| AI-20 | |
|---|---|
 | |
| Ivchenko AI-20M turboprop engine | |
| Type | Turboprop |
| National origin | Soviet Union |
| Manufacturer | Ivchenko/ZMKB Progress, PMZ (Perm), AI22 also in KMPO plant |
| Major applications | Antonov An-10 Antonov An-12 Ilyushin Il-18 |
The Ivchenko AI-20 is a Soviet turboprop engine developed by the Ivchenko design bureau in the 1950s. It has been built in large numbers, serving as the powerplant for both the Antonov An-12 transport and the Ilyushin Il-18 airliner.
The AI-20 was the first gas turbine engine developed by the design bureau led by Aleksandr Ivchenko based at Zaporizhia, USSR, which had previously concentrated on small piston engines such as the Ivchenko AI-14 and AI-26 radials. It was designed as a prospective powerplant for the new, large Ilyushin Il-18 airliner and the Antonov An-10, to be powered by four turboprops, in competition with the Kuznetsov NK-4 engines. Both engines were tested on the preproduction batch of 20 Il-18s, but the Ivchenko engine was chosen for full production, [1] possibly due to a crash caused by an inflight failure of an NK-4 engine, and possibly due to the desire for the engines of the Ukrainian An-10 to also be built in Ukraine. [2]
The Il-18B was powered by four Ivchenko AI-20A Series 1 turboprops, each providing a takeoff power of 2,985 kW (4,000 shp) and sustained power of 2,090 kW (2,800 shp) at cruise altitude. Early Il-18A production had initially been fitted with Kuznetsov NK-4 engines, but they were soon exchanged for AI-20s. Later Il-18B production featured AI-20A Series 2 engines, with the same power ratings, but with technical improvements, thus older machines were updated with the Series 2 powerplants. The AI-20s drove four-bladed variable pitch reversible props with a diameter of 4.5 meters (14 feet 9 inches), featuring prominent propeller spinners, and hydraulic actuation for prop pitch. The engines were mounted above the wing and featured integrated fire extinguishers. The engines were started with electric motors, the power for the motors being provided by a ground cart. [3]
The AI-20 is a single-shaft turboprop with a ten-stage axial compressor and a three-stage power turbine, and is designed to run at a constant speed. [4] A big problem with early production engines was the poor reliability of the AI-20 engines, which had a time between overhauls (TBO) in the range of 600 to 750 hours. The AI-20K engine variant was finally introduced, with a TBO of 2,000 hours – unimpressive by modern standards, but a big improvement. One issue that was never addressed was noise; turboprops are relatively noisy and high noise levels were a problem for the passengers. As mentioned, the overhaul life of the engine was initially poor compared with contemporary western engines, being reported as 600–750 hours in 1964, [5] but was later improved by continuous development to 8,000 hours, with a service life of 22,000 hours in the AI-20D series 5M. [6]
Serial production was carried out at Zaporozhye (Motor Sich) and at Perm Engine Plant (UEC-Perm Engines), USSR in 1958, also being built under licence in China as the WJ-6. About 14,000 AI-20s have been built in total. [7]
Data from Jane's All The World's Aircraft 1993–94, [9] Motor Sich website, [8] Aircraft engines of the World 1970 [10]
Comparable engines
Related lists
The Ilyushin Il-18 is a large turboprop airliner that first flew in 1957 and became one of the best known Soviet aircraft of its era. The Il-18 was one of the world's principal airliners for several decades and was widely exported. Due to the aircraft's durability, many examples achieved over 45,000 flight hours and the type remains operational in both military and civilian capacities. The Il-18's successor was the longer-range Ilyushin Il-62.
The Antonov An-8 is a Soviet-designed twin-turboprop, high-wing light military transport aircraft.
The Antonov An-10 Ukraina is a four-engined turboprop passenger transport aircraft designed in the Soviet Union.
The Antonov An-14 Pchelka or Pchyolka, Bdzhilka is a Soviet utility aircraft which was first flown on 15 March 1958. It was a twin-engined light STOL utility transport, with two 300 hp Ivchenko AI-14RF radial piston engines. Serial production started in 1966, and about 300 examples were built by the time production ended in 1972. The An-14 failed to replace the more successful An-2 biplane, which was manufactured until 1990,. The An-14's successor, the An-28 with turboprop engines, is still manufactured at PZL Mielec factories in Poland, under the names PZL M28 Skytruck and PZL M28B Bryza.
The Shvetsov ASh-82 (M-82) is a Soviet 14-cylinder, two-row, air-cooled radial aircraft engine developed from the Shvetsov M-62. The M-62 was the result of development of the M-25, which was a licensed version of the Wright R-1820 Cyclone.
The Kuznetsov Design Bureau was a Russian design bureau for aircraft engines, administrated in Soviet times by Nikolai Dmitriyevich Kuznetsov. It was also known as (G)NPO Trud and Kuybyshev Engine Design Bureau (KKBM).
The PZL 130 Orlik is a Polish turboprop, single engine, two seat trainer aircraft.
The Let L-610 is a prototype aircraft for the Czech civil aircraft manufacturer Let Kunovice made in 1988–1997.
The Progress D-27 is a three-shaft propfan engine developed by Ivchenko Progress, and manufactured by Motor Sich in Ukraine. The gas generator was designed using experience from the Lotarev D-36 turbofan. The D-27 engine was designed to power more-efficient passenger aircraft such as the abandoned Yakovlev Yak-46 project, and it was chosen for the Antonov An-70 military transport aircraft. As of 2019, the D-27 is the only contra-rotating propfan engine to enter service.
Ivchenko-Progress ZMKB, formerly OKB-478 and Ivchenko Lotarev, is a state design bureau that creates drafts and plans for aircraft engines in Zaporizhzhia, Ukraine whose products are widely used in both civil and military aircraft, most notably by Antonov, Beriev, Ilyushin, Tupolev, Mil and Yakovlev. The design bureau works closely with Motor Sich, the turbine manufacturer located in Zaporizhzhia which produces those engines.
The Kuznetsov NK-86 is a low bypass turbofan engine used on the Ilyushin Il-86 rated at 13,000 kgf or 28,600 lbf thrust. It is made by the Soviet Kuznetsov Design Bureau. It is an upgraded version of the Kuznetsov NK-8.
The Tupolev Tu-324 is a 30–50 seat regional jet passenger airliner. The jet will be twin-powered by Ivchenko-Progress AI-22 or Rolls-Royce BR710 turbofan engines. The plane will be available as a corporate plane for eight–ten executives. The range for the three aircraft variants will be 2,500 km, 5,000 km and 7,000 km. The cargo version can carry 3,000 kg of cargo and a range of 5,900 km is expected. The Tu-324 is designed to replace aging Yak-40, Tu-134, An-24 and An-26s on Russia's regional routes.
The Progress D-436 is a triple-spool high-bypass turbofan engine developed by the Ukrainian company Ivchenko-Progress, and manufactured by Motor Sich in Ukraine. It was initially developed to meet the requirements for late versions of the Yakovlev Yak-42 and the Antonov An-72 in the 1980s. The engine first ran in 1985 and was subsequently certified in 1987. Several variants have been developed and are currently in service with a variety of aircraft.
The Antonov/Taqnia An-132 was an improved version of the Antonov An-32 twin-engined turboprop military transport aircraft that was under development jointly by Saudi Arabia and Ukraine. The project was suspended in April 2019 following the withdrawal of Saudi support, and the cancellation of orders from the launch customer RSAF. Subsequently the AN-132D prototype, the only one completed, was heavily damaged in the Battle of Antonov Airport in February, 2022. Since then there has been no further update on the project from Antonov.
The Ivchenko AI-24 turboprop aircraft engine was designed and developed in the late-1950s by the Ivchenko design bureau and manufactured thereafter by Motor Sich. It was designed to power Antonov's successful An-24, An-26 and An-30 aircraft series.
The Progress D-236 was an experimental aircraft engine, a hybrid between a turbofan and a turboprop known as a propfan. Also known as the Lotarev D-236T, the three-shaft geared engine was designed in the 1980s and 1990s to power proposed propfan aircraft such as the Tupolev Tu-334, Ilyushin Il-118, and Ilyushin Il-88.
The Lotarev D-136 is a turboshaft engine from the ZMKB Progress Design Bureau. The engine powers the Mil Mi-26 "Halo" helicopter. Development of the engine had begun in about 1972.. The D-136 first flew on a production Mi-26 helicopter in 1980.
The Kuznetsov NK-4 is a turboprop engine, designed by the Kuznetsov Design Bureau.
