LCF II

Last updated
LCF II
RoleSingle seat Club Class training glider
National origin Germany
DesignerLuftsportclub der Zeppelinstadt Friedrichshafen
First flight22 March 1975
Number built1

The LCF II is a single seat Club Class glider, designed and built in the 1970s by German glider club members and intended to be suitable for training, competition and in particular aerobatics. Only one was completed.

Contents

Design and development

Design of the LCF II began in 1971, at the beginning of a decade that saw increasing interest in aerobatic glider flight. The intention was to produce a general purpose club glider, capable of being used as a trainer or in standard gliding competitions but also able to take the stresses involved in aerobatics. [1] [2] The manoeuvrability required for the latter requires the ability to fly slowly and to rotate rapidly, calling for relatively short spans. The LCF II has a span of 13 m (42 ft 8 in). [2]

The straight tapered, square tipped wings of the LCF II are mounted at shoulder height and built around a single wooden spar. The ribs are formed from polyvinyl chloride rigid foam and the wings plywood covered. The wing mounts Schempp-Hirth type airbrakes, which extend from the upper surfaces. [1]

The fuselage of the LCF II is built around a steel tube structure, covered by glassfibre in front and fabric covered aft, producing a tapering hexagonal cross section from the leading edge rearwards. A long, single piece canopy extends back almost to the leading edge, where it blends smoothly into the upper fuselage line. At the rear the tailplane is attached to the top of the fuselage; the vertical surfaces are straight tapered and square tipped. All rear surfaces are foam filled and ply covered. The LFC II has a fixed monowheel undercarriage, partly recessed into the fuselage, and a tailwheel. [1]

It took five air club members about 4,000 hours to build the LCF II, which made its first flight on 22 March 1975. [1]

Operational history

In 1975 the LCF II won first prize at the annual meeting of the Oskar-Ursinus-Vereinigung, the equivalent of the Experimental Aircraft Association. Plans were put in place for Scheibe Flugzeugbau to build the LCF II, but no orders were forthcoming and no Scheibe aircraft were constructed. [1] It was intended that the LCF II should also be built by amateurs [1] but it seems that, in the end, the prototype was only example of its type. This aircraft, registered D-6466, remained on the German civil register in 2010, listed as a Scheibe LCF II. [3]

A second glider was built by Klaus Roth which was finished in 2012. German call sign is D-1622. Serial number: 002

Specifications

Data from Gliders and Sailplanes of the World [1]

General characteristics

Performance

Related Research Articles

Slingsby Skylark 4 British competition glider, 1961

The Slingsby T.50 Skylark 4 was a British single seat competition glider built by Slingsby Sailplanes in the early 1960s. It sold in numbers and had success at national, though not world level competition.

Akaflieg München Mü10 Milan German two-seat glider, 1934

The Akaflieg München Mü10 Milan is a two-seat glider aircraft that was designed in Germany in 1934. Only one copy of the design was built.

The Czerwiński Sparrow, sometimes known as the de Havilland Canada glider, was a single seat glider, designed and built by a group of de Haviiland engineers in Canada in 1942. It was intended to popularise gliding and be suitable for both basic training and thermal soaring.

Scheibe Zugvogel German single-seat glider, 1954

The Scheibe Zugvogel is a West German, high-wing, single-seat, FAI Open Class glider that was produced by Scheibe Flugzeugbau. The first version was designed by Rudolph Kaiser and subsequent versions by Egon Scheibe.

SZD-51 Junior

The PZL Bielsko SZD-51 Junior is a Polish single-seat training and club sailplane.

The Akaflieg Darmstadt D-28 Windspiel was a single-seat, high-performance sailplane designed in Germany in the early 1930s. Intended to exploit a growing understanding of thermal soaring, it was small and manoeuvrable, with a 12 m span; silk-covered for lightness, it weighed less (empty) than its pilots. It held the world straight-line distance record for a time in 1934.

The Akaflieg Braunschweig SB-12 is a single seat, Standard Class sailplane designed around 1980 by German technical university students to test out a new wing profile from the German Aerospace Centre. It was not intended for production, but the sole SB-12 remains active in 2010.

Bréguet 905 Fauvette Single-seat French glider, 1958

The Bréguet Br 905 Fauvette is a single-seat, standard class, competition sailplane, designed and produced in France from the late 1950s. Some 50 were built but most remained grounded after a structural accident in 1969; a few remain airworthy.

The Horikawa H-23B-2 is a two-seat training glider designed and built in Japan in the 1950s. It was produced in small numbers.

The Kometa-Standard was a Standard Class glider, designed and built in Bulgaria in the early 1960s. Thirty were flown by local gliding clubs.

DFS Rhönsperber German single seat competition glider, 1937

The DFS Rhönsperber, otherwise known as the Schweyer Rhönsperber or Jacobs Rhönsperber was a single seat competition glider designed in Germany by Hans Jacobs and first flown in 1935. For several years it was regarded as the best German sailplane and about one hundred were built.

Schleicher Rhönbussard German training glider, 1933

The Schleicher Rhönbussard, otherwise known as the DFS Rhönbussard was intended as an intermediate glider trainer which could also fly competitively. It was designed by Hans Jacobs in Germany in the early 1930s. More than 200 were built.

Scheibe Specht German two-seat glider, 1953

The Scheibe Specht is a tandem seat training glider produced in Germany in the early 1950s. More than fifty were built.

The Scheibe SF-30 Club-Spatz is a 15 m class single seat sailplane built in Germany in the 1970s and intended for club use.

The VFW-Fokker FK-3 is a single seat competition glider, built in Germany in the late 1960s. It had success at the Italian and Austrian national contests of 1968, resulting in a short production run the following year.

Orlican VT-16 Orlik

The Orlican VT-16 Orlik is a single-seat club glider, serving Czech gliding clubs and setting several national records in the early 1960s.

Zlin Z-25 Šohaj

The Zlín Šohaj series of club gliders began as a post World War II development of the DFS Olympia Meise. A large number were built in the 1940s and '50s.

Czerwiński CW 7

The Czerwiński CW 7 was a Polish aerobatic glider first flown in 1934. Despite a structural weakness that prevented inverted flight, a small batch of CW 7s were used by several aeroclubs until the start of World War II.

The Jancsó-Szokolay M22 was a Hungarian single-seat sailplane first flown in 1937. Twenty were built and the type set several national records. Some remained in service up to about 1953.

The PZL M-3 Pliszka (Wagtail) was the first all-metal Polish glider. Three were built but its performance, particularly its glide ratio, was not good enough for it to be produced for Polish clubs.

References

  1. 1 2 3 4 5 6 7 Hardy, Michael (1982). Gliders & Sailplanes of the World. London: Ian Allan Ltd. pp. 64–5. ISBN   0 7110 1152 4.
  2. 1 2 3 "Glider aerobatics on the increase". Flight . Vol. 113 no. 3597. 25 February 1978. p. 490.
  3. ↑ Partington, Dave (2010). European registers handbook 2010. Air Britain (Historians) Ltd. p. 136. ISBN   978-0-85130-425-0.
  4. ↑ "The Incomplete Guide to Airfoil Usage". Archived from the original on 20 April 2010. Retrieved 28 August 2012.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.