High Bridge of Kentucky

Last updated

High Bridge
High Bridge Of Kentucky.jpg
An aerial view of the High Bridge
Coordinates 37°49′00″N84°43′12″W / 37.8168°N 84.7200°W / 37.8168; -84.7200 (High Bridge)
Carries Norfolk Southern Railway
Crosses Kentucky River
Locale Jessamine & Mercer Counties, Kentucky, United States
Characteristics
Design Truss
Total length1,125 feet (343 m)
Height275 feet (84 m) (or 308 ft.)
History
Designer Charles Shaler Smith (1876)
Gustav Lindenthal (1911)
Opened1877;148 years ago (1877)
Location
High Bridge of Kentucky

The High Bridge is a railroad bridge crossing the Kentucky River Palisades, in Kentucky. The bridge, about 275 feet over the river below, connects Jessamine and Mercer counties. It was formally dedicated in 1879, [1] and is the first cantilever bridge built in the United States. It has a three-span continuous under-deck truss, which is used by Norfolk Southern Railway to carry trains between Lexington and Danville. The High Bridge is a National Historic Civil Engineering Landmark. [2]

Contents

History

High Bridge, viewed from Jessamine County High Bridge of Kentucky.jpg
High Bridge, viewed from Jessamine County

In 1851, the Lexington & Danville Railroad, with Julius Adams as chief engineer, retained John A. Roebling (who later designed the Brooklyn Bridge) to build a railroad suspension bridge across the Kentucky River for a line connecting Lexington and Danville, Kentucky, west of the confluence of the Dix and Kentucky rivers. [1] In 1855, the company ran out of money, having built only stone towers and anchorages.

The project was resumed by the Cincinnati Southern Railway in 1873 following a proposal by C. Shaler Smith for an innovative cantilever design, using Roebling's stone towers as anchors. [1] The bridge was erected with a three-span continuous under-deck truss, and was opened in 1877. [3] It was 275 feet (84 m) tall and 1,125 feet (343 m) long: the tallest bridge above a navigable waterway in North America and the tallest railroad bridge in the world until the early 20th century. Construction was completed using 3,654,280 pounds of iron at a total cost of $404,373.31. [1] In 1879 President Rutherford B. Hayes and Gen. William Tecumseh Sherman attended the dedication. [4]

Around 1908, Kentucky River High Bridge and the surrounding area was a popular destination for local Kentucky artist Paul Sawyier. Sawyier made many friends living in the area and the landscape was the subject of many of his famous paintings.  In addition to making many friends with local residents, he met the love of his life, Mary Thomas (Mayme) Bull during her travels to the Kentucky River area.  She became the subject of one of his paintings in 1908, ‘Portrait of Mayme Bull in River Landscape’. [5]

After years of heavy railroad use, the bridge was rebuilt by Gustav Lindenthal in 1911. Lindenthal reinforced the foundations and rebuilt the bridge around the original structure. To keep railroad traffic flowing, the track deck was raised by 30 feet during construction and a temporary trestle was constructed. [6] In 1929, an additional set of tracks was built to accommodate increased railroad traffic and the original limestone towers were removed. [6]

Although the last passenger train was withdrawn from this route in 1970, the bridge continues to be used by Norfolk Southern freight trains. The bridge site can be reached by road via Kentucky State Route 29. [6] In 2005 state and county officials jointly reopened a nearby park which had been closed since the mid-1960s. This included a restored open-air dance pavilion, first used in the 19th century; as well as a new playground, picnic area, and viewing platform that overlooks the bridge and river's edge from the top of the palisades. [7]

See also

Related Research Articles

<span class="mw-page-title-main">Suspension bridge</span> Type of bridge

A suspension bridge is a type of bridge in which the deck is hung below suspension cables on vertical suspenders. The first modern examples of this type of bridge were built in the early 1800s. Simple suspension bridges, which lack vertical suspenders, have a long history in many mountainous parts of the world.

<span class="mw-page-title-main">John A. Roebling</span> German-American engineer (1806–1869)

John Augustus Roebling was a German-born American civil engineer. He designed and built wire rope suspension bridges, in particular the Brooklyn Bridge, which has been designated as a National Historic Landmark and a National Historic Civil Engineering Landmark.

<span class="mw-page-title-main">John A. Roebling Suspension Bridge</span> Suspension bridge between the Ohio River

The John A. Roebling Suspension Bridge is a suspension bridge that spans the Ohio River between Cincinnati, Ohio, and Covington, Kentucky. When opened on December 1, 1866, it was the longest suspension bridge in the world at 1,057 feet (322 m) main span, which was later overtaken by John A. Roebling's most famous design of the 1883 Brooklyn Bridge at 1,595.5 feet (486.3 m). Pedestrians use the bridge to get between the hotels, bars, restaurants, and parking lots in Northern Kentucky. The bar and restaurant district at the foot of the bridge on the Kentucky side is known as Roebling Point.

<span class="mw-page-title-main">High Bridge, Kentucky</span> Unincorporated community in Kentucky, United States

High Bridge is an unincorporated community and census-designated place in Jessamine County, Kentucky, United States. As of the 2010 census it had a population of 242. It lies along the lower reaches of the Kentucky River across from the confluence of the Dix River with the Kentucky. The community is part of the Lexington–Fayette Metropolitan Statistical Area.

<span class="mw-page-title-main">Cantilever bridge</span> Bridge built using cantilevers

A cantilever bridge is a bridge built using structures that project horizontally into space, supported on only one end. For small footbridges, the cantilevers may be simple beams; however, large cantilever bridges designed to handle road or rail traffic use trusses built from structural steel, or box girders built from prestressed concrete.

<span class="mw-page-title-main">Ross Island Bridge</span> Bridge in Portland, Oregon

The Ross Island Bridge is a cantilever truss bridge that spans the Willamette River in Portland, Oregon. It carries U.S. Route 26 across the river between southwest and southeast Portland. The bridge opened in 1926 and was designed by Gustav Lindenthal and honors Oregon pioneer Sherry Ross. It is named for its proximity to Ross Island. Although it looks like a deck arch bridge, it is a cantilever deck truss bridge, a rare type in Oregon.

<span class="mw-page-title-main">Wheeling Suspension Bridge</span> Bridge in West Virginia, United States

The Wheeling Suspension Bridge is a suspension bridge spanning the main channel of the Ohio River at Wheeling, West Virginia. It was the largest suspension bridge in the world from 1849 until 1851. Charles Ellet Jr. designed it and supervised construction of what became the first bridge to span a major river west of the Appalachian Mountains. It linked the eastern and western section of the National Road, and became especially strategically important during the American Civil War. Litigation in the United States Supreme Court concerning its obstruction of the new high steamboat smokestacks eventually cleared the way for other bridges, especially needed by expanding railroads. Because this bridge was designed during the horse-and-buggy era, 2-ton weight limits and vehicle separation requirements applied in later years until it was closed to automobile traffic in September 2019.

The Eastern Kentucky Railway was a railroad in northeastern Kentucky, United States. It served mainly mine traffic, running north from Webbville through Grayson to Riverton on the Ohio River and Chesapeake and Ohio Railway.

<span class="mw-page-title-main">Niagara Falls Suspension Bridge</span> Defunct bridge spanning the Niagara River

The Niagara Falls Suspension Bridge stood from 1855 to 1897 across the Niagara River and was the world's first working railway suspension bridge. It spanned 825 feet (251 m) and stood 2.5 miles (4.0 km) downstream of Niagara Falls, where it connected Niagara Falls, Ontario to Niagara Falls, New York. Trains used the upper of its two decks, while pedestrians and carriages used the lower. The bridge was the idea of Canadian politicians, and it was built by an American company and a Canadian company. It was most commonly called the Suspension Bridge, although other names included Niagara Railway Suspension Bridge, Niagara Suspension Bridge, and its official American name of the International Suspension Bridge.

<span class="mw-page-title-main">Gustav Lindenthal</span> American civil engineer

Gustav Lindenthal was a civil engineer who designed the Queensboro and Hell Gate bridges in New York City, among other bridges. Lindenthal's work was greatly affected by his pursuit for perfection and his love of art. Having received little formal education and no degree in civil engineering, Lindenthal based his work on his prior experience and techniques used by other engineers of the time.

<span class="mw-page-title-main">Huey P. Long Bridge (Jefferson Parish)</span> Road and railroad bridge in Louisiana, U.S.

The Huey P. Long Bridge, located in Jefferson Parish, Louisiana, is a cantilevered steel through-truss bridge that carries a two-track railroad line over the Mississippi River at mile 106.1, with three lanes of US 90 on each side of the central tracks. It is several kilometers upriver from the city of New Orleans. The East Bank entrance is at Elmwood, Louisiana, and the West Bank at Bridge City.

<span class="mw-page-title-main">Purple People Bridge</span> Bridge in Kentucky and Cincinnati, Ohio

The Purple People Bridge is a pedestrian-only bridge that stretches 2,670 feet over the Ohio River, connecting Newport, Kentucky to downtown Cincinnati, Ohio.

<span class="mw-page-title-main">Frisco Bridge</span> Bridge in Arkansas and Memphis, Tennessee

The Frisco Bridge, previously known as the Memphis Bridge, is a cantilevered through truss bridge carrying a rail line across the Mississippi River between West Memphis, Arkansas, and Memphis, Tennessee.

<span class="mw-page-title-main">Quincy Rail Bridge</span> Bridge in Missouri and Quincy, Illinois

The Quincy Rail Bridge is a truss bridge that carries a rail line across the Mississippi River between West Quincy, Missouri, and Quincy, Illinois, USA. It was originally constructed in 1868 for the Chicago, Burlington and Quincy Railroad, a predecessor of BNSF Railway.

<span class="mw-page-title-main">Milton–Madison Bridge</span> Continuous truss bridge that connects Milton, Kentucky and Madison, Indiana across the Ohio river

The Milton–Madison Bridge is a continuous truss bridge that connects Milton, Kentucky and Madison, Indiana. It carries approximately 10,000 cars a day.

<span class="mw-page-title-main">AJX Bridge over South Fork and Powder River</span> United States historic place

The AJX Bridge is a historic Pratt truss bridge in southwestern Johnson County, Wyoming. The bridge was built in 1931 across the South Fork of the Powder River near Kaycee, Wyoming. AJX Bridge was built to provide a river crossing for U.S. Route 87. It was placed on the National Register of Historic Places in 1985 as part of a Multiple Property Submission devoted to historic bridges in Wyoming.

<span class="mw-page-title-main">Young's High Bridge</span> Bridge in Kentucky, United States

Young's High Bridge is a former railroad bridge near Tyrone, Kentucky, USA, that spans the Kentucky River between Anderson County, Kentucky and Woodford County, Kentucky for the Louisville Southern Railroad. The cantilever bridge, named in honor of William Bennett Henderson Young, was constructed in 1889, and the first train crossed over on August 24, 1889. The bridge is 1,659 feet in length, is 283 feet above the river, and includes a 551 foot long cantilever span.

<span class="mw-page-title-main">Quechee Gorge Bridge</span> United States historic place

The Quechee Gorge Bridge is a historic bridge, carrying U.S. Route 4 (US 4) across Quechee Gorge, near the Quechee village of Hartford, Vermont. Built in 1911, it is Vermont's oldest surviving steel arch bridge. It was listed on the National Register of Historic Places in 1990.

The Fink truss is a commonly used truss in residential homes and bridge architecture. It originated as a bridge truss although its current use in bridges is rare.

References

  1. 1 2 3 4 Griggs, Frank (August 2015). "Kentucky River High Bridge". Structure Magazine.
  2. Griggs, Francis (2002). "Kentucky River High Bridge". Journal of Bridge Engineering. 7 (2): 73–84. doi:10.1061/(ASCE)1084-0702(2002)7:2(73).
  3. Rennick, Robert M. (1987). Kentucky Place Names. University Press of Kentucky. p. 139. ISBN   0813126312 . Retrieved 2013-04-28.
  4. "Engineering Timelines - The Forth Rail Bridge - The Cantilever Principle". Archived from the original on 2008-05-11. Retrieved 2008-06-20.
  5. Poe, Amy (n.d.). "High Bridge". Explore KY History. Retrieved April 1, 2019.
  6. 1 2 3 Powell, Tim (n.d.). "History of High Bridge". World Tim Zone. Retrieved April 21, 2019.
  7. "High Bridge". University of Kentucky . Retrieved 2009-06-17.