Company type | Subsidiary |
---|---|
Industry | Firearms |
Founded | 1871 |
Headquarters | |
Key people |
|
Products |
|
Website | H&R Website |
Harrington & Richardson Arms Company (or H&R) (formerly H&R 1871 LLC) is an American brand of firearms and a subsidiary of JJE Capital Holdings. H&R ceased independent production February 27, 2015. [1]
The original H&R firm was in business for over a century from 1871 to 1986. [2]
Frank Wesson, brother of Daniel B. Wesson who co-founded Smith & Wesson, started a firearms manufacturing firm in 1859, sharing an early patent with Nathan Harrington. Wesson produced two trigger rifles and spur trigger pistols and pocket rifles/shotguns popular for short length holster models such as the discontinued topper compact pocket shotguns. He started a brief partnership in 1871 with Harrington's nephew Gilbert Henderson Harrington, as Wesson & Harrington, until Harrington bought him out in 1874.
In 1875 Harrington and another former Wesson employee, William Augustus Richardson, formed the new Harrington & Richardson Company. In 1888 the firm was incorporated as The Harrington & Richardson Arms Company. Their original capital investment was $75,000. Harrington was president, Richardson was treasurer, and George F. Brooks was secretary. After the deaths of Harrington and Richardson in 1897, Brooks became the manager and the company was held by heirs Edwin C. Harrington (Gilbert Harrington's son) and Mary A. Richardson (William Richardson's wife).
In 1894 the company opened a new facility on Park Avenue in Worcester, Massachusetts. The factory was expanded again after a few years. Original rifles and shotguns from these dates are scarce because of their limited production and discontinued parts.
In 1950 the company opened a new facility on Cockburn street in Drummondville, Québec, Canada.
In the 1960s H&R was acquired by the Kidde corporation and run by the Rowe family. Warranty cards were sent to 'Industrial Rowe', Gardner, Massachusetts. [3] The original H&R company went out of business in 1986, and the building was demolished. [4]
A new company, H&R 1871, Inc., was formed in 1991 and started production of revolvers, single-shot rifles and shotguns using original H&R designs. H&R 1871, Inc. assets were subsequently sold to H&R 1871, LLC., a Connecticut LLC owned by Marlin Firearms Company in November 2000. H&R 1871, LLC. did not extend their product warranty to H&R guns made prior to the LLC's takeover.
Marlin, including all its H&R assets, was later acquired by Remington Arms Company in December, 2007. H&R 1871, LLC production was moved to Ilion, N.Y. (the site of Remington's original manufacturing plant) in late 2008, while their corporate offices are co-located with Remington Arms in Madison, N.C. (HR1871.com and Remington.com). [ citation needed ] Remington, along with its Marlin and H&R subsidiaries, are now part of the Remington Outdoor Company. H&R 1871 production ceased 27 February 2015.
In the bankruptcy auction of Remington Outdoor Company the company was sold to JJE Capital Holdings, LLC. [5] This sale, however, still needs court approval. [6] JJE currently owns several firearms manufacturing companies, including Lead Star Arms and Palmetto State Armory. [7] Though there has been no official statement, Palmetto State Arms' social media indicates that JJE may produce M1 Garand rifles under the H&R brand. [8]
Some of the other factory addresses that Harrington & Richardson has used:
H&R built flare guns during World War I and a variety of military firearms during WW 2 including the Reising submachine gun, and a .22 cal training rifle for the USMC called the Leatherneck in several models. H&R was granted a contract to produce the M1 rifle during the Korean War, but the first deliveries of the rifles were not made until after the armistice. H&R was the exclusive manufacturer of the US test version of the FN FAL, designated the T48 rifle, in the trials to select a replacement service rifle for the M1 Garand, but the US Army Ordnance Department instead adopted the M1-derived T44 as "US Rifle M-14", awarding H&R one of three contracts to produce the M14 rifle during that rifle's production cycle (1959–1964). H&R also manufactured M16A1 rifles during the Vietnam War and is one of only four manufacturers (along with Colt, Fabrique Nationale, & GM Hydramatic Division) to have ever made an official M16 variant for the U.S. Military. [2] Due to their relative scarcity, all H&R military weapons are considered highly desirable by collectors.
Note: Pre-1898 solid frame revolvers were designed for use with black powder loads. Using smokeless powder rounds with these revolvers may cause damage to the revolver and/or injury to the user.
Note: Many of the above guns are stamped as "H&R .22 Special" / ".22 W.R.F." or ".22 Winchester Rim Fire"
H&R produced muzzle loading firearms under the Huntsman and Sidekick models, during two different periods. The first period of muzzleloaders used a push in style breech plug and was available in 12-gauge, .58 caliber,and .45 caliber. After reports of hang fires causing injuries and mishaps this model was discontinued in the late seventies.
The Huntsman name returned on a newly redesigned muzzle loading rifle in the mid-nineties, there were two models produced in this period, marketed under both the H&R and New England Firearms brands as the Huntsman and the Sidekick. Both were based on the new threaded breech plug design; the Huntsman had the same lug pattern as the Pardner Shotgun and Handirifle lines produced at the time allowing for the Huntsman Barrel to be fitted to those actions while the sidekick had a shorter lug to pivot pin distance. The difference in the barrel lug position made the Huntsman applicable to standard firearms laws requiring a background check as centerfire and shotgun barrels could be exchanged on the same receiver, while the Sidekick was considered a muzzle loading firearm and did not require a background check for purchase. The Huntsman and Sidekick models were available in blued and stainless finish, fiber optic sights, and 24" or 26"(magnum) 1 in 28" twist barrels.
The Huntsman barrel was available through the barrel accessory program on rifle or shotgun frames
The Huntsman and Sidekick muzzle loaders used a telescoping threaded ramrod that was designed to be able to be placed forward of the forearm lug and still match barrel length. The rod would be used to place the projectile the majority of the way down the barrel with the rod collapsed, then the rod would be extended in order to fully seat the projectile on the charge.
The new breech plug design utilized an orange Zytel plastic primer carrier that aligned the primer over the breech plug, could be removed easily with gloved or cold hands, and served as a flag indicator that the firearm was primed. There were two different threaded breech plugs that were designed for the Huntsman and Sidekick lines, one 5/8 and the other 7/8 that utilized a proprietary tool to fit in a slotted head. The 7/8 was introduced first and was redesigned with the later production utilizing the 5/8 design.
Numerous aftermarket breech plugs were designed and marketed for the Huntsman and Sidekick line offering the ability to use a bare primer, percussion caps, musket caps, and primed pistol cartridges like the later introduced Remington 700 ML.
H&R1871 offered a barrel accessory program that allowed owners to send in and have additional barrels fitted to their existing frames. The program offered rifle, shotgun, and muzzle loading barrels to be fitted to receivers produced after 1987. The barrel accessory program was discontinued in 2014.
In the mid-1880s, Harrington & Richardson developed the proprietary 32 Harrington & Richardson (.32 H&R) cartridge for their large frame 6-shot .32 cal revolvers, specifically the Manual Ejecting and Automatic Ejection Double Action Revolvers. [9] [22] The 32 H&R cartridge was dimensionally longer than many other contemporary .32 caliber pistol cartridges, including the .32 S&W, .32 Short Colt, and .32 Long Colt, and was loaded with a stout 15 grains of black powder over an 88 grain projectile (compared to the 10 grain charge of the contemporary .32 S&W, or the 13 grain charge of the contemporary .32 Long Colt). This hot loading at the time made the .32 H&R almost as powerful as the .32-20 Winchester rifle cartridge. The cartridge can also be identified by a distinct groove cut into the lead bullet just outside of the neck of the case.
Like the .32 Long Colt, The black powder .32 H&R was eventually rendered obsolete by the popularity of the .32 S&W Long introduced in 1896 and the development of smokeless powders. Note that the black powder .32 H&R developed in the 1880s should not be confused with the modern smokeless powder .32 H&R Magnum, developed over 100 years later in 1984.
In 1983, Harrington & Richardson worked with Federal Cartridge Company to jointly develop the .32 H&R Magnum. [23] The .32 H&R Magnum is produced by lengthening the .32 S&W Long case by .155", to 1.075".
The .32 H&R Magnum offers substantially more performance than most other .32 caliber handgun cartridges, such as the .32 ACP, and is considered an effective small-game hunting cartridge. Its higher velocity [24] offers a flat trajectory, while the light weight of the bullet results in low recoil.
In firearm designs, the term single-shot refers to guns that can hold only a single round of ammunition inside and thus must be reloaded manually after every shot. Compared to multi-shot repeating firearms ("repeaters"), single-shot designs have no moving parts other than the trigger, hammer/firing pin or frizzen, and therefore do not need a sizable receiver behind the barrel to accommodate a moving action, making them far less complex and more robust than revolvers or magazine/belt-fed firearms, but also with much slower rates of fire.
A cartridge, also known as a round, is a type of pre-assembled firearm ammunition packaging a projectile, a propellant substance and an ignition device (primer) within a metallic, paper, or plastic case that is precisely made to fit within the barrel chamber of a breechloading gun, for convenient transportation and handling during shooting. Although in popular usage the term "bullet" is often used to refer to a complete cartridge, the correct usage only refers to the projectile.
A derringer is a small handgun that is neither a revolver, semi-automatic pistol, nor machine pistol. It is not to be confused with mini-revolvers or pocket pistols, although some later derringers were manufactured with the pepperbox configuration. The modern derringer is often multi barreled, and is generally the smallest usable handgun of any given caliber and barrel length due to the lack of a moving action, which takes up more space behind the barrel. It is frequently used by women because it is easily concealable in a purse or a stocking.
A rim-fire is a type of metallic cartridge used in firearms where the primer is located within a hollow circumferential rim protruding from the base of its casing. When fired, the gun's firing pin will strike and crush the rim against the edge of the barrel breech, sparking the primer compound within the rim, and in turn ignite the propellant within the case. Invented in 1845 by Louis-Nicolas Flobert, the first rimfire metallic cartridge was the .22 BB Cap cartridge, which consisted of a percussion cap with a bullet attached to the top. While many other different cartridge priming methods have been tried since the early 19th century, such as teat-fire and pinfire, only small caliber rimfire cartridges have survived to the present day with regular use. The .22 Long Rifle rimfire cartridge, introduced in 1887, is by far the most common ammunition found in the world today in terms of units manufactured and sold.
Savage Arms is an American gunmaker based in Westfield, Massachusetts, with operations in Canada and China. Savage makes a variety of rimfire and centerfire rifles, as well as Stevens single-shot rifles and shotguns. The company is best known for the Model 99 lever-action rifle, no longer in production, and the .300 Savage. Savage was a subsidiary of Vista Outdoor until 2019 when it was spun off.
Ethan Allen was a major American arms maker from Massachusetts. He is unrelated to the revolutionary Ethan Allen. His first firearm, the "Pocket rifle" was developed in 1836, and his first patent was granted in 1837.
The .410 bore (10.4 mm) is one of the smallest caliber of shotgun shell commonly available. A .410 bore shotgun loaded with shot shells is well suited for small game hunting and pest control. The .410 started off in the United Kingdom as a garden gun along with the .360 and the No. 3 bore (9 mm) rimfire, No. 2 bore (7 mm) rimfire, and No. 1 bore (6 mm) rimfire. .410 shells have similar base dimensions to the .45 Colt cartridge, allowing many single-shot firearms, as well as derringers and revolvers chambered in that caliber, to fire .410 shot shells without any modifications.
The .22 Winchester Magnum Rimfire, also known as the .22 WMR, .22 Magnum, .22 WMRF, .22 MRF, or .22 Mag, is a rimfire cartridge. Originally loaded with a bullet weight of 40 grains (2.6 g) delivering velocities in the 2,000 feet per second (610 m/s) range from a rifle barrel, .22 WMR is now loaded with bullet weights ranging from 50 grains (3.2 g) at 1,530 feet per second (470 m/s) to 30 grains (1.9 g) at 2,200 feet per second (670 m/s).
Marlin Firearms is an American manufacturer of semi-automatic, lever-action and bolt-action rifles. In the past the company made shotguns, derringers, and revolvers. Marlin owned the firearm manufacturer H&R Firearms. In 2007, Remington Arms, part of the Remington Outdoor Company, acquired Marlin Firearms. Remington produced Marlin-brand firearms at its Kentucky and New York manufacturing facilities. In 2020, Sturm, Ruger & Co. bought the Marlin business from bankrupt Remington Outdoor Company.
Thompson/Center Arms was an American firearms company based in Springfield, Massachusetts. The company was best known for its line of interchangeable-barrel, single-shot pistols and rifles. Thompson/Center also manufactured muzzle-loading rifles and was credited with creating the resurgence of their use in the 1970s.
In American English, a pocket pistol is any small, pocket-sized semi-automatic pistol, and is suitable for concealed carry in a pocket or a similar small space.
The Smith & Wesson Model 17 is a six-shot double-action revolver chambered for .22 LR. It is built on Smith & Wesson's medium-sized K-frame.
North American Arms is a United States company, headquartered in Provo, Utah, that manufactures pocket pistols and mini-revolvers, also called mouse guns. The company was originally named Rocky Mountain Arms when it was founded in 1972. In 1974 it was bought by new owners who renamed the company North American Manufacturing (NAM) and then North American Arms (NAA).
An antique firearm is a term used to describe a firearm that was designed and manufactured prior to the beginning of the 20th century. Although the exact definition of what constitutes an "antique firearm" varies between countries, the advent of smokeless powder or the start of the Boer War are often used as cut-off dates. Antique firearms are usually collected because of their historical interest and/or their monetary value.
A handgun is a firearm designed to be usable with only one hand. It is distinguished from a long gun which needs to be held by both hands and braced against the shoulder. Handguns have shorter effective ranges compared to long guns, and are much harder to shoot accurately. While most early handguns are single-shot pistols, the two most common types of handguns used in modern times are revolvers and semi-automatic pistols, although other handguns such as derringers and machine pistols also see infrequent usage.
.22 caliber, or 5.6 mm, refers to a common firearms bore diameter of 0.22 inch (5.6 mm) in both rimfire and centerfire cartridges.
Freedom Arms is a Freedom, Wyoming based firearm manufacturing company, known for producing powerful single-action revolvers. The company was founded in 1978 by Wayne Baker and Dick Casull to produce the Mini-Revolver, then later a revolver chambered in Casull's powerful .454 Casull revolver cartridge. This 5-shot revolver was the Model 83. Freedom Arms currently makes a single-shot pistol in addition to their revolvers.
Chiappa Firearms, Armi Sport di Chiappa, is an Italian firearms manufacturing company based in Brescia. It was founded in 1958 by Ezechiele Chiappa as Armi Sport. Total unit production is around 60,000 per year. Its U.S. headquarters are in Dayton, Ohio.
Merwin, Hulbert, and Co. or Merwin Hulbert was an American firearms designer and marketer based in New York City which produced revolvers and rifles from 1874 to 1896. The firearms were manufactured by a subsidiary company, Hopkins & Allen of Norwich, Connecticut. Merwin Hulbert's designs had influenced other gunmakers of the time, such as Meriden Firearms Co., Harrington & Richardson, Forehand & Wadsworth, and Iver Johnson.
The Smith & Wesson Model No. 2 Army a.k.a. Model No. 2 Old Model Smith & Wesson Revolver was Smith & Wesson's first .32 caliber revolver, intended to combine the small size and convenience of the Smith & Wesson Model 1 .22 rimfire with a larger caliber. Chambered in the .32 rimfire long caliber, its cylinder held 6 shots. It was manufactured 1861 - 1874, with a total production of 77,020.
{{cite web}}
: CS1 maint: archived copy as title (link)