor of the Navy and modified by Oliver Lang. This vessel was considered as new construction as a previous vessel ordered as a flush deck Cherokee-class brig in 1824, had been renamed African in May 1825. She was initially classed as a steam vessel (SV), and in 1837 reclassified as a steam vessel class 2 (SV2). She was converted to a troopship in May 1842 and as a second class sloop in 1846. She was converted into a storeship in 1868. She was broken at Sheerness in 1871.

HMS Rhadamanthus was one of the initial steam powered vessels built for the Royal Navy. On 10 January 1831 the First Sea Lord gave orders that four paddle vessels be built to competitive designs. The vessels were to be powered by Maudslay, Son & Field steam engines, carry a schooner rig and mount one or two 10-inch shell guns. Initially classed simply as a steam vessel (SV), she was re-classed as a second-class steam sloop in 1846. Designed by Thomas Roberts, the Master Shipwright of Plymouth. She was launched and completed in 1832, She was converted into a transport in 1841 then in 1851 she was a troopship and by the 1860s she was a transport again. Her breaking was completed in February 1864.

HMS Medea was one of the initial steam-powered vessels built for the Royal Navy. On 10 January 1831 the new First Lord Sir James Graham, 2nd Baronet gave orders that four paddle vessels be built to competitive designs. The vessels were to be powered by Maudslay, Son & Field steam engines, carry a schooner rig and mount one or two 10-inch shell guns. Initially classed simply as a steam vessel (SV), she was re-classed as a second-class steam sloop when that categorization was introduced on 31 May 1844. Designed by Oliver Lang, the master shipwright of Woolwich. She was launched and completed in 1834, took part in the Syrian Coast Campaign and was broken up in 1867.

HMS Megaera was a Hermes-class wooden paddle sloop of the Royal Navy. She was built at Sheerness Dockyard. She was launched in 1837 and served two commissions before being wrecked at Jamaica in 1843.

HMS Volcano was a Hermes-class wooden paddle sloop of the Royal Navy. She was built at Portsmouth Dockyard. She was launched in 1836. Her first few commissions were on packet service in the Mediterranean and North American and West Indies Stations and on the anti-slavery patrol on the West Coast of Africa. In 1854 she was converted to a factory ship and served in the Baltic during the Russian War. She was sent to China during the Second Opium War as a factory ship. On her return she was assigned to Portsmouth, on Harbour Service as a stationary factory ship. She remained there until sold for breaking in 1894.

HMS Stromboli was initially a Steam Vessel second class designed by Sir William Symonds, Surveyor of the Navy, and built at Portsmouth. She was commissioned and participated in the bombardment of Acre in 1840, during the Russian War she was used as a troop transport in the Baltic in 1854, she was in the Black Sea and the Sea of Azov in 1855. Her last overseas posting was on the South East Coast of America. She was sold for breaking in August 1866.

HMS Vesuvius was initially a Steam Vessel second class designed by Sir William Symonds, Surveyor of the Navy, and built at Sheerness. She was commissioned and participated in the bombardment of Acre in 1840, during the Russian War she was in the Black Sea and the Sea of Azov in 1855. Her last overseas posting was in the West Indies. She was sold for breaking in June 1865.

HMS Alecto was an Alecto-class sloop designed by Sir William Symonds, Surveyor of the Navy. Originally classed as a steam vessel (SV3), her classification would be changed to a Third Class Sloop. She initially served in the Mediterranean, prior to her tug of war with the Rattler. She spent her time in the Americas and mainly on the anti-slavery patrol off the west coast of Africa. She was broken in November 1865

HMS Prometheus was an Alecto-class sloop designed by Sir William Symonds, Surveyor of the Navy. Originally classed as a steam vessel (SV3), her classification would be changed to a Third Class Sloop. She initially served mainly on the west coast of Africa on the anti-slavery patrol except for a brief period on particular service in the Black Sea in late 1855. She was sold on 5 March 1863 for breaking.

HMS Polyphemus was an Alecto-class sloop designed by Sir William Symonds, Surveyor of the Navy. Originally classed as a steam vessel (SV3), her classification would be changed to a Third Class Sloop. She initially served in the Mediterranean, west coast of Africa and the Baltic. She was wrecked on the Baltic side Jutland on 29 January 1856.

HMS Inflexible was a Bulldog-class sloop designed by Sir William Symonds, Surveyor of the Navy. Originally she was ordered as a Driver-class sloop, however, under Admiralty Order of 26 December 1843 she was directed to be built to a new specification. After commissioning she sailed for the East Indies and participated in the last year of the New Zealand War of 1845 to 1847. She then was in the Black Sea for the Russian War followed by the Second Opium War with China. She was sold for breaking in July 1864.

HMS Scourge was a Bulldog-class sloop designed by Sir William Symonds, Surveyor of the Navy. Originally she was ordered as a Driver-class sloop, however, under Admiralty Order of 26 December 1843 she was directed to be built to a new specification. She was initially commissioned for service with the Channel Squadron before moving to the North America and West Indies Station. She then served in the Mediterranean then the west coast of Africa. Her final service was in the Mediterranean. She was broken in 1865.

HMS <i>Bulldog</i> (1845) Sloop of the Royal Navy

HMS Bulldog was a Bulldog-class sloop designed by Sir William Symonds, Surveyor of the Navy. Originally she was ordered as a Driver-class sloop, however, under Admiralty Order of 26 December 1843 she was directed to be built to a new specification. After commissioning she sailed for the Cape of Good Hope. She then was in the Baltic Sea for the Russian War. She carried out ocean sounding for the Atlantic telegraph. She was lost while in action with the Haitians in 1865.

HMS Fury was a Bulldog-class sloop designed by Sir William Symonds, Surveyor of the Navy. She was ordered on 19 February 1844. After commissioning she sailed for the East Indies and participated in action against pirate junks near Vietnam. She then was in the Black Sea for the Crimean War followed by the Second Opium War with China. She was sold for breaking in July 1864.

HMS Rose was a member of the Gibraltar Group of 24-gun sixth rates. After commissioning she spent her career in Home waters and North America on trade protection duties. She was rebuilt at Woolwich between 1722 and 1724. After her rebuild she served in Home Waters, North America, West Indies and the Mediterranean on trade protection. She was sold in 1744.

References