Industrial piercing, scaffold piercing | |
---|---|
Location | Ear cartilage |
Jewelry | Straight barbell |
An industrial piercing (North America), also known as a scaffold piercing (UK/Ireland) or construction piercing, is any ear piercing that consists of two pierced holes connected with a single piece of jewelry. These piercings typically consist of a double perforation of the upper ear cartilage specifically. Two piercings must be made: one is fairly close to the head (known as a forward-helix piercing), while the second one is further down the helix on the opposite side of the ear. Industrial piercings that are vertical are also known as a suicide industrial.
Industrial piercings first appeared in the early 1990s when they were first invented by Erik Dakota along with the Daith piercing and Rook piercing. [1] The first reference to the industrial piercing was in a 1992 edition of Body Play magazine, which referred to this piercing as the “industrial ear project." [2]
Since its introduction, the industrial piercing has become fairly popular among people of all backgrounds since the various styles of industrial jewelry available allows these piercings to be customized to the wearer's preferences. This type of piercing is even popular among celebrities such as Kylie Jenner, Ashley Tisdale, and Miley Cyrus.
Industrial piercings should always be done by a licensed professional with proper anatomical, procedural, and technical knowledge in a sterilized area. [3]
Industrial piercings require two piercings to be made with a piercing needle since the piercings must be precisely aligned to be properly connected with a single piece of jewelry like the barbell jewelry. Piercing guns should never be used for an industrial piercing because they are designed for lobe piercings, not cartilage ones. Additionally, piercing needles are designed for single-use, meaning they have less bacteria, thus decreasing risk for infection. [4] [5]
The barbell jewelry worn with industrials are usually 14G, but may also be 16G. One of the piercings, the forward-helix piercing, is made closer to the head, while the second piercing, the outer-helix piercing, is made on the opposite side of the ear. While barbell jewelry is typically worn during the healing period to maintain piercing alignment, a pair of captive bead rings may be used as an alternative. Using captive bead rings may result in faster recovery times at the risk of the piercings becoming misaligned.
The recovery period for industrial piercings is anywhere between six months and a year. Fresh industrial piercings should only be touched when they are being cleaned. When getting a fresh industrial piercing, it is important to not remove the jewelry as this will give the piercings a chance to be exposed to bacteria and close (this includes replacing the jewelry before the piercings properly heal).[ citation needed ] The piercings should be cleaned regularly to avoid dirt from accumulating, which would increase risk for infection. There are multiple ways to care for industrial piercings, with two being the most common methods. Piercers will typically recommend a particular method to use.
The first method is to use a pre-made saline solution at least twice a day. This method requires soaking a clean cloth with the solution and gently wiping each side of the barbell jewelry. Piercing professionals recommend against using cloths for this method as they may carry bacteria and get caught on the jewelry, thus irritating the piercing. It is important to clean the piercing sites on both sides of the ear repeatedly until the piercing holes are completely clean and crust free. [6]
The second most popular method for cleaning industrial piercings is quite similar to the saline solution method, but requires a DIY sea salt solution. This solution requires a mixture of sea salt and warm water. Professionals recommend mixing one ounce of sea salt into eight ounces of warm water until it completely dissolves. Once this mixture is ready, it must be applied to a clean cloth before gently wiping the piercing sites around the barbell jewelry.
Other tips for industrial piercing aftercare include:
- Wear earphones instead of headphones to avoid applying unnecessary pressure on the piercings
- Avoid sleeping on the recently pierced ear as this will also apply unnecessary pressure. It is recommended to not get both ears pierced at the same time.
A lip piercing is a type of body piercing that penetrates the lips or the area surrounding the lips, which can be pierced in a variety of ways.
A navel piercing is a type of piercing located through the skin of the navel. It is most commonly located on the upper fold of skin, but can also be effected underneath or around the edges of the navel. It may heal quickly and with no irritations, like an ear piercing, or may heal more like a surface piercing with the associated extended healing time. Healing usually takes around 6–12 months, but varies by person due to differences in physiology. Navel piercings reject less frequently than most other surface piercings, but the rejection rate is nonetheless higher than non-surface piercings. A properly effected navel piercing involves piercing the skin surrounding the navel with the initial wound inside of the navel canal. This can be done at any angle where there is a clear flap of skin, but the most prevalent form of navel piercing is through the upper rim of the navel.
A clitoral hood piercing is a female genital piercing through the clitoral hood surrounding the clitoris. The clitoral hood is homologous with the foreskin in the male reproductive system. In addition to being an adornment, a clitoral hood piercing can enhance sexual pleasure during masturbation, foreplay and intercourse. In an empirical study at the University of South Alabama, the authors reported a positive relationship between vertical clitoral hood piercings and desire, frequency of intercourse, and sexual arousal. There are two main types of clitoral hood piercing: the vertical clitoral hood (VCH) piercing and the horizontal clitoral hood (HCH) piercing. As the names indicate, the difference is in the direction the piercing is oriented in the skin above the clitoris. Neither of these piercings penetrates the clitoris itself, although in common parlance they are sometimes called "clit" piercings. The deep hood piercing is a variation of the clitoral hood piercing that passes deeper through the clitoral hood.
Nose piercing is the piercing of the skin or cartilage which forms any part of the nose, normally for the purpose of wearing jewelry, called a nose-jewel. Among the different varieties of nose piercings, the nostril piercing is the most common.
An earring is a piece of jewelry attached to the ear via a piercing in the earlobe or another external part of the ear. Earrings have been worn by people in different civilizations and historic periods, often with cultural significance.
A tongue piercing is a body piercing usually done directly through the center of the tongue. Since its decline in popularity around 2011, it has seen a recent upsurge making it now the second most popular piercing amongst young women aged 18-25 in 2019. It remains unpopular amongst men. Midline tongue piercings, or one hole through the center of the tongue is the most common way to have the tongue pierced.
A dydoe is a type of male genital piercing that passes through the ridge of the glans on the head of the penis. They are often done in pairs. Less often, a "king's crown" is where several dydoes are placed around the head of the penis. The jewelry is usually a 12 gauge, straight barbell with a ball on either end, although a ring may be used at a higher chance of rejection. A deep dydoe is one that uses a longer barbell and exits near the tip of the penis.
A tragus piercing is the perforation of the tragus, which projects immediately in front of the ear canal, for the purpose of inserting and wearing a piece of jewelry. The piercing itself is usually made with a small gauge hollow piercing needle, and typical jewelry would be a small diameter captive bead ring or small gauge post style piercing jewelry. A related piercing is known as the antitragus piercing.
In modern Western body piercing, a wide variety of materials are used. Some cannot be autoclaved, and others may induce allergic reactions, or harbour bacteria. Certain countries, such as those belonging to the EU, have legal regulations specifying which materials can be used in new piercings.
Body piercing jewelry is jewelry manufactured specifically for use in body piercing. The jewelry involved in the art of body piercing comes in a wide variety of shapes and sizes in order to best fit the pierced site. Jewelry may be worn for fashion, cultural tradition, religious beliefs, personal symbolism, and many other reasons.
An ear piercing instrument is a device designed to pierce earlobes by driving a pointed starter earring through the lobe. Piercing guns may be reusable or disposable. Piercing guns are typically used in mall jewelry shops.
Barbell style piercing jewelry is composed of a straight bar with a bead on each end, one or both beads unscrewable for removal and/or changing of the beads. Often one of the beads is fixed, either via epoxy or welding, so that only one bead is used to install or remove the jewelry. Barbell threads are usually right-handed.
Stretching, in the context of body piercing, is the deliberate expansion of a healed piercing for the purpose of wearing certain types of jewelry. Ear piercings are the most commonly stretched piercings, with nasal septum piercings, tongue piercings and lip piercings/lip plates following close behind. While all piercings can be stretched to some degree, cartilage piercings are usually more difficult to stretch and more likely to form hypertrophic scars if stretched quickly. Dermal punching is generally the preferred method for accommodating larger jewelry in cartilage piercings.
A rook piercing is a perforation of the antihelix of the ear for the purpose of wearing jewelry. It is located just above the tragus on the ridge between the inner and outer conch with the piercing passing from the underside to the top of this ridge, differing from many ear piercings that essentially span between a "front" and "back" surface. Erik Dakota, a well known professional piercer and the individual responsible for originating and popularizing the rook piercing, is said to have named this modification after a shortened version of his first name. The piercing was first named in issue #4 of the magazine Body Play and Modern Primitives Quarterly around 1992 alongside the first printed reference to the industrial piercing, then termed "industrial ear project".
A daith piercing is an ear piercing that passes through the ear's innermost cartilage fold, the crus of the helix.
An antitragus piercing is a perforation of the outer ear cartilage for the purpose of inserting and wearing a piece of jewelry. It is placed in the antitragus, a piece of cartilage opposite the ear canal. Overall, the piercing has characteristics similar to the tragus piercing; the piercings are performed and cared for in much the same way.
An orbital piercing is a combination of two ear piercings connected by one piece of jewelry. Usually located in the helix region of the ear, an Orbital Piercing can be done anywhere on the body including your earlobes. The piercing uses a hoop, and is not to be confused with an industrial piercing, a conch piercing or double cartilage piercing.
A hip piercing is a piercing in the pelvic area through the skin near the hip bone. Hip piercings are often done in couplets with one on each hip, but it is not unusual to see only one. Hips piercing are a type of surface piercing. Microdermals or skin divers can be implanted in the hip area to give a similar appearance.
A cartilage piercing can refer to any area of cartilage on the body with a perforation created for the purpose of wearing jewelry. The two most common areas with cartilage piercings are the ear and the nose. Many people outside of the body modification community often informally use the term "cartilage piercing" to refer a helix piercing. The cartilage ear piercing is known to be more sore than the lobe as in the cartilage there is less blood so it takes longer to heal.
A wrist piercing is a piercing through the surface of the wrist, first popularized by Jon Cobb in PFIQ. Wrist piercings are a type of surface piercing. They carry a high rate of rejection and migration, unless they are properly measured and placed. The piercings may be rejected if they are not installed properly; due to the location of the piercings they are easy to irritate, and regularly catch onto clothing or other objects. People with wrist piercings are advised to put on short sleeved t-shirts, singlets so as to prevent the surface barbell from catching onto the threads of the clothing. Also, wrist piercings can only be done with a special tool and thus, it is of high difficulty for it to be home-made. Piercers would also advise that, after getting a wrist piercing, the person is to soak and moisten the wound with mild salted solution so as to disinfect the area, preventing bacteria from entering the unclotted wound. The span of a wrist piercing ranges approximately from as short as 2 weeks to 6 or 7 months.