Industry | Manufacturer of ammunition components |
---|---|
Founded | 1966 |
Headquarters | 6430 Vista Drive, Shawnee, Kansas 66218 |
Key people | Bruce E. Hodgdon, founder; J.B. Hodgdon; Bob Hodgdon |
Products | smokeless powders; and black powder substitutes |
Website | https://www.hodgdon.com/ |
The Hodgdon Powder Company began in 1952 as B.E. Hodgdon, Inc., and has become a major distributor of smokeless powder for the ammunition industry, as well as for individuals who load their own ammunition by hand. The company's corporate office and manufacturing facilities are located in Kansas, United States. Hodgdon acquired IMR Powder Company in 2003. [1] Winchester branded reloading powders have been distributed in the United States by Hodgdon since March 2006.
In the opening days of World War II, a chemist friend of Bruce E. Hodgdon was casually reminiscing about World War I. He mentioned the quantities of surplus smokeless powder the military had dumped at sea after the war; and speculated how useful that would have been to handloaders struggling through the Great Depression. He anticipated a similar surplus powder situation might occur after World War II. [2] Hodgdon began investigating availability of surplus powder when the war ended; and sales to handloaders began in 1946. One of the first powders he found was 4895 used for loading .30-06 Springfield service ammunition. He purchased 25 tons of government surplus 4895 for $2000 and then purchased two boxcars to store it in preparation for resale at 75 cents per pound. His family initially packaged the powder for resale in the basement of their home. [3] In 1947, he began acquisition of 80 tons of spherical powder salvaged from disassembled .303 British military rifle cartridges manufactured in the United States. By 1949, he was marketing the powder as BL type C. The C was to indicate the powder burned "cooler" than traditional Improved Military Rifle (IMR) powders. [4] In 1949, he began acquisition of powder salvaged from disassembled Oerlikon 20mm cannon cartridges. This powder resembled IMR 4350 in appearance, and with a slower burning rate, was initially marketed as "4350 Data", and later as 4831. [5]
United States powder manufacturers had discontinued production of sporting ammunition during World War II; and after the war attempted to exercise greater product safety control by emphasizing sales of loaded ammunition rather than resuming production of handloading components. [6] A common approach to product safety involved offering ammunition safe for use in the oldest or weakest firearm chambered for that cartridge. Owners of stronger firearms found and experimented with Hodgdon's previously unknown powders to achieve ballistics superior to available factory ammunition for older cartridges like the 7.92×57mm Mauser. [7] Long-range shooters found 4831 was superior to previously available powders for high-capacity bottle-necked cases. [8]
United States powder manufacturers resumed powder sales of one-pound (454 gram) canisters after observing Hodgdon's successful sales to handloaders. DuPont resumed retail distribution of their pre-war nitrocellulose Improved Military Rifle (IMR) series; and Hercules Powder Company resumed production of six of their pre-war double-base powders. Hodgdon Powder Company began using an H-prefix to differentiate powders distributed by Hodgdon from competitors. Surplus Vulcan cannon spherical powder was distributed as H870 beginning in 1959. [9]
All of the surplus BL type C had been sold by 1961. Olin Corporation had manufactured the powder as 846, and continued production for loading 7.62×51mm NATO cartridges. [4] Hodgdon began marketing post-war production as spherical BL-C lot no. 2, or BL-C(2). Olin began retail distribution of Winchester-Western ball powders for pistol and shotgun loading in 1960; and Winchester-Western rifle ball powders followed in 1968. [7] Hodgdon distributed spherical powders HS-5 and HS-6 for shotguns and H110, H335, H380, H414, and H450 for rifles. [10]
DuPont added IMR 4895 to their retail distribution line in 1962, and added IMR 4831 in 1973 when supplies of surplus H4831 were exhausted. [11] Hodgdon then acquired newly manufactured H4831 from Nobel Enterprises in Scotland. The Nobel formulations offer similar ballistic performance, but substitute centralite deterrent coatings for dinitrotoluene used in United States formulations. [7] Handloaders were advised H-prefix powders were not the same as IMR-prefix powders of the same number. [5] Hodgdon distributed H4198 and H4227 similar to IMR powders distributed by DuPont. [10]
Hodgdon's product line includes Pyrodex and Triple Seven, which are modern substitutes for black powder and intended for use in muzzleloaders and certain antique firearms. Consequences of black powder's easy ignition by sparks or static electricity make manufacture and storage hazardous. The sole factory of the United States' largest 20th-century black powder manufacturer was closed by an accidental explosion as 1970 legislation established new regulations discouraging merchants from stocking black powder for sale. Future historical re-enactments with replica firearms appeared doubtful until Hodgdon introduced black powder substitute Pyrodex in 1975 with black powder combustion characteristics and smokeless powder safety. [12]
Handloading, or reloading, is the practice of making firearm cartridges by manually assembling the individual components, rather than purchasing mass-assembled, factory-loaded commercial ammunition.
A centre-fire is a type of metallic cartridge used in firearms, where the primer is located at the center of the base of its casing. Unlike rimfire cartridges, the centerfire primer is typically a separate component seated into a recessed cavity in the case head and is replaceable by reloading the cartridge.
Smokeless powder is a type of propellant used in firearms and artillery that produces less smoke and less fouling when fired compared to black powder. Because of their similar use, both the original black powder formulation and the smokeless propellant which replaced it are commonly described as gunpowder. The combustion products of smokeless powder are mainly gaseous, compared to around 55% solid products for black powder. In addition, smokeless powder does not leave the thick, heavy fouling of hygroscopic material associated with black powder that causes rusting of the barrel.
The .30-06 Springfield cartridge, 7.62×63mm in metric notation, and called the .30 Gov't '06 by Winchester, was introduced to the United States Army in 1906 and later standardized; it remained in military use until the late 1970s. In the cartridge's name, ".30" refers to the nominal caliber of the bullet in inches; "06" refers to the year the cartridge was adopted, 1906. It replaced the .30-03 Springfield, 6mm Lee Navy, and .30-40 Krag cartridges. The .30-06 remained the U.S. Army's primary rifle and machine gun cartridge for nearly 50 years before being replaced by the 7.62×51mm NATO and 5.56×45mm NATO, both of which remain in current U.S. and NATO service. The cartridge remains a very popular sporting round, with ammunition produced by all major manufacturers.
A wildcat cartridge, often shortened to wildcat, is a custom-made cartridge for which ammunition and/or firearms are not mass-produced. These cartridges are often created as experimental variants to optimize a certain ballistic performance characteristic of an existing commercial cartridge, or may merely be intended as novelty items.
The .25-06 Remington was a wildcat cartridge for nearly half a century before being standardized by Remington in 1969.
The 6.5×52mm Carcano, also known as the 6.5×52mm Parravicini–Carcano or 6.5×52mm Mannlicher–Carcano, is an Italian military 6.5 mm rimless bottle-necked rifle cartridge, developed from 1889 to 1891 and used in the Carcano 1891 rifle and many of its successors. A common synonym in American gun literature is "6.5mm Italian." In American parlance, "Carcano" is frequently added to better distinguish it from the rimmed hunting cartridge 6.5×52mmR. Ballistically, its performance is very similar to that of the 6.5×54mm Mannlicher–Schönauer.
Martini–Enfield rifles were, by and large, conversions of the .577/450 Martini–Henry rifle, rechambered for use with the newly introduced .303 British cartridge. Whilst most Martini–Enfields were converted rifles, a number were newly manufactured as well.
The .25-20 Winchester / 6.6x33mmR, or WCF, was developed around 1895 for the Winchester Model 1892 lever action rifle. It was based on necking down the .32-20 Winchester. In the early 20th century, it was a popular small game and varmint round, developing around 1,460 ft/s with 86-grain bullets. But two years earlier Marlin Firearms Co. had already necked down the .32-20 Winchester, and called it the .25-20 Marlin. It was first chambered in Model 1889 lever action Marlins long before Winchester did the same thing and put their name on the .25-20.
The 8×50mmR Lebel rifle cartridge was the first smokeless powder cartridge to be made and adopted by any country. It was introduced by France in 1886. Formed by necking down the 11×59mmR Gras black powder cartridge, the smokeless 8mm Lebel cartridge started a revolution in military rifle ammunition. Standard 8mm Lebel military ammunition was also the first rifle ammunition to feature a spitzer boat tail bullet, which was adopted in 1898. The long-range ballistic performance of the 8mm Lebel bullet itself was exceptional for its time. For use in the magazine tube-fed early Lebel rifle, the 8 mm case was designed to protect against accidental percussion inside the tube magazine by a circular groove around the primer cup which caught the tip of the following pointed bullet. However, the shape of its rimmed bottle-necked case, having been designed for the Lebel rifle's tube magazine, also precluded truly efficient vertical stacking inside a vertical magazine. The bolt thrust of the 8mm Lebel is relatively high compared to many other service rounds used in the early 20th century. Although it was once revolutionary, the 8mm Lebel was declared obsolete after World War I and was soon after replaced with the 7.5×54mm French round.
A black powder substitute is a replacement for black powder (gunpowder), primarily used in muzzleloading firearms. Substitutes may have slightly different properties from gunpowder such as: reduced sensitivity as an explosive, increased efficiency as a propellant powder, different density, and/or reduced ignition efficiency. This also means that substitutes are subject to different restrictions than gunpowder.
A gas check is a gasket type component of firearms ammunition. Gas checks are used when non-jacketed bullets are used in high pressure cartridges. The use of a gas check inhibits the buildup of lead in the barrel and improves accuracy.
The .50-90 Sharps, also known as the .50-21⁄2" Sharps, is a black-powder rifle cartridge cartridge that was introduced by Sharps Rifle Manufacturing Company in 1872 as a buffalo hunting round. Like other large black-powder rounds, it incorporates a heavy bullet and a large powder volume, leading to high muzzle energies.
The .275 Holland & Holland Magnum is a semi-obsolete rifle cartridge similar to the 7mm Remington Magnum. Essentially the .275 Holland & Holland Magnum is a necked down shortened variant of the .375 Holland & Holland Magnum. It was introduced by the British company Holland & Holland with the .375 Holland & Holland Magnum that was introduced in 1912 as the .375 Belted Rimless Nitro-Express. The .375 Holland & Holland Magnum was intended for dangerous African game animals, while the .275 Holland & Holland Magnum was intended for longer range shooting of antelope in Africa and Red Stag in the highlands of Scotland.
Improved military rifle propellants are tubular nitrocellulose propellants evolved from World War I through World War II for loading military and commercial ammunition and sold to civilians for reloading rifle ammunition for hunting and target shooting. These propellants were DuPont modifications of United States artillery propellants. DuPont miniaturized the large artillery grains to form military rifle propellants suitable for use in small arms. These were improved during the First World War to be more efficient in rimless military cartridges replacing earlier rimmed rifle cartridges. Four-digit numbers identified experimental propellants, and a few successful varieties warranted extensive production by several manufacturers. Some were used almost exclusively for military contracts, or commercial ammunition production, but a few have been distributed for civilian use in handloading. Improved military rifle propellants are coated with dinitrotoluene (DNT) to slow initial burning and graphite to minimize static electricity during blending and loading. They contain 0.6% diphenylamine as a stabilizer and 1% potassium sulfate to reduce muzzle flash.
The .276 Enfield (7×60mmRB) was an experimental rebated rim tapered bottlenecked centerfire military rifle cartridge developed in conjunction with the Pattern 1913 Enfield (P'13) rifle. Development was discontinued by the onset of World War I.
Firearm propellants are a specialized type of propellant used to discharge a projectile through the barrel of a firearm. Mixtures of different chemical substances are often used to control the rate of gas release, or prevent decomposition of the propellant prior to use. Short-barrel firearms such as handguns necessitate faster-burning propellants to obtain sufficient muzzle energy, while long guns typically use slower-burning propellants. The pressure relationships between propellant chemical reactions and bullet response are described as internal ballistics.
Ball propellant is a form of nitrocellulose used in small arms cartridges. Ball propellant can be manufactured more rapidly with greater safety and less expense than extruded propellants.
IMR Legendary Powders is a line of smokeless powders which are popularly used in sporting and military/police firearm cartridges. The initials 'IMR' stand for Improved Military Rifle powder. IMR powders makes a line of various types of smokeless powder suitable for loading many cartridges for rifles, handguns, and shotguns.
St. Marks Powder is a subsidiary of General Dynamics Ordnance and Tactical Systems manufacturing ball propellant in Crawfordville, Florida. The company is a member of the Sporting Arms and Ammunition Manufacturers' Institute (SAAMI).