HMS Volcano (1836)

Last updated

History
Naval Ensign of the United Kingdom.svg United Kingdom
NameHMS Volcano
Ordered19 November 1834
Builder Royal Dockyard, Portsmouth
Cost£27,884
Laid downJuly 1835
Launched30 June 1836
Completed17 January 1837
CommissionedDecember 1836
Honours and
awards		China 1856 - 60
FateSold for breaking November 1894
General characteristics
Type Paddle sloop
Displacement1,006 tons
Tons burthen720 49/94 bm
Length
  • 150 ft 8 in (45.9 m) gundeck
  • 128 ft 7.875 in (39.2 m) keel for tonnage
Beam
  • 32 ft 9.375 in (10.0 m) maximum
  • 32 ft 5.375 in (9.9 m) for tonnage
Draught
  • 11 ft 6 in (3.5 m) (forward)
  • 12 ft 0 in (3.7 m) (aft)
Depth of hold18 ft 0.5 in (5.5 m)
Installed power140 nominal horsepower
Propulsion
  • 2-cylinder side lever steam engine
  • Paddles
Sail plan
Complement135
Armament
  • As built:
  • 2 × 9-pounder (13 1⁄2 cwt) brass guns
  • From 1842:
  • 1 × 8-inch (52 cwt) pivot gun
  • 2 × 32-pounder (17 cwt) carronades

HMS Volcano was a Hermes-class wooden paddle sloop of the Royal Navy. She was built at Portsmouth Dockyard. She was launched in 1836. Her first few commissions were on packet service in the Mediterranean and North American and West Indies Stations and on the anti-slavery patrol on the West Coast of Africa. In 1854 she was converted to a factory ship and served in the Baltic during the Russian War. She was sent to China during the Second Opium War as a factory ship. On her return she was assigned to Portsmouth, on Harbour Service as a stationary factory ship. She remained there until sold for breaking in 1894.

Contents

Volcano was the sixth named vessel since it was used for an 8-gun Fireship, purchased 1778, commissioned 31 July 1778 and sold 7 May 1781. [1]

Construction

Ordered on 19 November 1834 from Portsmouth Dockyard, she was laid down in July 1835. She was launched on 30 June 1836. [2] She was completed for sea at Woolwich between 8 October 1836 and 17 January 1837 at a cost of £27,884 [Note 1] including £17,011 for her hull and £8,875 for her machinery. [3]

Commissioned Service

First Commission

She was commissioned in December 1836 under the command of Lieutenant William M'Uwaine, RN for service on the Mediterranean packet service. [4] On 14 May 1838 Lieutenant Joseph West, RN took command. In 1840 she was assigned to the North America and West Indies packet service. [5] She returned to Home Waters paying off on 16 March 1841. [6]

Second Commission

She was recommissioned seven days later still under Lieutenant West. On 2 December 1841 Lieutenant Craven John Featherstone, RN took command. [7] On 6 April 1844 Lieutenant Edward Charles Miller, RN took command. Lieutenant Miller died on 29 September 1845 and Lieutenant John Hay Craig, RN took command on 1 October for service in the Mediterranean. [8] she returned tp Home Waters paying off on 16 February 1849. She was repaired and fitted for sea at Woolwich then Deptford for £9,628. [Note 2]

Third Commission

She was commissioned on 6 December 1850 under Commander William Thomas Rivers, RN at Devonport for the West Coast of Africa. [9] On 21 April 1851 Commander Robert Coote, RN took command. [10] She was at Lagos on 25 November 1851. She returned to Home Waters and paid off at Woolwich on 30 January 1854. [11] At Woolwich Dockyard she was fitted as a depot ship, also known as an Engineer's Workshop, Steam Smithery or Floating Factory. [12] The conversion cost £6,054 [Note 3] plus another £2,565. [Note 4]

First Commission as Floating Factory ship

She was commissioned under Robert Dyer, Master for service in the Baltic during the Russian War on 16 June 1854. [13] On 27 February she was under the command of James H. Ryan, Second Master. At the end of the Russian war she was paid off in 1856. [14] She under went repairs and a refit at Portsmouth including new boilers, Her hull was recoppered, the fore part of the ship was rebuilt and she was given a brig sailing rig completing in 1857. [15]

Second Commission as Floating Factory ship

She was commissioned on 17 March 1857 under John M Hockly, Master for the East Indies and China. [16] She was at Canton and Hong Kong between 1857 and 1859. She returned to Home Waters paying off at Portsmouth into the Steam Reserve on 25 May 1859. [17]

Disposition

HMS Volcano was reduced to Harbour Service in 1862. She remained in Portsmouth until sold to Sidney Castle & Son in November 1894 for breaking at Charlton. [18]

Notes

  1. ↑ A total cost accounting for inflation of approximately £2,566,800 in today's money.
  2. ↑ A cost accounting for inflation of approximately £886,300 in today's money.
  3. ↑ A cost accounting for inflation of approximately £557,300 in today's money.
  4. ↑ A cost accounting for inflation of approximately £236,100 in today's money.

Citations

  1. ↑ Colledge, Volcano
  2. ↑ Lyon Winfield, page 158
  3. ↑ Lyon Winfield, page 158
  4. ↑ Winfield
  5. ↑ Winfield
  6. ↑ Winfield
  7. ↑ Winfield
  8. ↑ Winfield
  9. ↑ Winfield
  10. ↑ Winfield
  11. ↑ Winfield
  12. ↑ Winfield
  13. ↑ Winfield
  14. ↑ Winfield
  15. ↑ Winfield
  16. ↑ Winfield
  17. ↑ Winfield
  18. ↑ Winfield

Related Research Articles

HMS <i>Plumper</i> (1848) Sloop of the Royal Navy

HMS Plumper was part of the 1847 Program, she was ordered on the 25 of April as a steam schooner from Woolwich Dockyard with the name Pincher. However, the reference Ships of the Royal Navy, by J.J. College, (c) 2020 there is no entry that associates this name to this build. The vessel was reordered on August 12 as an 8-gun sloop as designed by John Fincham, Master Shipwright at Portsmouth. Launched in 1848, she served three commissions, firstly on the West Indies and North American Station, then on the West Africa Station and finally in the Pacific Station. It was during her last commission as a survey ship that she left her most enduring legacy; in charting the west coast of British Columbia she left her name and those of her ship's company scattered across the charts of the region. She paid off for the last time in 1861 and was finally sold for breaking up in 1865.

HMS <i>Rattler</i> (1843) Sloop of the Royal Navy

HMS Rattler was a 9-gun steam screw sloop of the Royal Navy, and one of the first British warship to be completed with screw propulsion. She was originally ordered as a paddle wheel 4-gun steam vessel from Sheerness Dockyard on 12 March 1841. She was reordered on 24 February 1842 as a propeller type 9-gun sloop from HM Royal Dockyard, Sheerness as a new vessel. Sir William Symonds had redesigned the ship as a screw propeller driven vessel.

HMS <i>Acheron</i> (1838) Sloop of the Royal Navy

HMS Acheron was the last Hermes-class wooden paddle sloop ordered for the Royal Navy. She was launched at Sheerness in 1838. She spent two commissions in the Mediterranean before being reclassed as a survey ship in 1847. Between 1848 and 1851 she made a coastal survey of New Zealand, the first such survey since Captain Cook. She was paid off at Sydney and was tender to HMS Calliope. She was sold at Sydney in 1855.

HMS <i>Salamander</i> (1832) Sloop of the Royal Navy

HMS Salamander was one of the initial steam powered vessels built for the Royal Navy. On 10 January 1831 the First Sea Lord gave orders that four paddle vessels be built to competitive designs. The vessels were to be powered by Maudslay, Son & Field steam engines, carry a schooner rig and mount one or two 10-inch shell guns. Initially classed simply as a steam vessel (SV), she was re-classed as a second-class steam sloop when that categorization was introduced on 31 May 1844. Designed by Joseph Seaton, the Master Shipwright of Sheerness, she was initially slated to be built in Portsmouth, and was changed to Sheerness Dockyard. She was launched and completed in 1832, took part in the Second Anglo-Burmese War and was broken up in 1883.

HMS <i>Dee</i> (1832) Sloop of the Royal Navy

HMS Dee was the first paddle steamer ordered for the Royal Navy, designed to carry a significant armament. She was ordered on 4 April 1827 from Woolwich Dockyard. She was designed by Sir Robert Seppings, Surveyor of the Navy and modified by Oliver Lang. This vessel was considered as new construction as a previous vessel ordered as a flush deck Cherokee-class brig in 1824, had been renamed African in May 1825. She was initially classed as a steam vessel (SV), and in 1837 reclassified as a steam vessel class 2 (SV2). She was converted to a troopship in May 1842 and as a second class sloop in 1846. She was converted into a storeship in 1868. She was broken at Sheerness in 1871.

HMS <i>Hermes</i> (1835) Sloop of the Royal Navy

HMS Hermes was a Hermes-class wooden paddle sloop of the Royal Navy. She was built at Portsmouth Dockyard. Initially she was used as apackey vessel until her guns were upgraded. She was re-engined and lengthened in 1842 to 43. She spent time on various stations in the Empire. She participated in the storming of Rangoon during the Second Burmese War. She was sold for breaking in October 1864.

HMS Archer was initially ordered as one of two Rifleman type gunvessels on 25 April 1846. With her construction suspended in September 1846, she was reordered on as a sloop on 25 April 1847 to be constructed to a design of John Edye as approved on 25 August. With the exception of two years on Baltic service during the Russian War of 1854 to 1855 she spent the majority on the West Coast of Africa on the anti-slavery patrol. This service involved anti-slavery work on the coasts of the Bight of Benin, and was notoriously unhealthy, with tropical diseases taking a heavy toll of British seamen. One of her commanders died and three others were invalided. Archer was reclassified as a corvette in 1862. She finally returned to Home waters, being sold for breaking in January 1866

HMS <i>Wasp</i> (1850) Sloop of the Royal Navy

HMS Wasp was an Archer type sloop ordered on 25 April 1847 from Deptford Dockyard. Two references stipulate that Parthian, ordered with Archer the year prior was renamed Wasp when ordered as a sloop. However, Parthian remained on the books at Deptford, as a Rifleman type gunvessel until cancelled in June 1849. Therefore Wasp was a new build. She served on many different stations during her career, including West Coast of Africa, in the Mediterranean and Black Sea during the Russian War of 1854 - 55, on the South East Coast of America, Cape of Good Hope where she went aground twice and the East Indies before being sold for breaking in December 1869.

HMS Rhadamanthus was one of the initial steam powered vessels built for the Royal Navy. On 10 January 1831 the First Sea Lord gave orders that four paddle vessels be built to competitive designs. The vessels were to be powered by Maudslay, Son & Field steam engines, carry a schooner rig and mount one or two 10-inch shell guns. Initially classed simply as a steam vessel (SV), she was re-classed as a second-class steam sloop in 1846. Designed by Thomas Roberts, the Master Shipwright of Plymouth. She was launched and completed in 1832, She was converted into a transport in 1841 then in 1851 she was a troopship and by the 1860s she was a transport again. Her breaking was completed in February 1864.

HMS Medea was one of the initial steam powered vessels built for the Royal Navy. On 10 January 1831 the new First Lord Sir James Graham gave orders that four paddle vessels be built to competitive designs. The vessels were to be powered by Maudslay, Son & Field steam engines, carry a schooner rig and mount one or two 10-inch shell guns. Initially classed simply as a steam vessel (SV), she was re-classed as a second-class steam sloop when that categorization was introduced on 31 May 1844. Designed by Oliver Lang, the Master Shipwright of Woolwich. She was launched and completed in 1834, took part in the Syrian Coast Campaign and was broken up in 1867.

HMS Megaera was a Hermes-class wooden paddle sloop of the Royal Navy. She was built at Sheerness Dockyard. She was launched in 1837 and served two commissions before being wrecked at Jamaica in 1843.

HMS Stromboli was initially a Steam Vessel second class designed by Sir William Symonds, Surveyor of the Navy, and built at Portsmouth. She was commissioned and participated in the bombardment of Acre in 1840, during the Russian War she was used as a troop transport in the Baltic in 1854, she was in the Black Sea and the Sea of Azov in 1855. Her last overseas posting was on the South East Coast of America. She was sold for breaking in August 1866.

HMS Vesuvius was initially a Steam Vessel second class designed by Sir William Symonds, Surveyor of the Navy, and built at Sheerness. She was commissioned and participated in the bombardment of Acre in 1840, during the Russian War she was in the Black Sea and the Sea of Azov in 1855. Her last overseas posting was in the West Indies. She was sold for breaking in June 1865.

HMS Alecto was an Alecto-class sloop designed by Sir William Symonds, Surveyor of the Navy. Originally classed as a steam vessel (SV3), her classification would be changed to a Third Class Sloop. She initially served in the Mediterranean, prior to her tug of war with the Rattler. She spent her time in the Americas and mainly on the anti-slavery patrol off the west coast of Africa. She was broken in November 1865

HMS Prometheus was an Alecto-class sloop designed by Sir William Symonds, Surveyor of the Navy. Originally classed as a steam vessel (SV3), her classification would be changed to a Third Class Sloop. She initially served mainly on the west coast of Africa on the anti-slavery patrol except for a brief period on particular service in the Black Sea in late 1855.. She was sold on 5 March 1863 for breaking.

HMS Polyphemus was an Alecto-class sloop designed by Sir William Symonds, Surveyor of the Navy. Originally classed as a steam vessel (SV3), her classification would be changed to a Third Class Sloop. She initially served in the Mediterranean, west coast of Africa and the Baltic. She was wrecked on the Baltic side Jutland on 29 January 1856.

HMS Inflexible was a Bulldog-class sloop designed by Sir William Symonds, Surveyor of the Navy. Originally she was ordered as a Driver-class sloop, however, under Admiralty Order of 26 December 1843 she was directed to be built to a new specification. After commissioning she sailed for the East Indies and participated in the last year of the New Zealand War of 1845 to 1847. She then was in the Black Sea for the Russian War followed by the Second Opium War with China. She was sold for breaking in July 1864.

HMS Scourge was a Bulldog-class sloop designed by Sir William Symonds, Surveyor of the Navy. Originally she was ordered as a Driver-class sloop, however, under Admiralty Order of 26 December 1843 she was directed to be built to a new specification. She was initially commissioned for service with the Channel Squadron before moving to the North America and West Indies Station. She then served in the Mediterranean then the west coast of Africa. Her final service was in the Mediterranean. She was broken in 1865.

HMS Bulldog was a Bulldog-class sloop designed by Sir William Symonds, Surveyor of the Navy. Originally she was ordered as a Driver-class sloop, however, under Admiralty Order of 26 December 1843 she was directed to be built to a new specification. After commissioning she sailed for the Cape of Good Hope. She then was in the Baltic Sea for the Russian War. She carried out ocean sounding for the Atlantic telegraph. She was lost while in action with the Haitians in 1865.

HMS Fury was a Bulldog-class sloop designed by Sir William Symonds, Surveyor of the Navy. She was ordered on 19 February 1844. After commissioning she sailed for the East Indies and participated in action against pirate junks near Vietnam. She then was in the Black Sea for the Russian War followed by the Second Opium War with China. She was sold for breaking in July 1864.

References

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.