LB&SCR B2 class

Last updated

LB&SCR B2, B2X and B3 classes
B2 Bessemer.jpg
B3 class No. 213 Bessemer as built
Type and origin
Power typeSteam
Designer R. J. Billinton
Builder Brighton Works
Build date1895–1898
Total produced25
Rebuild date1907–1916
Specifications
Configuration:
   Whyte 4-4-0
   UIC 2'Bn
Gauge 4 ft 8+12 in (1,435 mm) standard gauge
Leading dia. 3 ft 6 in (1.067 m)
Driver dia.6 ft 9 in (2.057 m)
Total weightB2: 76 long tons 156 cwt (85.1 t)
B3: 78 long tons 4 cwt (79.5 t)
Fuel type Coal
Boiler pressure160 psi (11.03 bar; 1.10 MPa)
Cylinders Two, inside
Cylinder size 18 in × 26 in (457 mm × 660 mm)
Performance figures
Tractive effort B2 14,144 lbf (62.9 kN)
B2X 15,028 lbf (66.8 kN)
Career
Class B2, B3, B2x
Withdrawn1929–1933
DispositionAll Scrapped

The London, Brighton and South Coast Railway (LB&SCR) B2 class was a class of small 4-4-0 steam locomotives intended for express passenger work on the LB&SCR London to Portsmouth line. They were designed by R. J. Billinton and built at Brighton works from 1895 to 1897. They proved to be reliable locomotives but barely adequate for the heaviest trains and acquired the nickname Grasshoppers. As a result the B3 class was developed from the B2, and the B2X class was later rebuilt from these locomotives with larger boilers.

Contents

History

When R. J. Billinton took over as chief mechanical engineer of the LB&SCR in 1890, following the sudden death of William Stroudley, the London to Brighton trains were adequately served by Stroudley's Gladstone class but the lighter Portsmouth expresses were beginning to struggle behind his G class singles. Billinton therefore designed a small 4-4-0, specifically for these services. However, during the course of 1892-1893 the London-to-Brighton trains began to increase in weight, and the board of governors of the railway agreed to invest money in larger turntables and so Billinton was able to enlarge his design further to make them more generally useful. [1]

Three locomotives appeared in 1895, with a further eight in 1896 and fourteen in 1897. They were named after famous politicians, bankers and railway engineers. The new design was clearly influenced by the locomotives of Samuel Waite Johnson on the Midland Railway, for whom Billinton had previously worked, and were the first LB&SCR locomotives to have leading bogie wheels. It incorporated Billinton's C2 class boiler. They proved to be adequate for the lightly loaded Portsmouth express trains but barely so for heavier trains. They also tended to ride unevenly and consequently acquired the nickname of grasshoppers by their crews.

B3 and B2X classes

As a result of the complaints about the use of the class on the Brighton line, Billinton fitted the last locomotive in the class No. 213 Bessemer, with a larger boiler when new, which thereafter became known as the B3 class. This caused a slight improvement in performance but not one significant enough to alter the entire class at that time. However, once the original boilers were worn out, it became more of an economic proposition to do so. Thus between October 1907 and 1910, Billinton's successor Douglas Earle Marsh rebuilt the entire class (including 213 Bessemer) with the improved boiler used on his C3 class, thereby creating the B2X class.

The rebuilt locomotives were a significant improvement in both looks and performance and were used on the heaviest expresses to Portsmouth and Hastings and semi-fast trains on the Brighton line.

Post-grouping

All 25 locomotives were still in regular use in December 1922, at the grouping of the railways of southern England to form the Southern Railway. The class continued to find useful work on secondary passenger services between London and the south coast until 1929, when the impending electrification of the Brighton line began to make them redundant. They were thus all withdrawn between June 1929 and March 1933, and none have survived in preservation.

Accidents and incidents

Locomotive summary

LB&SCR no.Build dateRebuilt B2xLBSCR nameRenamed/dateSR no.Date withdrawn
171June 1897August 1910 Nevill -2171May 1931
201January 1897January 1909 Rosebery -22011930
202February 18971909 Trevithick -2202September 1931
203March 1897February 1909 Henry Fletcher -2203October 1930
204March 1897March 1911 Telford -2204July 1929
205April 1897March 1910 Hackworth -2205November 1931
206April 1897January 1909 Smeaton -2206March 1933
207June 1897July 1909 Brunel -2207October 1931
208August 1897January 1911 Abercorn -2208June 1929
209September 1897April 1913 Wolfe Barry -2209September 1930
210October 1897February 1909 Fairbairn -2210July 1931
211November 1897June 1910 Whitworth -2211October 1930
212January 1898February 1910 Armstrong -2212July 1930
213January 1898November 1908 Bessemer -2213April 1932
314June 1895April 1911 Charles C. Macrae -2314April 1930
315June 1895March 1909 Duncannon J. Gay 2315April 1933
316June 1895July 1916 Goldsmid -23161930
317June 1896October 1908 Gerald Loder -2317June 1929
318June 1896July 1910 Rothschild -2318July 1930
319September 1896June 1914 John Fowler Leconfield 2319April 1930
320September 1896July 1910 Rastrick -23201932
321September 1896October 1907 John Rennie -2321September 1930
322September 1896September 1908 G.P. Bidder -2322June 1931
323December 1896September 1908 William Cubitt -2323November 1932
324January 1897May 1913 John Hawkshaw -23241932

Related Research Articles

<span class="mw-page-title-main">London, Brighton and South Coast Railway</span> British pre-grouping railway company

The London, Brighton and South Coast Railway was a railway company in the United Kingdom from 1846 to 1922. Its territory formed a rough triangle, with London at its apex, practically the whole coastline of Sussex as its base, covering a large part of Surrey. It was bounded on its western side by the London and South Western Railway (L&SWR), which provided an alternative route to Portsmouth. On its eastern side the LB&SCR was bounded by the South Eastern Railway (SER)—later one component of the South Eastern and Chatham Railway (SE&CR)—which provided an alternative route to Bexhill, St Leonards-on-Sea, and Hastings. The LB&SCR had the most direct routes from London to the south coast seaside resorts of Brighton, Eastbourne, Worthing, Littlehampton and Bognor Regis, and to the ports of Newhaven and Shoreham-by-Sea. It served the inland towns and cities of Chichester, Horsham, East Grinstead and Lewes, and jointly served Croydon, Tunbridge Wells, Dorking and Guildford. At the London end was a complicated suburban and outer-suburban network of lines emanating from London Bridge and Victoria, and shared interests in two cross-London lines.

<span class="mw-page-title-main">William Stroudley</span> English railway engineer

William Stroudley was an English railway engineer, and was one of the most famous steam locomotive engineers of the nineteenth century, working principally for the London, Brighton and South Coast Railway (LB&SCR). He designed some of the most famous and longest-lived steam locomotives of his era, several of which have been preserved.

<span class="mw-page-title-main">Brighton railway works</span> Railway workshops in Brighton, Sussex, England

Brighton railway works was one of the earliest railway-owned locomotive repair works, founded in 1840 by the London and Brighton Railway in Brighton, England, and thus pre-dating the more famous railway works at Crewe, Doncaster and Swindon. The works grew steadily between 1841 and 1900 but efficient operation was always hampered by the restricted site, and there were several plans to close it and move the facility elsewhere. Nevertheless, between 1852 and 1957 more than 1200 steam locomotives as well as prototype diesel electric and electric locomotives were constructed there, before the eventual closure of the facility in 1962.

<span class="mw-page-title-main">LB&SCR B1 class</span>

The London, Brighton and South Coast Railway B1 Class is a class of 0-4-2 express passenger steam locomotives, known from the name of the first, No. 214, as the "Gladstones".

<span class="mw-page-title-main">LB&SCR E2 class</span> Steam locomotive class

The London, Brighton and South Coast Railway (LB&SCR) E2 class was a class of 0-6-0 T steam locomotives designed by Lawson Billinton, intended for shunting and short distance freight trains. Ten examples were built between 1913 and 1916, and were withdrawn from service and scrapped between 1961 and 1963.

<span class="mw-page-title-main">LB&SCR B4 class</span>

The B4 class were 4-4-0 steam locomotives for express passenger work on the London, Brighton and South Coast Railway. They were designed by R. J. Billinton and were either built at Brighton works 1899–1902 or else by Messrs Sharp, Stewart and Company in 1901. Twelve members of the class were rebuilt from 1922 to 1924 by L. B. Billinton with a larger boiler, cylinders and a superheater. The rebuilt locomotives were classified B4X.

<span class="mw-page-title-main">LB&SCR E3 class</span>

The London, Brighton and South Coast Railway E3 class were 0-6-2T side tank steam locomotives. One prototype was designed by William Stroudley shortly before his death, but was completed by R. J. Billinton, who later built sixteen further locomotives.

<span class="mw-page-title-main">LB&SCR K class</span> Class of mixed traffic steam engines

The LB&SCR K class were powerful 2-6-0 mixed traffic locomotives designed by L. B. Billinton for the London, Brighton and South Coast Railway (LB&SCR) in 1913. They appeared shortly before the First World War and the first ten examples of the class did prodigious work during that conflict on munitions, supply and troop trains. Further examples were built after the war, and the class was used as a test bed for various items of specialised equipment. However, after the formation of the Southern Railway in 1923 the remaining three locomotives on order were not completed and the seventeen members of the class led relatively quiet yet reliable lives over their traditional lines. The locomotives proved their usefulness once again during the Second World War, and continued to provide reliable service until the 1960s. The entire class was eventually withdrawn in 1962 for 'bookkeeping' rather than 'operational' reasons.

Robert John Billinton was the Locomotive, Carriage, Wagon and Marine Superintendent of the London, Brighton and South Coast Railway from 1890 until his death.

Douglas Earle Marsh (1862–1933) was an English railway engineer, and was the Locomotive, Carriage and Wagon Superintendent of the London, Brighton and South Coast Railway from November 1904 until his early retirement on health grounds in July 1911.

<span class="mw-page-title-main">LB&SCR E1 class</span>

The London, Brighton and South Coast Railway E1 Class were 0-6-0T steam locomotives designed by William Stroudley in 1874 for short-distance goods and piloting duties. They were originally classified E, and generally known as "E-tanks"; They were reclassified E1 in the time of D. E. Marsh.

<span class="mw-page-title-main">LB&SCR D3 class</span>

LB&SCR D3 class was a 0-4-4T tank locomotive designed by R. J. Billinton for the London, Brighton and South Coast Railway (LB&SCR) between 1892 and 1896. They were built for working passenger trains along country and main lines.

<span class="mw-page-title-main">LB&SCR L class</span>

The LB&SCR L Class was a class of 4-6-4 steam tank locomotives designed by L. B. Billinton for the London, Brighton and South Coast Railway. They were known as the "Brighton Baltics", Baltic being the European name for the 4-6-4 wheel arrangement. Seven examples were built between April 1914 and April 1922 and they were used for express passenger services.

<span class="mw-page-title-main">LB&SCR D1 class</span>

The LB&SCR D1 class were powerful 0-4-2 suburban passenger tank locomotives, designed by William Stroudley of the London Brighton and South Coast Railway in 1873. They were originally known as "D-tanks" but later reclassified as class D1. Members of this very successful class survived in service until 1951.

<span class="mw-page-title-main">LB&SCR G class</span>

The LB&SCR G class were powerful 2-2-2 locomotives, designed by William Stroudley of the London, Brighton and South Coast Railway in 1874.

<span class="mw-page-title-main">LB&SCR E6 class</span>

The London, Brighton and South Coast Railway E6 class was a class of 0-6-2T side tank steam locomotive designed by Robert Billinton. They were introduced in 1904 and were a development of the E5 class with smaller driving wheels intended for heavy short and medium-distance freight trains.

<span class="mw-page-title-main">LB&SCR Belgravia class</span>

The LB&SCR Belgravia class were 2-4-0 passenger locomotives designed by William Stroudley of the London Brighton and South Coast Railway (LB&SCR) in 1872 for secondary passenger duties.

<span class="mw-page-title-main">LB&SCR H1 class</span>

The London, Brighton and South Coast Railway (LB&SCR) H1 class was a class of 4-4-2 steam locomotives for express passenger work. They were designed by D. E. Marsh and were built by Messrs Kitson and Company in 1905 and 1906.

<span class="mw-page-title-main">LB&SCR H2 class</span> British steam locomotive

The London, Brighton and South Coast Railway H2 class was a class of 4-4-2 steam locomotives for express passenger work. They were designed when D. E. Marsh was officially Locomotive Superintendent, and were built at Brighton Works in 1911 and 1912. As Marsh had worked on the Great Northern Railway as Chief Assistant to Henry Ivatt, the design closely followed that of the GNR Class C1.

<span class="mw-page-title-main">LB&SCR I3 class</span>

The LB&SCR I3 class was a class of 4-4-2 steam tank locomotives designed by D. E. Marsh for suburban passenger service on the London, Brighton and South Coast Railway.

References

  1. Bradley, D.L. (1972). The locomotives of the London, Brighton & South Coast Railway: Part 2. The Railway Correspondence and Travel Society. p. 109. ISBN   0-901115-21-5.
  2. Moody, G. T. (1979) [1957]. Southern Electric 1909-1979 (Fifth ed.). Shepperton: Ian Allan Ltd. p. 37. ISBN   0 7110 0924 4.