Koenigsegg CCX | |
---|---|
Overview | |
Manufacturer | Koenigsegg Automotive AB |
Production | 2006–2010 [1] (29 produced) |
Model years | 2006–2010 |
Assembly | Ängelholm, Sweden |
Designer |
|
Body and chassis | |
Class | Sports car (S) |
Body style | 2-door targa top |
Layout | Rear mid-engine, rear-wheel-drive |
Platform | Koenigsegg CC |
Doors | Dihedral Synchro-Helix |
Powertrain | |
Engine | 4.7 L Koenigsegg twin supercharged V8 |
Power output | 806 hp (817 PS; 601 kW) |
Transmission | 6-speed manual 6-speed sequential |
Dimensions | |
Wheelbase | 2,660 mm (104.7 in) |
Length | 4,293 mm (169.0 in) |
Width | 1,996 mm (78.6 in) |
Height | 1,120 mm (44.1 in) |
Curb weight | 1,456 kg (3,210 lb) |
Chronology | |
Predecessor | Koenigsegg CCR |
Successor | Koenigsegg Agera |
The Koenigsegg CCX is a mid-engine sports car manufactured by Swedish automotive manufacturer Koenigsegg Automotive AB. The project began with the aim of making a global car, designed and engineered to comply with global safety and environment regulations, particularly to enter the United States car market. To sell cars in the US, many alterations were made to the design of the CCR; the previously used Ford Modular engine was replaced by an in-house developed Koenigsegg engine designed to run on 91 octane fuel, readily available in the United States, and to meet Californian emission standards. [4] [5]
The name CCX is an abbreviation for Competition Coupé X, the X commemorating the 10th anniversary (X being the Roman numeral for ten) of the completion and test drive of the first CC prototype in 1996. [6]
The CCX was unveiled at the 2006 Geneva Motor Show, sporting body modifications to meet US vehicle regulations and a new in-house developed 4.7L twin supercharged V8 engine capable of generating a maximum power output of 817 PS (601 kW; 806 hp) at 7,000 rpm and 920 N⋅m (679 lb⋅ft) of torque at 5,500 rpm while running on 91 octane gasoline.
The new engine is of all-aluminium construction made out of 356 aluminium with a T7 heat treatment to further enhance block integrity and cylinder bore chill during casting. Specifically created and cast for Koenigsegg by Grainger & Worrall, a casting specialist with F1 experience in drivetrain components, the engine was built, assembled and tested at their Ängelholm production plant. [5] The engine is lubricated with a dry sump system with a separate oil pump and the pistons are cooled by means of an internal cooler that sprays oil onto them in order to run high cylinder pressure with 91 octane fuel making it capable of 14 mpg‑US (17 L/100 km; 17 mpg‑imp) in combined cycle and 18 mpg‑US (13 L/100 km; 22 mpg‑imp) in highway travel. [7] Available transmissions are a CIMA 6-speed manual and a 6-speed sequential manual transmission. Power is fed to the wheels through a torque-sensitive limited slip differential. [8]
The chassis is made from carbon fibre reinforced with kevlar and aluminium honeycomb like the previous models. While the body keeps the targa top body style and the dihedral synchro-helix actuation doors, [9] it is completely reworked. There is a new front bumper design, enhanced brake cooling, fog lamps, US patented head lamps, a new fresh air intake on the bonnet that acts as ram air booster, air intakes behind the front wheels to enhance airflow and a glass window over the engine.
The CCX has a frontal area of 2,894 sq in (1.867 m2) and a drag coefficient of Cd =0.32., with a CdA of 0.56 m2 (6.0 sq ft). It also has a flat underside with venturi tunnels at the rear and an optional rear spoiler to improve downforce. [8] At 200 km/h (124 mph) there is 60 kg (130 lb) of downforce over the front axle and 65 kg (143 lb) over the rear. [10] The car is 88 mm (3.5 in) longer to comply with the US rear impact regulations and to free space around the rear muffler. On the interior, there is 51 mm (2.0 in) of extra headroom as well as specifically designed Sparco carbon fibre seats. [11]
First in the industry carbon fibre wheels are optional equipment, 3 kilograms (6.6 lb) lighter than the standard forged alloy telephone-dial wheels, both using centre locking nuts. Diameter is 19 inches at the front and 20 inches at the rear equipped with 255/35 Y19 front, 335/30 Y20 rear Michelin Pilot Sport 2 tyres, 8 piston caliper carbon ceramic brakes measuring 380 mm (15 in) in diameter at the front and 6 piston caliper 362 mm (14.3 in) at the rear are optional, saving another 2 kg (4.4 lb) of unsprung weight. [5] [8]
The CCXR is a more "environmentally friendly" version of the CCX, powered by the same engine, but converted to use E85 and E100 ethanol fuel, as well as standard 98 octane petrol. [12] The CCXR required modified fuel injectors, upgraded fuel lines and piston rings, and a higher boost setting on the superchargers. In standard form, bodywork of the CCXR features heavily optimized aerodynamics, along with optional diffusers to enhance airflow, including an optional front splitter with an aerodynamic nolder. [13] [14] When run on ethanol, the power increases to 1,032 PS (759 kW; 1,018 hp) at 7000 rpm and 1,060 N⋅m (782 lb⋅ft) of torque at 5600 rpm. This is a direct result of the cooling properties of ethanol in the engine's combustion chambers along with the added boost, made possible by ethanol's higher octane rating when compared to gasoline. [12] [15] Due to the lower specific energy content of ethanol, the CCXR burns slightly more fuel than the CCX with a combined fuel consumption of 22 L/100 km (13 mpg‑imp; 11 mpg‑US) under the EU cycle.
At the 2008 Geneva Motor Show, Koenigsegg presented two special edition models, the CCX Edition and the CCXR Edition, both fitted with a remapped, 4.8 L twin-supercharged V8 engine and limited to 2 and 4 units respectively. [16] The modifications to the engine increase the power of the CCX Edition to 900 PS (662 kW; 888 hp) on normal gasoline and 940 N⋅m (693 lb⋅ft) of torque while the CCXR Edition ratings remained unchanged over the CCXR.
The Edition models are more track oriented compared to the standard models, being equipped with stiffer springs and anti-roll bars, new dampers and a lowered chassis, a bare carbon body, unique 11-spoke aluminium wheels with a unique rear wing, and a larger front splitter and side winglets, all of which make the car capable of producing 350 kg (772 lb) of downforce at 250 km/h (155 mph). [17] [18] The interior is also reworked and features; colour matched leather carpets, Koenigsegg Edition side step plates and Edition chronograph instrument cluster. All other extra equipment for the Koenigsegg CCX and CCXR Edition comes as standard which include optional carbon fibre wheels, a rearview camera, Satnav or Bluetooth, amplifiers, and an exhaust system made entirely from inconel.
Later, Koenigsegg also built two CCXR Special Edition cars which when compared to the old CCXR Edition had equipped with the double F1 wing, a revised aero package with a unique and larger front splitter and side winglets, wheel vents on top of the body, as well as Koenigsegg's first F1 Paddleshift system. [19]
The CCXR Trevita is a limited edition of the Koenigsegg CCXR featuring a diamond weave carbon fibre finish. Trevita is an abbreviation in Swedish and translates into "three whites". [20] The Koenigsegg Proprietary Diamond Weave, fully developed by Koenigsegg, is a new and unique method to manufacture the carbon fibre used for the CCXR Trevita. By utilising this new and unique method, Koenigsegg managed to coat the fibres with a diamond finish. The fibre treatment is conducted carefully in small quantities, prior to further processing the pre-production material. [21]
Initially, three CCXR Trevitas were planned to be produced, however, because of the complexity to make the special diamond weave carbon-fibre, only 2 were ever made, making it one of the rarest vehicles manufactured by Koenigsegg. Both cars featured the Koenigsegg Shimmering Diamond Weave bodywork, twin-deck carbon fibre rear wing, inconel exhaust system, carbon ceramic brakes with ABS, airbags, F1 paddle-shift gearbox, chrono instrument cluster, infotainment system, tire monitoring system and a hydraulic lifting system. [22] The Trevita is also one of the most expensive sports cars, costing US$4.8 million. [23] One was owned by boxer Floyd Mayweather until it was sold in 2017 for 2.6 million dollars.
Models | CCX | CCXR | CCX Edition | CCXR Edition/Trevita/Special Edition | |
---|---|---|---|---|---|
Engine configuration: Twin supercharged DOHC 4-valve V8 | |||||
Displacement | 4.7 L (286.8 cu in) | 4.8 L (292.9 cu in) | |||
Power | 806 PS (593 kW; 795 hp) at 6900 rpm [24] | 1,018 PS (749 kW; 1,004 hp) at 7000 rpm | 900 PS (662 kW; 888 hp) at 7000 rpm | 1,018 PS (749 kW; 1,004 hp) at 7000 rpm | |
Torque | 920 N⋅m (679 lb⋅ft) at 5700 rpm [24] | 1,060 N⋅m (782 lb⋅ft) at 5600 rpm | 940 N⋅m (693 lb⋅ft) at 5800 rpm | 1,080 N⋅m (797 lb⋅ft) at 5600 rpm | |
Performance (mfr estimates) | |||||
0-100 km/h (62 mph) | 3.2 | 3.1 | 3.0 | 2.9 | |
0-200 km/h (124 mph) | 9.8 | 8.9 | 9.1 | 8.8 | |
0-200 km/h (124 mph)-0 | 14.0 | 13.7 | 13.9 | 13.0 | |
Top speed | over 395 km/h (245 mph) | over 400 km/h (249 mph) |
In order to compete in the FIA GT Championship Koenigsegg created the CCGT race car, based on the production CC model range; making its debut appearance at the 2007 Geneva Motor Show and built to comply with the ACO and FIA regulations for the GT1 class. [25]
The CCGT's engine is based on the unit used in the Koenigsegg CCX with the superchargers removed and the capacity increased to 5.0 L to compensate for the loss of power. [25] The CCGT had over 600 kg downforce and over 600 hp normally aspirated, racing restricted hp. [26] Due to the already lightweight construction of the road-going model it was based on, the weight was easily reduced under the minimum 1,100 kg (2,425 lb), which means that the Ballast can be placed optimally in order to meet the mandatory weight.
Two months after the car completed its first shakedown runs, the FIA GT1 regulations were suddenly changed, according to the altered regulations, carbon monocoques were disallowed and there had to be a minimum of 350 road cars produced per year of the model that was to compete, something that Koenigsegg was unable to achieve, prohibiting the CCGT from racing. [27]
On 14 July 2023, the CCGT was sold for £3,319,000 (inclusive of buyer's premium) in Bonhams Goodwood Festival of Speed auction. [28] [29]
The CCX was produced between 2006 and 2010 and the total production amounted to 49 cars (30 CCX, 9 CCXR, 6 CCX/CCXR Edition, 2 CCXR Special Edition and 2 CCXR Trevita). One of them was a CCX used for Crash tests and the other was a CCXR which is still a factory test car. Some CCX cars have later been upgraded to CCXR-specifications.
In 2007, the CCX was the fastest car to complete Top Gear 's Power Lap with a time of 1:17.6 (until it was beaten by the Ascari A10 with a time of 1:17.3). [31] The car originally lapped the circuit in 1:20.4, but was then fitted with an optional rear wing to provide downforce after The Stig spun it off the track at 130 mph due to a power steering failure. The Stig purportedly recommended this modification, predicting that the car would then be the fastest ever round Top Gear's track [32] but Koenigsegg later stated that the improvement was due to adjustments to the chassis and suspension settings and not the addition of the rear spoiler. Despite this, the Stig's spoiler-idea remained the credited reason for the improved lap time. [33] The name of the car on the lap board is "Koeniggggsenisseggsegnignigsegigiseg CCX2 with the Top Gear wing", reportedly because none of the Top Gear presenters knew how to spell Koenigsegg, and also poking fun at the long and hard pronunciation of the manufacturer's name.
Koenigsegg Automotive AB is a Swedish manufacturer of high-performance sports cars based in Ängelholm, Skåne County, Sweden.
The Koenigsegg CCR is a mid-engine sports car manufactured by Koenigsegg and the successor to the company's previous offering, the CC8S.
The Koenigsegg CC8S is a mid-engine sports car produced by the Swedish automobile manufacturer Koenigsegg. It was the company's first production automobile and the first production car to use the company's trademark dihedral synchro-helix actuation doors. At its introduction, it won several awards, including the Guinness World Record for the Most Powerful Production Engine and design awards from both Red Dot in Germany and Utmärkt Svensk Form in Sweden.
The Bentley Continental GT is a grand touring car manufactured and marketed by the British company Bentley Motors since 2003. A two-door coupé or convertible, and has four seats, it was the first new Bentley released after the company's acquisition by Volkswagen AG in 1998, and the first Bentley to employ mass production manufacturing techniques. It was later joined by the Bentley Continental Flying Spur, a four-door saloon car variant.
A Formula One car or F1 car is a single-seat, open-cockpit, open-wheel formula racing car with substantial front and rear wings, and an engine positioned behind the driver, intended to be used in competition at Formula One racing events. The regulations governing the cars are unique to the championship and specify that cars must be constructed by the racing teams themselves, though the design and manufacture can be outsourced. Formula One drivers experience peak cornering forces of up to six lateral g.
The Lotus Exige is a sports car made by the British company Lotus Cars from 2000 until 2021. Originally a coupé version of the Lotus Elise roadster, since the Series 3 the Exige has been the larger-engined model of the family, featuring a V6 engine in place of the Elise's straight-four. Convertible versions of both models are available.
The Ferrari 599 GTB Fiorano is a grand tourer produced by the Italian automobile manufacturer Ferrari. It served as the brand's front-engined, two-seat model, replacing the 575M Maranello in 2006 as a 2007 model, and was later replaced for the 2013 model year by the F12berlinetta.
The Ultima GTR is a supercar manufactured by Ultima Sports Ltd of Hinckley, Leicestershire, England. The car was available both in kit form and as a "turnkey" vehicle until early 2015, when it was replaced by the Ultima Evolution. The design is mid engined, rear wheel drive layout, with a tubular steel space frame chassis and GRP bodywork. A convertible version called the Ultima Can-Am was also produced. Kit builders were free to source and fit a variety of engines and transmissions but the Chevrolet small block V8 supplied by American Speed mated to either a Porsche or Getrag transaxle was the factory recommended standard, and this configuration was fitted to all turnkey cars.
The Chevrolet Corvette (C6) is the sixth generation of the Corvette sports car that was produced by Chevrolet division of General Motors for the 2005 to 2013 model years. It is the first Corvette with exposed headlamps since the 1962 model. Production variants include the Z06, ZR1, Grand Sport, and 427 Convertible. Racing variants include the C6.R, an American Le Mans Series GT1 championship and 24 Hours of Le Mans GTE-Pro winner.
The Aston Martin DBS is a grand tourer based on the DB9 and manufactured by the British luxury automobile manufacturer Aston Martin.
The Caparo T1 is a British mid-engine, rear-wheel drive, two-seat automobile that was built by Caparo Vehicle Technologies, founded by design director Ben Scott-Geddes, engineering director Graham Halstead, engineers formerly involved in the development of the McLaren F1 and Sean Butcher, marketing director and financier. The T1 was inspired by Formula One design, and intended as a relatively affordable road legal racing car. The T1 was scheduled for production in mid-2007 for a price of £235,000 with approximately 25 cars per year built.
The fifth-generation Ford Mustang, is a two-door four-seater pony car manufactured and marketed by Ford from 2004 to 2014, for the 2005 to 2014 model years — carrying the internal designation S197 and marketed in coupe and convertible body styles. Assembly took place at the Flat Rock Assembly Plant in Flat Rock, Michigan. The fifth generation began with 2005 model year, and received a facelift for the 2010 model year.
The Koenigsegg Agera is a mid-engine sports car produced by Swedish car manufacturer Koenigsegg. It is a successor to the CCX/CCXR. The name comes from the Swedish verb 'agera' which means "to act" or in imperative form "(You) act".
The Pagani Huayra is a mid-engine sports car produced by Italian sports car manufacturer Pagani, superseding the company's previous offering, the Zonda. It is named after Wayra Tata, the Quechua wind god. The Huayra was named "The Hypercar of the Year 2012" by Top Gear magazine. On 11 February 2015 it was reported that the Pagani Huayra had been sold out. The Huayra was limited to just 100 units as part of Pagani's agreement with engine supplier Mercedes-AMG.
The McLaren 650S is a British sports car designed and manufactured by British automobile manufacturer McLaren Automotive. It was announced in February 2014 as a new model, but based on the existing MP4-12C with 25% new parts, and was formally unveiled at the 2014 Geneva Motor Show.
The Koenigsegg Regera is a limited production, plug-in hybrid grand touring sports car manufactured by Swedish automotive manufacturer Koenigsegg. It was unveiled at the March 2015 Geneva Motor Show. The name Regera is a Swedish verb, meaning "to reign" or "to rule". Koenigsegg produced 85 Regeras, most of which were sold upon unveiling.
The McLaren 570S is a sports car designed and manufactured by the British car manufacturer McLaren Automotive, produced from 2015 until 2021. It was unveiled at the 2015 New York International Auto Show.
The McLaren 720S is a sports car designed and manufactured by British automobile manufacturer McLaren Automotive. It is the second all-new car in the McLaren Super Series, replacing the 650S beginning in May 2017.
The Koenigsegg Jesko is a limited production mid-engine sports car produced by the Swedish automobile manufacturer Koenigsegg. The car was introduced at the 2019 Geneva Motor Show and was completely sold out before the show ended. Succeeding the Agera, the Jesko is named as a tribute to the company founder's father, Jesko von Koenigsegg. There are two variations of the car, the "Absolut" and the "Attack".
The Koenigsegg Gemera is a limited production four-seat plug-in hybrid grand tourer to be manufactured by the Swedish automobile manufacturer Koenigsegg. It was unveiled on 3 March 2020 at an online broadcast by Koenigsegg at the cancelled Geneva Motor Show.