Jiotto Caspita

Last updated
Jiotto Caspita
Jiotto caspita 1st f.jpg
1989 Jiotto Caspita (Mk. I) on display
Overview
Manufacturer Dome Co. Ltd.
Production19891990
Model years 19891993
AssemblyJapan: Maihara
Designer Kunihisa Ito
Body and chassis
Class Sports car (S)
Body style 2-door coupé
Layout Longitudinal rear mid-engine, rear-wheel drive
Doors2
Powertrain
Engine
Transmission 6-speed manual
Dimensions
Wheelbase 2,700 mm (106.3 in)
Length4,534 mm (178.5 in)
4,595 mm (180.9 in) (Mk II)
Width1,996 mm (78.6 in)
Height1,135 mm (44.7 in)
Curb weight 2,425 lb (1,100 kg)
2,734 lb (1,240 kg) (Mk II)
Chronology
Predecessor Dome Zero

The Jiotto Caspita is a prototype mid-engine sports car designed and manufactured by Dome in 1989. The car was billed as the "F1 on the Road." The original design of the car was done by Kunihisa Ito, who was the vice president and chief designer of Jiotto Design Incorporated. [1] Its name is derived from the Italian exclamation "caspita".

Contents

History

The Caspita was the brainchild of Wacoal president Yoshikata Tsukamoto and Dome president Minoru Hayashi. [2] A joint venture between the two companies was formed in July 1988 by the name of Jiotto Inc. (60% held by Wacoal and 40% held by DOME) to design and build the car. The engineering was entrusted to Dome, while the newly incorporated Jiotto Design studio was tasked with designing the car. [1]

The Caspita was displayed at the 28th Tokyo Motor Show in 1989. In light of positive reception, a limited production run of 30 units was considered, but never came to fruition. The project would die out in 1993 due to the collapse of the Japanese asset price bubble, which resulted in a lack of demand for sports cars. [3]

The Mk. I Caspita is currently on display at the Motorcar Museum of Japan in Komatsu, whilst the Mk. II remains in possession of Dome and sits in their museum below the wind tunnel at their headquarters.

Design

The car had a sleek and aerodynamic body design inspired by Group C race cars. [1] Design mockups of 1/5 scale were made for wind tunnel testing. Later, full-size models were made and tested at Dome's own wind tunnel as well as the JARI (Japan Automobile Research Institute) wind tunnel for aerodynamic refinement. Jiotto Design selected three design proposals out of the initially proposed 200 for final development. Out of the three, a design having an integrated rear wing and large side air intakes was fully developed. [1]

The Mk. II Caspita was partially restyled with new twin circular taillights, circular headlights, and more traditionally styled side-view mirrors.

Powertrain

The Mk. I Caspita was built with a detuned Subaru 1235 flat-twelve engine, a Formula One engine originally built by Motori Moderni for Subaru and rated at 450 hp (336 kW; 456 PS) and 363 N⋅m (268 lb⋅ft); [4] it could accelerate the car to 100 km/h from a standstill in 4.7 seconds. [3] After the failure of Subaru's F1 effort, the 1235 was abandoned, leaving Jiotto without an engine supplier. [2]

The Mk. II used a Judd GV V10 engine, with which it was capable of 585 hp (436 kW) at 10,500 rpm and 374 N⋅m (276 lb⋅ft) of torque at 10,500 rpm. [4] This, combined with a curb weight of between 1,240 kg (2,730 lb) [2] and 1,260 kg (2,780 lb), [4] gave the Caspita a claimed 0-100 km/h acceleration time of 3.4 seconds. [4]

Both engines were longitudinally mounted and coupled to a 6-speed gearbox built by Weismann. [1]

Chassis

The Caspita had a bonded aluminium and carbon fibre monocoque chassis made by Mitsubishi Rayon Co., Ltd. The construction technique involved sandwiching aluminium between layers of carbon fibre and curing them in an autoclave to create a rigid structure. The process was repeated 15 times over a span of more than 2 months. [1] This technique resulted in a kerb weight of 1,100 kg (2,425 lb) for the Mk. I Caspita.

Accessed via two gull-wing doors, the Caspita's red-and-black interior was driver-focused and spartan in nature, with no air conditioning, cruise control, or other such driver amenities.

Like its Tokyo Motor Show contemporaries the Mitsubishi HSR-II and Isuzu 4200R, the Caspita employed advanced technology for the time, such as an electronically retractable rear wing and an electronically controlled adjustable suspension system which could raise the car by 2.3 in (58.4 mm). [1] [2]

1989 Jiotto Caspita (Mk. I) rear Jiotto caspita 1st r.jpg
1989 Jiotto Caspita (Mk. I) rear

Specifications (1989 Mk. I Caspita)

Dimensions

Wheelbase2,700 mm (106.3 in)
Front track1,630 mm (64.2 in)
Rear track1,600 mm (63.0 in)
Length4,534 mm (178.5 in)
Width1,996 mm (78.6 in)
Height1,135 mm (44.7 in)
Kerb weight1,100 kg (2,425 lb)
Weight distribution (F/R)40/60
Fuel tank capacity100 L (26 US gal; 22 imp gal)
Wheel sizes9JJ x 17 (front), 13JJ x 17 (rear)
Tyre sizes245/40 ZR17 (front), 335/35 ZR17 (rear)
Brake size332 mm (13.1 in)

Powertrain

ManufacturerMotori Moderni
ConfigurationFlat-12
Valve typeDOHC 5-valve
Bore84 mm (3.3 in)
Stroke52.6 mm (2.1 in)
Total displacement3,497 cc (213.4 cu in)
Specific displacement291.4 cc (17.8 cu in)
AspirationNatural aspiration
Fuel systemElectronic fuel injection
Maximum power456 PS (335.4 kW; 449.8 hp) @ 10,000 rpm
Maximum torque362 N⋅m (267 lb⋅ft) @ 6,000 rpm
Specific power output130 PS (95.6 kW; 128.2 hp) per litre
Specific torque output103.5 N⋅m (76.3 lb⋅ft) per litre

Performance

0-100 km/h (62 mph)4.7 seconds
Top speed320 km/h (199 mph)
Power-to-weight ratio415 PS (305.2 kW; 409.3 hp) per metric ton

Other

Suspension typeIndependent coil-sprung double-wishbone with anti-roll bars (front and rear)
Brake typeVentilated disc
Steering typeRack and pinion
Transmission type6-speed manual
Top gear ratio1.00
Final drive ratio3.75
1990 Jiotto Caspita (Mk. II) front Osaka Auto Messe 2014 (66) JIOTTO CASPITA.JPG
1990 Jiotto Caspita (Mk. II) front
1990 Jiotto Caspita (Mk. II) rear Osaka Auto Messe 2014 (67) JIOTTO CASPITA.JPG
1990 Jiotto Caspita (Mk. II) rear

Specifications (1990 Mk. II Caspita)

Dimensions

Wheelbase2,700 mm (106.3 in)
Front track1,630 mm (64.2 in)
Rear track1,600 mm (63.0 in)
Length4,595 mm (180.9 in)
Width1,996 mm (78.6 in)
Height1,135 mm (44.7 in)
Kerb weightunknown; between 1,240 kg (2,730 lb) and 1,260 kg (2,780 lb)
Weight distribution (F/R)40/60
Fuel tank capacity100 L (26 US gal; 22 imp gal)
Wheel sizes9JJ x 17 (front), 13JJ x 17 (rear)
Tyre sizes245/40 ZR17 (front), 335/35 ZR17 (rear)
Brake size332 mm (13.1 in)

Engine

ManufacturerJudd
Configuration72-degree V10
Valve typeDOHC 4-valve
Bore92 mm (3.6 in)
Stroke52.6 mm (2.1 in)
Total displacement3,497 cc (213.4 cu in)
Specific displacement349.7 cc (21.3 cu in)
AspirationNatural aspiration
Fuel systemElectronic fuel injection
Maximum power585 PS (430.3 kW; 577.0 hp) @ 10,750 rpm
Maximum torque385 N⋅m (284 lb⋅ft) @ 10,500 rpm
Specific power output167 PS (122.8 kW; 164.7 hp) per litre
Specific torque output110.1 N⋅m (81.2 lb⋅ft) per litre

Performance

0-100 km/h (62 mph)3.4 seconds (claimed)
Top speed320 km/h (199 mph)
Power-to-weight ratio415 PS (305.2 kW; 409.3 hp) per metric ton

Other

Suspension typeIndependent coil-sprung double-wishbone with anti-roll bars (front and rear)
Brake typeVentilated disc
Steering typeRack and pinion
Transmission type6-speed manual
Top gear ratio1.00
Final drive ratio3.75

See also

Related Research Articles

<span class="mw-page-title-main">McLaren F1</span> British sports car designed and manufactured by McLaren Automotive

The McLaren F1 is a sports car designed and manufactured by British automobile manufacturer McLaren Cars and powered by the BMW S70/2 V12 engine. The original concept was conceived by Gordon Murray, who successfully convinced Ron Dennis to back the project and hired car designer Peter Stevens to design the exterior and interior of the car. On 31 March 1998, the XP5 prototype with a modified rev limiter set the Guinness World Record for the world's fastest production car, reaching 240.1 mph (386.4 km/h), surpassing the modified Jaguar XJ220's 217.1 mph (349 km/h) record from 1993.

<span class="mw-page-title-main">Mitsubishi Lancer Evolution</span> Motor vehicle by Mitsubishi Motors

The Mitsubishi Lancer Evolution, popularly referred to as the 'Evo', is a sports sedan and rally car based on the Lancer that was manufactured by Japanese manufacturer Mitsubishi Motors from 1992 until 2016. There have been ten official versions to date, and the designation of each model is most commonly a Roman numeral. All generations use two-litre intercooled turbo inline four-cylinder engines and all-wheel drive systems.

<span class="mw-page-title-main">Lotus Esprit</span> British sports car

The Lotus Esprit is a sports car built by Lotus Cars from 1976 to 2004 at their Hethel, England factory. It has a rear mid-engine, rear-wheel-drive layout. Together with the Lotus Elise / Exige, it is one of Lotus' most long-lived models.

A World Rally Car is a racing automobile built to the specific regulations set by the Fédération Internationale de l'Automobile (FIA) and designed for competition in the World Rally Championship (WRC). The cars were introduced in 1997 as a replacement for Group A regulations used in the manufacturers' championship, and were replaced by Group Rally1 in 2022.

<span class="mw-page-title-main">Ferrari 360</span> Italian two-seater sports car

The Ferrari 360 is a two-seater, mid-engine, rear wheel drive sports car manufactured by Italian automotive manufacturer Ferrari from 1999 until 2005. It succeeded the Ferrari F355 and was replaced by the Ferrari F430 in 2004.

<span class="mw-page-title-main">Ferrari F430</span> V8 sports car manufactured by Italian automobile manufacturer Ferrari as a successor to the 360

The Ferrari F430 is a sports car produced by the Italian automobile manufacturer Ferrari from 2004 until 2009 as a successor to the Ferrari 360. The car is an update to the 360 with exterior and performance changes. It was unveiled at the 2004 Paris Motor Show. The F430 was succeeded by the 458 which was unveiled on 28 July 2009.

<span class="mw-page-title-main">Ferrari 599</span> Grand Tourer produced by Ferrari from 2006–2012 as a successor to the 575M

The Ferrari 599 GTB Fiorano is a grand tourer produced by Italian automobile manufacturer Ferrari. It was the brand's front engined, two-seat model that replaced the 575M Maranello in 2006 as a 2007 model, and was replaced for the 2013 model year by the F12berlinetta.

<span class="mw-page-title-main">Pagani Zonda</span> Mid-engine sports car manufactured by Italian sports car manufacturer Pagani from 1999–2019

The Pagani Zonda is a mid-engine sports car produced by Italian sports car manufacturer Pagani. It debuted at the 1999 Geneva Motor Show. Produced on commission in limited units, as of 2019 a total of 140 cars had been built, including development mules. Variants include a 2-door coupé and roadster variant, along with a third new variant being the barchetta. Construction is mainly of carbon fibre.

<span class="mw-page-title-main">Koenigsegg CCX</span> Swedish mid-engine sports car

The Koenigsegg CCX is a mid-engine sports car manufactured by Swedish automotive manufacturer Koenigsegg Automotive AB. The project began with the aim of making a global car, designed and engineered to comply with global safety and environment regulations, particularly to enter the United States car market. To sell cars in the US, many alterations were made to the design of the CCR; the previously used Ford Modular engine was replaced by an in-house developed Koenigsegg engine designed to run on 91 octane fuel, readily available in the United States, and to meet Californian emission standards.

Dome Co. Ltd, literally "child's dream", is a Japanese racing car constructor involved mainly in open-wheel and sports car racing.

<span class="mw-page-title-main">Brabham BT49</span> Formula One racing car

The Brabham BT49 is a Formula One racing car designed by South African Gordon Murray for the British Brabham team. The BT49 competed in the 1979 to 1982 Formula One World Championships and was used by Brazilian driver Nelson Piquet to win his first World Championship in 1981.

<span class="mw-page-title-main">Supermarine Aircraft Spitfire</span> Type of aircraft

The Supermarine Aircraft Spitfire is an American homebuilt aircraft produced in kit form by Supermarine Aircraft. A replica of the famous British Supermarine Spitfire World War II fighter, it was originally produced to 75% scale. Subsequent models have increased the scale of the fuselage and added a second seat.

<span class="mw-page-title-main">Dome F105</span>

The Dome F105 was an unraced Formula One car designed and built by the Japanese motorsport constructor, Dome.

<span class="mw-page-title-main">Pagani Huayra</span> Mid-engined Italian sport car

The Pagani Huayra is a mid-engine sports car produced by Italian sports car manufacturer Pagani, succeeding the company's previous offering, the Zonda. It is named after Wayra Tata, the Quechua wind god. The Huayra was named "The Hypercar of the Year 2012" by Top Gear magazine. On 11 February 2015 it was reported that the Pagani Huayra has been sold out. The Huayra was limited to just 100 units as part of Pagani's agreement with engine supplier Mercedes-AMG.

The Subaru 1235 was a motor racing engine designed and built by Motori Moderni, and funded by Subaru for the Japanese manufacturer’s Formula One program in 1990. A 3.5-litre boxer-12, it was used by the Coloni team for the first eight races, but proved to be very unsuccessful and the team reverted to using the old Cosworth DFR V8 engine. Alba also used it in the World Sportscar Championship in 1990, but were similarly unsuccessful and switched to a 4.5-litre Buick V6 midway through the season.

<span class="mw-page-title-main">McLaren 570S</span> Sports car

The McLaren 570S is a sports car designed and manufactured by British car manufacturer McLaren Automotive from 2015 until 2021. It was unveiled at the 2015 New York International Auto Show.

<span class="mw-page-title-main">McLaren 720S</span> Sports car

The McLaren 720S is a sports car designed and manufactured by British automobile manufacturer McLaren Automotive. It is the second all-new car in the McLaren Super Series, replacing the 650S beginning in May 2017.

<span class="mw-page-title-main">Bugatti Divo</span> Limited production track-focused sports car manufactured by Bugatti based on the Chiron

The Bugatti Divo is a mid-engine track-focused sports car developed and manufactured by Bugatti Automobiles S.A.S. The car is named after French racing driver Albert Divo, who raced for Bugatti in the 1920s winning the Targa Florio race twice. It was revealed on 24 August 2018 at “The Quail – A Motorsports Gathering“ in California, United States.

The GMA is a 4.0-litre, naturally aspirated V12 engine, commissioned by Gordon Murray, and developed and produced by Cosworth for the Gordon Murray Automotive T.50 & T.33 sports cars. The road-going engine is rated at 663 PS at 11,500 rpm, with a max torque figure of 467 N⋅m (344 lbf⋅ft) at 9,000 rpm, making it the highest revving road car engine ever produced. The engine is also more powerful than the 6.1 L (6,064 cc) S70/2 V12 engine used in the McLaren F1, making more power from four litres than the S70/2 made from 6.1 litres.

References

  1. 1 2 3 4 5 6 7 "[EXCLUSIVE] - Jiotto Caspita - FULL STORY". ACI. Retrieved 2020-05-22.
  2. 1 2 3 4 Padeanu, Adrian. "Concept We Forgot: Jiotto Caspita". Motor1.com. Retrieved 2020-05-22.
  3. 1 2 "Jiotto Caspita, Japan's original supercar". Motor Authority. Retrieved 2020-05-22.
  4. 1 2 3 4 Orlove, Raphael (June 27, 2017). "The Jiotto Caspita Was One Of The Greatest Supercars That Never Was". Jalopnik . Retrieved May 22, 2020.